2002 Toyota Sienna Owners Manual

2002 Toyota Sienna Manual

2002 Toyota Sienna manual content summary:

  • 2002 Toyota Sienna | Owners Manual - Page 1
    02 SIENNA_U (L/O 0107) SECTION Overview of instruments and controls 1− 1 OPERATION OF INSTRUMENTS AND CONTROLS Instrument panel overview ...2 Instrument cluster overview ...5 Indicator symbols on the instrument panel ...7 2002 MY SIENNA_U (OM45407U) 1
  • 2002 Toyota Sienna | Owners Manual - Page 2
    light or front interior light switch 8. Front personal lights or front interior light 9. Power door lock switches 10. Power window switches 11. Glove box 12. Auxiliary boxes 13. Tilt steering lock release lever 14. Hood lock release lever 15. Parking brake pedal 16. Window lock switch 2 2002
  • 2002 Toyota Sienna | Owners Manual - Page 3
    's seat belt reminder light 4. Emergency flasher switch 5. Front air conditioning controls 6. Rear fan speed selector or rear fan position selector 7. Rear window and outside rear view mirror defoggers switch 8. Car audio 9. Seat heater switches 10. Ashtray 11. Power sliding door switches 12
  • 2002 Toyota Sienna | Owners Manual - Page 4
    02 SIENNA_U (L/O 0107) 19. Tire pressure warning system reset switch or traction control system off switch 20. Theft deterrent system/Engine immobiliser system indicator light 21. Power rear view mirror control switches 22. Instrument panel light control dial 4 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 5
    02 SIENNA_U (L/O 0107) Instrument cluster overview "With tachometer 1. Engine coolant temperature gauge 2. Tachometer 3. Service reminder indicators and indicator lights 4. Speedometer 5. Fuel gauge 6. Trip meter reset knob 7. Odometer and two trip meters 2002 MY SIENNA_U (OM45407U) 5
  • 2002 Toyota Sienna | Owners Manual - Page 6
    02 SIENNA_U (L/O 0107) "Without tachometer 1. Engine coolant temperature gauge 2. Service reminder indicators and indicator lights 3. Speedometer 4. Odometer and two trip meters 5. Fuel gauge 6. Trip meter reset knob 6 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 7
    skid control system/traction control system warning light∗1 or Malfunction indicator lamp∗1 Low windshield washer fluid level warning light∗1 Low fuel level warning light∗1 Low tire pressure warning light∗1 Low engine oil pressure warning light∗1 Turn signal indicator lights 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 8
    indicator light∗2 Automatic transmission indicator lights Slip indicator light Traction control system off indicator light ∗1 : ∗2 : For details, see "Service reminder indicators and warning buzzers" in Section 1 −5. If this light flashes, see "Cruise control" in Section 1 −6. 8 2002 MY
  • 2002 Toyota Sienna | Owners Manual - Page 9
    10 Engine immobiliser system ...13 Front doors ...14 Sliding door ...16 Power sliding door ...19 Wireless remote control ...24 Power windows ...30 Power rear quarter windows ...32 Center side windows and manual rear quarter windows ...33 Back door ...33 Hood ...34 Theft deterrent system ...35 Fuel
  • 2002 Toyota Sienna | Owners Manual - Page 10
    the sub key with the attendant. Since the front doors and sliding doors can be locked without a key, you should always system to function correctly, so be careful not to lose these keys. If you make your own duplicate key, you will not be able to cancel the system or start the engine. 10 2002
  • 2002 Toyota Sienna | Owners Manual - Page 11
    the front doors and sliding doors can be stop soon after it starts. If this happens, remove the key once and then insert it again after taking off other transponder keys (including keys of other vehicles) from the ring or while gripping or covering them with your hand to start the engine. 2002
  • 2002 Toyota Sienna | Owners Manual - Page 12
    not cover the key grip with any material that cuts off electromagnetic waves. z Do not knock the key hard against other objects. z Do not leave the key exposed to high temperatures for a long period, such as on the dashboard safe place. z Do not bend the key grip. 12 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 13
    from the ignition switch. The indicator light will start flashing to show the system is set. If any of the following indicator conditions occurs, contact your Toyota dealer. NOTICE Do not modify, remove or disassemble the engine immobiliser system. If any unauthorized changes or modifications
  • 2002 Toyota Sienna | Owners Manual - Page 14
    02 SIENNA_U (L/O 0107) Front doors For vehicles sold in U.S.A. FCC ID: MOZ RI −4BTY MADE IN JAPAN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
  • 2002 Toyota Sienna | Owners Manual - Page 15
    rear side. All the doors lock or unlock simultaneously. CAUTION Before driving, be sure that the doors are closed and locked, door with the lock knob in the lock position will also lock the front door. Be careful not to lock your keys in the vehicle. Vehicles with power door lock system-The door
  • 2002 Toyota Sienna | Owners Manual - Page 16
    FROM OUTSIDE To close the fully −opened sliding door, pull the outside handle toward you and then close the door. Lock release button LOCKING AND UNLOCKING WITH KEY the knob upward. WITH To open the sliding door, push the lock release button and then open the door. 16 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 17
    and other parts of the bodies of all occupants away from the sliding door. Otherwise, they will be possibly caught and pinched by the closing door causing an unexpected serious injury. NOTICE Do not close the sliding door by applying the brakes. Doing so could cause the door to be damaged. 2002 MY
  • 2002 Toyota Sienna | Owners Manual - Page 18
    sliding door system after locking the child−protectors. When opening the left side sliding door, it stops at the half −opened position if the fuel filler door is opened. Left and right side power sliding door models-The left side power sliding door does not operate when the fuel filler door is
  • 2002 Toyota Sienna | Owners Manual - Page 19
    has the following functions: When the power sliding door system is on, you can open and close the sliding door with the "DOOR L", "DOOR R" and "PWR DOOR" switches inside the vehicle or "POWER DOOR", "D−PWR DOOR" and "P−PWR DOOR" switches of the wireless remote control transmitter even if the sliding
  • 2002 Toyota Sienna | Owners Manual - Page 20
    pillar again. Opening and closing can be performed by the "DOOR L", "DOOR R" and "PWR DOOR" switches under the following conditions: D The sliding door is unlocked. D The power sliding door system is on. Center pillar (The "PWR DOOR pushed out.) OFF" switch is 20 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 21
    . OPEN POWER SLIDING WARNING LIGHT AND BUZZER DOOR This light on the instrument panel comes on if the power sliding door is not completely closed with the ignition key in the "ON" position. (See "Service reminder indicators and warning buzzers" in Section 1−5.) 2002 MY SIENNA_U (OM45407U) 21
