1999 Subaru Forester Owner's Manual - Page 45
1999 Subaru Forester Manual
Page 45 highlights
Doors and locks 3. Press the Emergency Override/Programming button. The system will disarm. B Valet mode HS1004CB Valet Mode prevents the security system from arming, yet allows all keyless entry and convenience features to function normally. The valet button is built into the status indicator, located on the dash to the left of the steering wheel. To engage Valet Mode: D With the system disarmed and the vehicle ignition off, press the Status Indicator/Valet Button. D The status indicator will begin to emit a quick double-flash pattern. This indicates that the system is in Valet Mode. D To exit Valet Mode, press the Status Indicator/Valet Button again. The status indicator will turn off, indicating the system is in normal operating mode. B Trip identification If the siren chirps four times when you disarm your security system, this indicates that the system was triggered in your absence. Before turning the ignition on, perform the following operation to determine the protected zone that triggered the system. D Open the vehicle door and press the Emergency Override/Programming button. - CONTINUED - 1-19