2000 Subaru Forester Owner's Manual - Page 97

Instruments and controls Warning and indicator lights Several of the warning and indicator lights come on momentarily and then go out when the ignition switch is initially turned to the "ON" position. This permits checking the operation of the bulbs. Apply the parking brake and turn the ignition switch to the "ON" position. The following lights come on: Seat belt warning light SRS airbag system warning light Charge warning light Oil pressure warning light Brake system warning light CHECK ENGINE warning light/Malfunction indicator lamp ABS warning light (if equipped) AT OIL TEMP warning light (automatic transmission vehicles) If any lights fail to come on, it indicates a burned-out bulb or a malfunction of the corresponding system. Consult your authorized SUBARU dealer for repair. J Seat belt warning light and chime When the ignition switch is turned to the "ON" position, the seat belt warning light will come on and the reminder chime will sound to remind driver to fasten the seat belt. The seat belt warning light remains on for about six seconds and turns off automatically after six seconds. The seat belt reminder chime will turn off when the driver's side seat belt is buckled or it will turn off automatically after about six seconds. J SRS airbag system warning light AIRBAG When the ignition switch is turned to the "ON" position, the SRS airbag system warning light will come on for about six seconds and go out. This shows the SRS airbag system is in normal operation. If this light comes on while driving or does not go out after the engine starts, it may indicate that the SRS airbag system is not working properly. Contact your nearest SUBARU dealer immediately. - CONTINUED - 3-5