  • 2002 Toyota Sienna | Owners Manual - Page 22
    . Before operating the power sliding door, make sure there is nobody near the sliding door. Make sure the sliding door stops at the fully −opened position, and then allow the passengers to get on and off the vehicle. D Never try jamming any part of your body to make the jam protection function
  • 2002 Toyota Sienna | Owners Manual - Page 23
    D The open power sliding door warning light stays on though the sliding door is closed. In this case, initialize and reset the system by doing the following steps from 1 to 10. CAUTION To initialize and reset power sliding door system, stop the vehicle on a level ground. 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 24
    remote control If the power sliding door system does not operate properly after the above procedure, there may be a problem in the system. Contact your Toyota dealer. The wireless remote control system allows you to lock or unlock all the doors from a distance within approximately 1 m (3 ft.) of
  • 2002 Toyota Sienna | Owners Manual - Page 25
    is on initially and after battery replacement.) To switch the beep on and off: With the driver's door opened- 1. Insert the ignition key and remove it. 2. Within 5 not followed exactly, the beep will not operate as expected. Check the beep ON/OFF operation by pushing the wireless remote control
  • 2002 Toyota Sienna | Owners Manual - Page 26
    "D−PWR DOOR" and "P−PWR DOOR" switches under the following conditions only: "PANIC (LOCK)" SWITCH (left and right side power sliding door models) Pushing and holding the "PANIC (LOCK)" switch blows the horn intermittently and flashes the headlights, tail lights and other exterior lights. The "PANIC
  • 2002 Toyota Sienna | Owners Manual - Page 27
    . To stop alarm midway, do the following: D Push any of the switch on the wireless remote control transmitter. D Push any of the switch on the wireless remote control transmitter. D Lock or unlock either front doors or back door with the key. D Lock or unlock either front doors or back door with
  • 2002 Toyota Sienna | Owners Manual - Page 28
    that may cause undesired operation. REPLACING TRANSMITTER BATTERY For replacement, use a CR2032 lithium battery or equivalent. CAUTION Special care should be taken that small children do not swallow the removed transmitter battery or components. D Check for closeness to a radio transmitter
  • 2002 Toyota Sienna | Owners Manual - Page 29
    equivalent, open the transmitter case. 2. Remove the discharged transmitter battery. 3. Put a new transmitter battery with positive (+) side up. Close side and negative side of the transmitter battery should be faced correctly. z Do not replace the battery with wet hands. Water may cause unexpected
  • 2002 Toyota Sienna | Owners Manual - Page 30
    or oils do not adhere to the transmitter case. z Close the transmitter case securely. After replacing battery, check that the transmitter operates properly. If the transmitter still does not operate properly, contact your Toyota dealer. The windows can be operated with the switch on each front door
  • 2002 Toyota Sienna | Owners Manual - Page 31
    are closed, they work for 43 seconds even after the ignition switch is turned off. It stops working when either front door is opened. Window lock switch CAUTION D Never try jamming any part of your body to make the jam protection function work intentionally. D The jam protection function may not
  • 2002 Toyota Sienna | Owners Manual - Page 32
    side. D Always make sure the heads, hands and other parts of the bodies of all occupants are kept completely inside the vehicle before you doors are closed, they work for 43 seconds even after the ignition switch is turned off. They stop working when either front door is 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 33
    Unattended children can be involved in serious accidents. Back door To open the window, pull the latch handle toward you and swing it fully out. open the back door, pull the lever. Vehicles with power door lock system-All the doors lock and unlock simultaneously with back door. 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 34
    back door, use the inside strap or handle for easier reach to the back door. To close the back door, lower it and press down on it. After closing the back door loading luggage. CAUTION Strap Keep the back door closed while driving. This not only back door dampers, do not apply any force, paint
  • 2002 Toyota Sienna | Owners Manual - Page 35
    , sliding or back doors or hood is forcibly unlocked or the battery terminal is disconnected and then reconnected when the vehicle is locked. The alarm blows the horn intermittently and flashes the headlights, tail lights and other exterior lights. CAUTION After inserting the support rod into the
  • 2002 Toyota Sienna | Owners Manual - Page 36
    and back doors and hood are closed after the alarm stops, the system automatically resets the alarm. SETTING THE SYSTEM 1. Turn the ignition key to the "LOCK" position and remove it. The indicator light will start flashing when the key is removed from the ignition switch. (See "Engine immobiliser
  • 2002 Toyota Sienna | Owners Manual - Page 37
    0107) Fuel tank cap The alarm will activate again under the same circumstances described in "Activating the system". Stopping the alarm To stop alarm midway, do the following: If the system does not work properly, have it checked by your Toyota dealer. D Unlock either front door or back door with
  • 2002 Toyota Sienna | Owners Manual - Page 38
    door is fully opened. Otherwise, the fuel filler door may be damaged. 1. To open the fuel filler door, pull the lever up. When refueling, turn off the engine. CAUTION D Do not smoke, cause sparks or allow open flames when refueling. The fumes are flammable. D When opening the cap, do not remove
  • 2002 Toyota Sienna | Owners Manual - Page 39
    as soon as possible. The left side sliding door does not open fully if the fuel filler door is opened. Left and right side power sliding door models-The left side power sliding door does not operate when the fuel filler door is opened. CAUTION 2. To remove the fuel tank cap, turn the cap slowly
  • 2002 Toyota Sienna | Owners Manual - Page 40
    in serious accidents. D While the vehicle is moving, always keep the heads, hands and other parts of the bodies of all occupants away from the roof opening. Otherwise, they could be seriously injured if the vehicle stops suddenly or if the vehicle is involved in an accident. D Never sit on top of
  • 2002 Toyota Sienna | Owners Manual - Page 41
    Front seats ...42 Rear seats ...45 Head restraints ...61 Armrests ...62 Seat heaters ...62 Seat belts ...63 SRS driver and front passenger airbags ...74 SRS side airbags ...81 Child restraint ...87 Tilt Auto anti−glare inside rear view mirror ...117 Sun visors ...118 2002 MY SIENNA_U (OM45407U) 41
