2004 Subaru Baja Owner's Manual - Page 189

Audio " Tone control The volume control dial (1) normally function as volume control. The dial become a control for Bass, Middle note or Treble when you select the appropriate tone control mode. Choose desired level for each mode by turning the volume control dial. The control function returns to volume control mode after about 5 seconds. To change control modes: Each brief press of the "AUDIO" button (2) changes control modes in the following sequence starting from bass control mode. (When the radio is first turned on, the control mode is in the volume control.) To change control modes: Each brief press of the "BAL" button (3) changes control modes in the following sequence starting from fader control mode. (When the radio is turned on, the control mode is in the volume control.) Fader (FADER) Balance (BALANCE) Volume (VOLUME) Bass (BASS) Middle (MIDDLE) Volume Treble (TREBLE) (VOLUME) " Fader and balance control The volume control dial (1) normally function as volume control. The dial become the controls for Fader or Balance when you select the appropriate fader and balance control mode. Choose desired setting for each mode by turning the volume control dial. The control function returns to volume control mode after about 5 seconds. " Display illumination dimness cancellation (BRIGHT) The brightness of the radio display dims when the light switch is in the " " or " " positions. If this makes the display difficult to read, press the volume dial for more than 1.5 seconds to return the display to original brightness. Subsequently pressing the volume dial again for more than 1.5 seconds or if you can safely do so, turning the light switch to the OFF position and back to the " " or " " position makes the radio display dim again. ! FM/AM selection button " FM button Press the "FM" button (4) for FM reception. The radio will toggle between FM1 and FM2 settings each time 5-20