2004 Subaru Outback Owner's Manual - Page 437
2004 Subaru Outback Manual
Page 437 highlights
2Maintenance and service 2. Check the fluid level of the reservoir tank. When the fluid is hot after the vehicle has been run: Check that the oil level is between "HOT MIN" and "HOT MAX" on the surface of the reservoir tank. When the fluid is cool before the vehicle is run: Check that the oil level is between "COLD MIN" and "COLD MAX" on the surface of the reservoir tank. 3. If the fluid level is lower than the applicable "MIN" line, add the recommended fluid as necessary to bring the level between the "MIN" and "MAX" line. If the fluid level is extreme low, it may indicate possible leakage. Consult your SUBARU dealer for inspection. Brake fluid Checking the fluid level Recommended fluid "Dexron III" Type Automatic Transmission Fluid Never let brake fluid contact your eyes because brake fluid can be harmful to your eyes. If brake fluid gets in your eyes, immediately flush them thoroughly with clean water. For safety, when performing this work, wearing eye protection is advisable. Brake fluid absorbs moisture from the air. Any absorbed moisture can cause a dangerous loss of braking performance. If the vehicle requires frequent refilling, there may be a leak. If you suspect a problem, have the vehicle checked at your SUBARU dealer. Never use different brands of brake fluid together. When adding brake fluid, be careful not to allow any dirt into the reservoir. Never splash the brake fluid over painted sur- 11-36