  • 2002 Toyota Sienna | Owners Manual - Page 42
    may disable the system or cause the side airbags to inflate accidentally, resulting in death or serious injury. Consult your Toyota dealer if you insist on modifications of this kind. D After adjusting the seatback, push back your body to make sure it is locked in position. 42 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 43
    (manual seat) D While adjusting the seat, do not put your hands under the seat or near the moving parts. You may catch and injure your hands or fingers. 1. SEAT POSITION ADJUSTING LEVER Hold the center of the lever and pull it up. Then slide the seat to the desired position with slight body
  • 2002 Toyota Sienna | Owners Manual - Page 44
    HEIGHT ADJUSTING SWITCH Move the control switch in the desired direction. Releasing the switch will stop the seat at that position. Do not place anything under the front seats. It the desired direction. Releasing the switch will stop the seatback at that position. 44 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 45
    to prevent personal injury in a collision or sudden stop: D When adjusting the seat, be careful not cushion. Failure to do so will prevent the seat belt from operating properly. D Third seats only: Adjust both back your body to make sure it is locked in position. 2002 MY SIENNA_U (OM45407U) 45
  • 2002 Toyota Sienna | Owners Manual - Page 46
    back to the desired angle and release the lever. -Adjusting second seats (captain seat) CAUTION To reduce the risk of sliding under the lap belt during a collision, avoid reclining the seatback any more than needed. The seat belts well back in the seats. If you are reclined, the lap belt may
  • 2002 Toyota Sienna | Owners Manual - Page 47
    desired position with slight body pressure and release the CAUTION D After putting back the seat, try pushing lever up. Then lean back to the desired angle belt during a collision, avoid reclining the seatback any more than needed. The seat belts back in the seats. If you are reclined, the lap belt
  • 2002 Toyota Sienna | Owners Manual - Page 48
    press the lever (2) behind the seatback and fold the seatback down. You can use the second seatback as a temporary table only when the vehicle is stopped. CAUTION To avoid serious injury: D Do not set up the seatback table while the vehicle is moving. D Do not sit on the folded seatback. D Make
  • 2002 Toyota Sienna | Owners Manual - Page 49
    Lift the seatback angle adjusting lever and fold the seatback down. You can use the second seatback as a temporary table only when the vehicle is stopped. CAUTION To avoid serious injury: D Do not set up the seatback table while the vehicle is moving. D Do not sit on the folded seatback. D Make
  • 2002 Toyota Sienna | Owners Manual - Page 50
    Removing second seat (bench seat) D When the second seat for a table was slid for accessing to the third seat, get the seatback up to the upright position, fold the seatback down again, and make certain all the latches Lift the seat and remove the seat toward you. Removing the second seat will
  • 2002 Toyota Sienna | Owners Manual - Page 51
    NOTICE Avoid putting heavy loads on the removed seat. The metallic tips of the seat feet pinched in the seat. D Be careful not to hit the removed seat against a person or drop it on yourself. To reinstall the seat belt from operating properly. D Do not remove the second seat or fold the seatback
  • 2002 Toyota Sienna | Owners Manual - Page 52
    Removing second seats (captain seat) 1. Pull the lever behind the seatback. Right side only-The seat will slide forward. 2. Lift the seatback angle adjusting lever and fold the seatback down. 3. Pull the seat lock release lever. Lift the seat cushion and remove the seat toward you. Removing
  • 2002 Toyota Sienna | Owners Manual - Page 53
    NOTICE Avoid putting heavy loads on the removed seat. The metallic tips of the seat feet pinched in the seat. D Be careful not to hit the removed seat against a person or drop it on yourself. To reinstall the seat belt from operating properly. D Do not remove the second seat or fold the seatback
  • 2002 Toyota Sienna | Owners Manual - Page 54
    seat to the desired position with slight body pressure and release the lever. When well back in the seats. If you are reclined, the lap belt may back to the desired angle and release the lever. When a person sits in the third seat center position, align both seatbacks at the same angle. 54 2002
  • 2002 Toyota Sienna | Owners Manual - Page 55
    . z Make sure to stow the third center seat belt in order not to cause damage on the seat belt by pinching it between the third seat inner leg and seat striker. FOLDING UP THIRD SEAT 1. Remove the head restraint. NOTICE z The third center seat belt must be stowed before you fold up the third
  • 2002 Toyota Sienna | Owners Manual - Page 56
    press the lever (2) behind the seatback and fold the seatback down. You can use the third seatback as a temporary table only when the vehicle is stopped. CAUTION To avoid serious injury: D Do not set up the seatback table while the vehicle is moving. D Do not sit on the folded seatback. D Make
  • 2002 Toyota Sienna | Owners Manual - Page 57
    feet pinched in the seat. D Be certain to replace head restraint. D Make sure the seat is securely cushion. Failure to do so will prevent the seat belt from operating properly. 4. Unlock the seat legs by to its original position, be certain to replace the head restraint. Folding the third seats
  • 2002 Toyota Sienna | Owners Manual - Page 58
    center seat belt in order not to cause damage on the seat belt by pinching it between the third seat inner leg and seat striker. REMOVING THIRD SEAT 1. Lower the head restraint to the lowest position. NOTICE z The third center seat belt must be stowed before you remove the third seat. 58 2002 MY
  • 2002 Toyota Sienna | Owners Manual - Page 59
    fold the seatback down. 4. Pull the center handle (1) up while holding up the left side lever (2) under the seat, lift the seat and remove it toward you. Removing the third seat will enlarge the luggage compartment. See "Luggage stowage precautions" in Section 2 for precautions in loading luggage
  • 2002 Toyota Sienna | Owners Manual - Page 60
    or sudden stop: D You must install the removed seat back in its original position. The right and the left are not interchangeable. If it is installed in the wrong position, the proper seat belt prevent the seat belt from operating properly. D Do not remove the second seat
  • 2002 Toyota Sienna | Owners Manual - Page 61
    is not recommended. If the seat legs are locked in the wrong position, pull up the left side lever under the seat. Then lift and remove the seat. Type A CAUTION D Adjust the center of the head restraint so that it is closest to the top of your ears. D After adjusting the
