2002 Subaru Outback Owner's Manual - Page 443
2002 Subaru Outback Manual
Page 443 highlights
Maintenance and service 3. Using a Phillips screwdriver, remove the upper and lower screws that secure the side cover of the rear combination light assembly. 4. Remove the bulb socket from the rear combination light assembly by turning it counterclockwise. HBB048BB HBB025BB 5. Remove the bulb from the socket. Turn signal light: Pull the bulb out of the socket. Brake/tail light: Remove the bulb from the socket by pushing it and turning it counterclockwise. 6. Install a new bulb in the socket. 7. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks. 8. Using a Phillips screwdriver, install the side cover to the rear combination light assembly. 9. Fit the rear combination light assembly into the vehicle body and tighten the nuts from the interior of the vehicle. 10. Reinstall the light bulb replacement service hole covers. - CONTINUED - 11-63