2002 Subaru Outback Owner's Manual - Page 107

2. Connect the white (1 pole) connector. 3. Turn the ignition switch from the "LOCK" to the "ON" position. 4. Install the side sill cover. To place the system in active arming mode (remote required for activation), disconnect the white connector. n Arming the system CAUTION In passive mode, the system will automatically activate the alarm but WILL NOT automatically lock the doors. In order to lock the doors you must either lock them as indicated in step 4 below or with the key once they have been closed. Failure to lock the doors manually will result in a higher security risk. HB2031BB HB2024DB 1. Turn the ignition switch to the "ON" position. 2. Turn the ignition switch from "ON" to "LOCK" position and remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Before closing the doors, lock all doors with the inside door lock levers. 5. Close the doors. The system will automatically arm after one minute. 2-18