  • 2002 Toyota Sienna | Owners Manual - Page 62
    may make them feel too hot or cause burns at low temperatures (erythema, varicella). Use temperature). The key must be in the "ON" position. Pushing lightly on the opposite side will turn it off. D Persons who have insulating objects which cover the seat. NOTICE To prevent damage to the armrest,
  • 2002 Toyota Sienna | Owners Manual - Page 63
    battery from being discharged, turn the switch on when the engine belt should be worn securely and as low as possible over the hips and not on the waist. Injured person. Toyota recommends the use of a seat belt. Depending on the injury, first check with your doctor for specific recommendations. 2002
  • 2002 Toyota Sienna | Owners Manual - Page 64
    lean forward too quickly. A slow, easy motion will allow the belt to extend, and you can move around freely. D Inspect the belt system periodically. Check for cuts, fraying, and loose parts. Damaged parts should be replaced. Do not disassemble or modify the system. 64 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 65
    accident and cause serious injuries in a collision. CAUTION Seat belts with an adjustable shoulder anchor- Adjust the shoulder anchor position latching the tab and buckle. D If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt
  • 2002 Toyota Sienna | Owners Manual - Page 66
    place the Keep as low on hips as possible Adjust the position shoulder belts. of the lap and possible then adshoulder plate. Position the lap belt as low as on your hips-not on your waist, just it to a snug fit by pulling the portion upward through the latch 66 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 67
    serious injury in case of an accident or a collision. RIGHT SIDE SEAT BELT FOR SECOND BENCH SEAT The second right side seat belt is a 3−point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation. Make sure the buckle 1 is securely
  • 2002 Toyota Sienna | Owners Manual - Page 68
    the shoulder belt or lap belt may cause serious personal injury in case of a sudden braking or a collision. The second right side seat belt can be stored when it is retracted. To store the seat belt, clip the belt with the clip at the belt tab as shown in the illustration. 68 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 69
    straight and well back in the seat. To fasten your belt, insert the tab into the buckle. You will hear a click when the tab locks into the buckle. If the belt is not long enough for you, hold the tab at a right angle to the belt and pull on the tab. Remove excess length of
  • 2002 Toyota Sienna | Owners Manual - Page 70
    . Failure to follow these instructions could result in less effectiveness of the seat belt restraint system in case of vehicle accident, increasing the chance of personal injury. D Never use the seat belt extender if you can fasten the seat belt without it. 70 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 71
    to a severe frontal impact. When the airbag sensor detects the shock of a severe frontal impact, the front seat belts are quickly drawn back in by the retractors so that the belts snugly restrain the front seat occupants. The front seat belt pretensioners are activated even with no passenger in the
  • 2002 Toyota Sienna | Owners Manual - Page 72
    are operating properly. This warning light system monitors the airbag sensor assembly, front airbag sensors, side airbag sensors, front seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring and power sources. (For details, see "Service remainder indicators and warning
  • 2002 Toyota Sienna | Owners Manual - Page 73
    made on or near the front fenders, front end structure or console This front seat belt pretensioner system has a service reminder indicator to inform the driver of operating problems. If any of the following conditions occurs, this indicates a malfunction of the airbags or pretensioners. Contact
  • 2002 Toyota Sienna | Owners Manual - Page 74
    airbag sensors, front seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring and power sources. (For details, see "Service reminder indicators and warning buzzers" in Section 1−5.) D All vehicle occupants be properly restrained using the available seat belts. 74 2002
  • 2002 Toyota Sienna | Owners Manual - Page 75
    of airbag sensor detection and activation the SRS airbags and seat belt pretensioners will not operate all together. The SRS front airbag system is deploy. For the safety of all occupants, always wear your seat belts properly. Collision from the side Collision from the rear Vehicle rollover The
  • 2002 Toyota Sienna | Owners Manual - Page 76
    a second, so the airbags must inflate with considerable force. While the system is designed to reduce serious injuries, it may also cause minor burns or abrasions and swelling. Parts of the airbag module (steering wheel hub, dashboard) may be hot for several minutes, but the airbags themselves will
  • 2002 Toyota Sienna | Owners Manual - Page 77
    seat belts properly. During sudden braking just belts properly. Wearing a seat belt properly during an accident reduces the chances of death or serious injury or being thrown out of the vehicle. For instructions and precautions concerning the seat belt system, see "Seat belts" in this section. 2002
  • 2002 Toyota Sienna | Owners Manual - Page 78
    02 SIENNA_U (L/O 0107) D For instructions concerning the installation of a child restraint system, see "Child restraint" in this section. Move seat fully back D Never put a rear −facing child restraint system on the front passenger seat because the force of the rapid inflation of the front
  • 2002 Toyota Sienna | Owners Manual - Page 79
    pets on or in front of the dashboard or steering wheel pad that houses the front airbag system. They might restrict inflation or cause death restraint system in the rear seat. For instructions concerning the installation of a child restraint system, see "Child restraint" in this section. 2002 MY
  • 2002 Toyota Sienna | Owners Manual - Page 80
    fenders, front end structure, console, steering column, steering wheel or dashboard near the front passenger airbag This SRS front airbag system has a service reminder indicator to inform the driver of operating problems. If either of the following conditions occurs, this indicates a malfunction
  • 2002 Toyota Sienna | Owners Manual - Page 81
    battery cables before contacting your Toyota dealer. In the following cases, contact your Toyota dealer as soon as possible: D The SRS front airbags have been inflated. D The front part your seat belt properly. D The pad section of the steering wheel or front passenger airbag cover (shaded in
  • 2002 Toyota Sienna | Owners Manual - Page 82
