2000 Subaru Forester Owner's Manual - Page 30

Doors and locks This indicates that the system is in the Transmitter Programming Mode. Do not release the Programming button. 4. Press the "LOCK" button on the new transmitter. The door locks will cycle once. 5. Repeat step 4 for any additional transmitters. 6. Exit the Transmitter Program Mode by releasing the Programming button and turning the vehicle ignition off. Test all remote transmitters to ensure that they work properly. n To delete a lost or stolen transmitter 1. Follow step 1 to 3 as described above. 2. Re-program the remaining transmitters as described in step 4. D If there is only one remaining transmitter, perform step 4 four times. D If there are two remaining transmitters, perform step 4 twice for each transmitter. B System maintenance Your keyless entry system does not require any specific maintenance except for occasionally changing the transmitter battery. The 12-volt battery in the remote transmitter should last approximately one year, depending on usage. When the battery begins to weaken, you will notice a decrease in range, or the distance from your vehicle that the remote transmitter will operate. n To change the remote transmitter battery CAUTION Do not let dust, oil or water get on or in the transmitter when replacing the battery. - CONTINUED - 1-11