    operating properly. This warning light system monitors the airbag sensor assembly, front airbag sensors, side airbag sensor, front seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring and power sources. (For details, see "Service reminder indicators and warning buzzers
  • 2002 Toyota Sienna | Owners Manual - Page 83
    produce a fairly loud noise and release some light 2. Side airbag modules (airbag and inflator) 3. Side airbag sensors 4. Airbag sensor assembly The SRS side airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and airbag sensor. 2002
  • 2002 Toyota Sienna | Owners Manual - Page 84
    any part of his/her body against the front door or the area of the seat from which the side airbag deploys even if he/she is seated in the child restraint system. It is dangerous if the side airbag inflates, and the impact could cause death or serious injury to the child. For instructions
  • 2002 Toyota Sienna | Owners Manual - Page 85
    0107) D Do not use accessories for the seats which cover the parts where the side airbags inflate. Such accessories may prevent the side airbags console or front seat D Do not modify or replace the seats or upholstery of the front seats with the side airbags. Such changes may disable the system or
  • 2002 Toyota Sienna | Owners Manual - Page 86
    SIENNA_U (L/O 0107) NOTICE Do not disconnect the battery cables before contacting your Toyota dealer. This SRS side airbag system has a service reminder indicator to inform the driver of operating problems. If either of the following conditions occurs, this indicates a malfunction of the airbags
  • 2002 Toyota Sienna | Owners Manual - Page 87
    airbag can cause death or serious injury if a rear −facing child restraint system is put on the front seat. D Make sure that you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. 2002 MY SIENNA_U (OM45407U) 87
  • 2002 Toyota Sienna | Owners Manual - Page 88
    is secured in place following the manufacturer's instructions. If it is not restrained securely, it may cause death or serious injury to the child in the event of a sudden stop or accident. When not using the child restraint system, keep it secured with the seat belt or place it somewhere other than
  • 2002 Toyota Sienna | Owners Manual - Page 89
    release button 3. Shoulder belts 4. Maximum shoulder height indicator label 5. Removable pad 6. Seat belt buckle 7. Child seat cushion 8. Seat belt buckle release button 9. Seat belt tabs 10. Owner's manual supplement 11. Seat belt adjustment lever 12. Shoulder belt clip 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 90
    the belt webbing or hardware. Take care that they do not get caught or pinched in the seatback. D Inspect the belt system periodically. Check for cuts, fraying, and loose parts. Damaged parts should be replaced. Do not disassemble or modify the child restraint belt system. 90 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 91
    to the fully down and fully backward position. 2. Lower the child seat cushion. 3. While lifting the seat belt adjustment lever in the child seat back panel, pull both shoulder belts together. CAUTION When using the built −in child restraint, the head restraint must be fully lowered and pulled
  • 2002 Toyota Sienna | Owners Manual - Page 92
    to separate the right and left shoulder belts. 5. Pull down the seatback part of the removable pad. Make sure the child's shoulders are at or below the maximum shoulder height indicator label. The removable pad is attached by Velcros. 6. Press the removable pad against the Velcros and install the
  • 2002 Toyota Sienna | Owners Manual - Page 93
    . In a sudden stop or crash, the child may go too far forward and be seriously injured. Make sure the belt clip is fastened at all times. D After inserting the tabs, make sure the tabs and buckle are locked and that the shoulder belts and buckle strap are not twisted. 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 94
    to put more than two fingers between a shoulder belt and the child's chest. After adjusting the shoulder belt tightness by lifting the seat belt adjusting lever, move the shoulder belt clip 5 to 8 cm (2 to 3 in.) below the child's chin. On each belt, the shoulder part should be centered on the child
  • 2002 Toyota Sienna | Owners Manual - Page 95
    child's age and size. (A) Infant seat (B) Convertible seat (C) Booster seat Install the child restraint system following the instructions provided by its manufacturer. Your vehicle has anchor " in this section. (A) Infant seat (C) Booster seat (B) Convertible seat 2002 MY SIENNA_U (OM45407U) 95
  • 2002 Toyota Sienna | Owners Manual - Page 96
    . D Do not put a rear−facing child restraint system on the third seat if it interferes with the lock mechanism of the second seats. This can cause death or serious injury to the child and passengers sitting in second seats in case of sudden braking or a collision. 96 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 97
    in the buckle as this may prevent you from properly latching the tab and buckle. D If the seat belt does not function normally, it cannot protect your child seat until the seat belt is fixed. 1. Run the center lap belt through or around the infant seat following the instructions provided by its
  • 2002 Toyota Sienna | Owners Manual - Page 98
    Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 3. To remove the infant seat, press the buckle−release button. (B) CONVERTIBLE SEAT INSTALLATION A convertible seat is used in forward
  • 2002 Toyota Sienna | Owners Manual - Page 99
    both seatbacks at the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries case of sudden braking or a collision. 1. Run the center lap belt through or around the convertible seat following the instructions provided by its
  • 2002 Toyota Sienna | Owners Manual - Page 100
    seatback, tighten the lap belt by pulling its free end to hold the convertible seat securely. CAUTION Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 100 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 101
    0107) -Installation with 3 −point type seat belt 3. To remove the convertible seat, press the buckle−release button. (A) INFANT SEAT INSTALLATION An infant seat is used in rear −facing position only. CAUTION D Never put a rear −facing child restraint system on the front passenger seat because
  • 2002 Toyota Sienna | Owners Manual - Page 102
    prevent you from properly latching the tab and buckle. D If the seat belt does not function D Do not put a rear−facing child restraint system on the second ( a sudden braking or a collision. 1. Run the lap and shoulder belt through or around the infant seat following the instructions provided by
  • 2002 Toyota Sienna | Owners Manual - Page 103
    ly. the infant seat firmly cushion and seatback, belt retract as far as the infant seat secure- CAUTION Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 2002 MY SIENNA_U (OM45407U) 103
  • 2002 Toyota Sienna | Owners Manual - Page 104
    02 SIENNA_U (L/O 0107) 4. To remove the infant seat, press the buckle−release button and allow the belt to retract completely. The belt will move freely again and be ready to work for an adult or older child passenger. (B) CONVERTIBLE SEAT INSTALLATION A convertible seat is used in forward− facing
  • 2002 Toyota Sienna | Owners Manual - Page 105
    to the child and passengers sitting in front (or second) seats in case of a sudden braking or a collision. 1. Run the lap and shoulder belt through or around the convertible seat following the instructions provided by its manufacturer and insert the tab into the buckle taking care not to twist the
  • 2002 Toyota Sienna | Owners Manual - Page 106
    latching the tab and buckle. D If the seat belt does belt is in the lock mode before letting the belt to retract. 3. While pressing the convertible seat firmly against the seat cushion and seatback, let the shoulder belt retract as far as it will go to hold the convertible seat securely. 106 2002
  • 2002 Toyota Sienna | Owners Manual - Page 107
    in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 4. To remove the convertible seat, press the buckle−release button and allow the belt to retract completely. The belt will move freely again and be ready to work for an adult or
  • 2002 Toyota Sienna | Owners Manual - Page 108
    injury to the child. D On vehicles with side airbags, do Move seat fully back not allow the child to lean against the front door or around the front door even if the child is seated in the child restraint system. It is dangerous if the side airbag inflates, and the impact could cause death
  • 2002 Toyota Sienna | Owners Manual - Page 109
    the D After inserting the tab, make sure the tab and buckle are locked and that the lap and shoulder portions of the belt are not twisted. D Do not insert coins, clips, etc. in the buckle as this may prevent your child from properly latching the tab and buckle. 2002 MY SIENNA_U (OM45407U) 109
  • 2002 Toyota Sienna | Owners Manual - Page 110
    -Using a top strap Follow the procedure below for a child restraint system that requires the use of a top strap. Anchor brackets Second seat left side second seat. Third seat: Use the anchor brackets on the back of the third seat cushion to attach the top strap. Anchor brackets are installed for each
  • 2002 Toyota Sienna | Owners Manual - Page 111
    strap is securely latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. TO USE THE ANCHOR BRACKET: 1. Remove the head restraint. Third seat 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 112
    Replace the head restraint. Second bench seat without built−in child restraint system (left side only) Third seat (right side only) The lower anchorages for the child restraint system seat as shown in the illustration. Child restraint system interfaced with the FMVSS225 specification can be fixed
  • 2002 Toyota Sienna | Owners Manual - Page 113
    in the seat cushion. 2. Latch the buckles onto the anchorages. If your child restraint system has a top strap, it should be anchored. (For the installation of the top strap, see "-Using a top strap" in this section.) For the installation details, refer to the instruction manual equipped with each
  • 2002 Toyota Sienna | Owners Manual - Page 114
    system in different directions to be sure it is secure. Follow all the installation instructions system on the second seat or third seat if it interferes with the lock mechanism of the front seat or second seat. This can cause severe injury to the child and front passenger in case of sudden braking
  • 2002 Toyota Sienna | Owners Manual - Page 115
    switch-To move the mirror Push the switch in the desired direction. Mirror can be adjusted when key is in the "ACC" or "ON" position. 2002 MY SIENNA_U (OM45407U) 115
  • 2002 Toyota Sienna | Owners Manual - Page 116
    not drive with the mirrors folded backward. Both the driver and passenger side rear view mirrors must be extended and properly adjusted before driving. 116 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 117
    light. To turn off the automatic function, push the "MIRROR" switch. To turn on the automatic function again, push the "MIRROR" switch. Adjust it before driving so that the rear view is in the best condition. When the inside air in death or serious injuries. 2002 MY SIENNA_U (OM45407U) 117
  • 2002 Toyota Sienna | Owners Manual - Page 118
    down the sun visor, remove it from the hook cover. On some models, the vanity light comes on when you open the cover. VANITY LIGHTS CUT OFF OPERATION When the ignition switch is "OFF" and vanity light in the vehicle stays lighting on, the light will cut off automatically after 30 minutes. 118 2002
  • 2002 Toyota Sienna | Owners Manual - Page 119
    the cut off operation by: D Turning the key to the "ACC" position. D Opening or closing any of front and sliding doors. D Turning off all the "ON" lights. All the lights are cut off when all the doors are locked by key or wireless remote control transmitter. The key must be in the "OFF" position
  • 2002 Toyota Sienna | Owners Manual - Page 120
    02 SIENNA_U (L/O 0107) 120 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 121
    ...125 Front fog lights ...126 Personal lights ...126 Interior light ...128 Ignition switch light ...129 Luggage compartment light ...130 Windshield wipers and washer ...131 Rear window wiper and washer ...131 Rear window and outside rear view mirror defoggers ...132 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 122
    . NOTICE To prevent the battery from being discharged, do not leave the lights on for a long period when the engine is not running. Daytime running light system The headlights turn on at reduced intensity when the parking brake is released with the engine started, even with the light switch in the
  • 2002 Toyota Sienna | Owners Manual - Page 123
    Pull the lever toward you (position 2) for low beams. The headlight high beam indicator light (blue light) on the instrument panel will tell you that the high beams are on. Flashing the high (position 3)-Pull the back. The high beam when you release the beam headlights lever all the way headlights
  • 2002 Toyota Sienna | Owners Manual - Page 124
    ) NOTICE To prevent the battery from being discharged, do not leave the lights on for a long period when the engine is not running. Daytime running light system The headlights turn on at reduced intensity when the parking brake is released with the engine started, even with the light switch in the
  • 2002 Toyota Sienna | Owners Manual - Page 125
    the battery from being discharged, do not leave the switch on longer than necessary when the engine is not running. Instrument panel light control your vehicle must be stopped where it might be a traffic hazard. Always pull as far off the road as possible. The turn signal light switch will not
  • 2002 Toyota Sienna | Owners Manual - Page 126
    . To turn the light off, push the lens once again. To turn on the front personal lights, push the switch. The front personal light switch has the following positions: "OFF"-Turns the light off. "DOOR"-Turns the light on when either front or sliding door is opened. 126 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 127
    when the light is still on. D One door will be closed with the lock knob pushed forward (front door) or downward (sliding door) while the other doors are locked. When the driver's door is unlocked with a key, the light comes on for 15 seconds, even if the doors are not opened. 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 128
    or sliding door is opened. Rear To turn on the rear interior light, slide the switch. The rear interior light switch has the following positions: "ON"-Keeps the light on all the time. "OFF"-Turns the light off. "DOOR"-Turns the light on when either sliding or back door is opened. 128 2002 MY
  • 2002 Toyota Sienna | Owners Manual - Page 129
    02 SIENNA_U (L/O 0107) Ignition switch light ILLUMINATED ENTRY SYSTEM (with power door lock system) Front and center- With the switch in the "DOOR" position, the light comes on when either front or sliding doors are opened. After all the doors are closed, the light remains on for about 15 seconds
  • 2002 Toyota Sienna | Owners Manual - Page 130
    when all the doors are locked by the key or wireless remote control transmitter. The key must be in the "OFF" position. To turn the luggage compartment light on, open the back door and push the switch downwards. To turn it off, push the switch upwards or close the back door. 130 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 131
    squirt washer fluid on the rear window, twist the knob upward or downward as far as it will go (position 3 or 4). The knob automatically returns from these positions after you release it. For instructions on adding washer fluid, see "Adding washer fluid" in Section 7 −3. 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 132
    . An indicator light will illuminate to indicate the defogger is operating. On some models, heater panels in the outside rear view mirrors will also quickly clear the surfaces. Push the switch once again to turn the defoggers off. With manual air conditioning controls The system will automatically
  • 2002 Toyota Sienna | Owners Manual - Page 133
    the surfaces are clear. Leaving the defoggers on for a long time could cause the battery to discharge, especially during stop−and−go driving. The defoggers are not designed for drying rain water or for melting to scratch or damage the heater wires or connectors. 2002 MY SIENNA_U (OM45407U) 133
  • 2002 Toyota Sienna | Owners Manual - Page 134
    02 SIENNA_U (L/O 0107) 134 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 135
    SECTION 1− 5 136 136 137 138 138 OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ...Engine coolant temperature gauge ...Tachometer ...Odometer and two trip meters ...Service reminder indicators and warning buzzers ... 2002 MY SIENNA_U (OM45407U) 135
  • 2002 Toyota Sienna | Owners Manual - Page 136
    which remains at the last indicated position when the ignition switch is turned off. With tachometer Engine coolant temperature gauge If the fuel level approaches "E" or the low fuel level warning light comes on, fill the fuel tank as soon as possible. On inclines or curves, due to the movement of
  • 2002 Toyota Sienna | Owners Manual - Page 137
    economy. Remember, in most cases the slower the engine speed, the greater the fuel economy. D Driving up a long hill on a hot day. D Reducing speed or stopping after high speed driving. D Idling for a long period with the air conditioning on in stop−and−go traffic. D Towing a trailer. NOTICE Do
  • 2002 Toyota Sienna | Owners Manual - Page 138
    calculate the fuel economy and the trip meter B, then back to the odometer each stop immediately and contact Toyota dealer. (b) Fasten driver's seat belt. (indicator and buzzer) Do this. If parking brake is With tachometer (c) Fasten front passenger's seat belt. (d) Stop and check. 138 2002
  • 2002 Toyota Sienna | Owners Manual - Page 139
    vehicle to Toyota dealer. If brake system warning light is also on, stop immediately and contact Toyota dealer. Take vehicle to Toyota dealer. (m) Add washer fluid. (n) (i) Close all doors. (o) Key reminder buzzer Adjust tire pressure. Stop and check. Remove key. (j) Close the power sliding
  • 2002 Toyota Sienna | Owners Manual - Page 140
    on its weight and how it is placed on the seat, built −in sensors in the seat cushion may detect the pressure, causing the reminder light to come on. D The brake system warning light remains on together with the "ABS" warning light. In this case, not only the anti−lock brake system will fail
  • 2002 Toyota Sienna | Owners Manual - Page 141
    (d) Discharge Warning Light This light warns that the battery is being discharged. If it comes on while you are driving, there is a problem somewhere in the charging system. The engine ignition will continue to operate, however, until the battery is discharged. Turn off the air conditioning, blower
  • 2002 Toyota Sienna | Owners Manual - Page 142
    braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. (i) Open Door Warning Light This light
  • 2002 Toyota Sienna | Owners Manual - Page 143
    conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. (l) Vehicle Skid Control System/Traction Control System Warning Light This light warns that there is a problem
  • 2002 Toyota Sienna | Owners Manual - Page 144
    (L/O 0107) CHECKING SERVICE REMINDER INDICATORS (except the low fuel level warning light and low windshield washer fluid level warning light) 1. Apply the parking brake. 2. Open one of the doors. The open door warning light should come on. 3. Close the door. The open door warning light should go
  • 2002 Toyota Sienna | Owners Manual - Page 145
    OF INSTRUMENTS AND CONTROLS Ignition switch, Transmission and Parking brake Ignition switch with steering lock ...Automatic transmission ...Traction control system ...Vehicle skid control system ...Tire pressure warning system ...Parking brake ...Cruise control ... 2002 MY SIENNA_U (OM45407U) 145
  • 2002 Toyota Sienna | Owners Manual - Page 146
    on. This is the normal driving position. "ACC"-Accessories such as the radio operate, but the engine is off. If you leave the key in the "ACC" or "LOCK" position and open the driver's door, a buzzer will remind you to remove the key. "LOCK"-Engine is off and the steering wheel is locked. The
  • 2002 Toyota Sienna | Owners Manual - Page 147
    transmission Your automatic transmission has a shift lock system to minimize the possibility of incorrect operation. This means you can only shift out of "P" position when the brake cluster. P: Parking, engine starting and key removal R: Reverse N: Neutral With the brake pedal depressed, shift while
  • 2002 Toyota Sienna | Owners Manual - Page 148
    conditions such as normal cruising, hill climbing, hard towing, etc. Always turn the overdrive on for better fuel economy and quieter driving. If the engine coolant temperature is low, the transmission will not shift into overdrive gear even with the overdrive on. 3. Release the parking brake
  • 2002 Toyota Sienna | Owners Manual - Page 149
    in the "2" or "L" position. This may cause severe automatic transmission damage from overheating. To prevent such damage, "D" position should be used in hill climbing or hard towing. (f) Backing up 1. Bring the vehicle to a complete stop. 2. With the brake pedal held down with your foot, shift the
  • 2002 Toyota Sienna | Owners Manual - Page 150
    Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. (i) Rocking your vehicle if stuck NOTICE If you rock your vehicle, observe the following precautions to prevent damage to the transmission and other parts. z Do not depress the
  • 2002 Toyota Sienna | Owners Manual - Page 151
    is operating, the following conditions occur: D The system controls the spinning of the front wheels. At this time, the slip indicator light blinks. D You may feel vibration or noise in your vehicle, caused by operation of the brakes. This indicates the system is functioning properly. The slip
  • 2002 Toyota Sienna | Owners Manual - Page 152
    skid control system. The light will come on when the ignition key is turned to "ON" and will go off after a few seconds. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving. 152 2002 MY
  • 2002 Toyota Sienna | Owners Manual - Page 153
    mph). You may hear a sound in the engine compartment for a few seconds when the engine is started or just after the vehicle is started. This means that the system is in the self −check mode but does not indicate a malfunction. CAUTION D The warning light does not come on after the ignition key is
  • 2002 Toyota Sienna | Owners Manual - Page 154
    control system. The light will come on when the ignition key is turned to "ON" and will go off after a few seconds. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving. 154 2002 MY
  • 2002 Toyota Sienna | Owners Manual - Page 155
    may hamper driving. This system is not designed to operate when the vehicle is stopped. Therefore, check the tire pressures regularly. The recommended cold tire pressures, tire size and the vehicle capacity weight are on the tire pressure label. (For instruction, see "Checking tire pressure" in
  • 2002 Toyota Sienna | Owners Manual - Page 156
    rotating tires or wheels memories the present tire condition as a standard. After replacing or rotating the tires or wheels, perform the initial adjustment as follows. 1. Park the vehicle at a safe place and apply the parking brake. Stop the engine. 2. Adjust pressures of all the installed tires to
  • 2002 Toyota Sienna | Owners Manual - Page 157
    speed. Another press will turn the system completely off. D Avoid vehicle speed increases when driving downhill. If the vehicle speed is too fast in relation to the cruise control set speed, cancel the cruise control then downshift the transmission to use engine braking to slow down. CAUTION To
  • 2002 Toyota Sienna | Owners Manual - Page 158
    it. b. Depressing the brake pedal. SETTING AT A DESIRED SPEED The transmission must be in "D" before for the above cases, have your vehicle checked by your Toyota dealer at the earliest overdrive switch, with the cruise control on, engine braking will not be applied because the cruise control
  • 2002 Toyota Sienna | Owners Manual - Page 159
    cancelled by pulling the control lever or by depressing the brake pedal or clutch pedal, pushing the lever up in the "RES/ACC conditions then occurs, there is some trouble in the cruise control system. D The indicator light does not come on. D The indicator light flashes again. D The indicator light
  • 2002 Toyota Sienna | Owners Manual - Page 160
    02 SIENNA_U (L/O 0107) 160 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 161
    02 SIENNA_U (L/O 0107) SECTION Car audio system 1− 7 162 163 180 182 OPERATION OF INSTRUMENTS AND CONTROLS Reference ...Using your audio system ...Audio remote controls ...Car audio system operating hints ... 2002 MY SIENNA_U (OM45407U) 161
  • 2002 Toyota Sienna | Owners Manual - Page 162
    ETR radio/cassette player/compact disc player (with compact disc auto changer controller) Type 2: AM·FM ETR radio/cassette player/ compact disc auto changer 162 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 163
    audio system was previously off, then the entire audio system will the system is already on but you want system's tone and balance controls, see the description of your own system -To remove an antenna, carefully make sure it is removed before driving your Toyota Do not oil any part of the player and
  • 2002 Toyota Sienna | Owners Manual - Page 164
    disc will be played from track 1. The "LOAD" button must be pressed to insert a disc. (See "LOAD" button.) NOTICE Never try to disassemble or oil any part of the compact disc player. Do not insert anything except a compact disc into the slot. The player is intended for use with 12 cm (4.7 in
  • 2002 Toyota Sienna | Owners Manual - Page 165
    02 SIENNA_U (L/O 0107) -Controls and features "Type 1−1 Details of specific buttons, controls, and features are described in the alphabetical listing that follows. 2002 MY SIENNA_U (OM45407U) 165
  • 2002 Toyota Sienna | Owners Manual - Page 166
    02 SIENNA_U (L/O 0107) "Type 1−2 Details of specific buttons, controls, and features are described in the alphabetical listing that follows. 166 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 167
    appear on the display. These systems can store one AM and stop and then play that same side. If a tape fast forwards completely, the cassette player will play the other side of the tape, using the auto−reverse feature. 2002 Manual tone adjustment function- This knob is used to adjust the tone manually
  • 2002 Toyota Sienna | Owners Manual - Page 168
    BAL−R7". AUDIO (Audio control and mode adjustment) Type 1−2 Manual tone adjustment function- This knob is used to adjust the tone manually. For low−pitch tone adjustment, push "AUDIO" repeatedly until time you push "CD", the system changes to the automatic changer. 168 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 169
    system will display one of the six following error messages. If "WAIT" appears on the display, it indicates that the inside of the player unit may be too hot due to the very high ambient temperature. Remove is a trouble inside the system. Eject Dolbyr B Noise Reduction, 2002 MY SIENNA_U (OM45407U) 169
  • 2002 Toyota Sienna | Owners Manual - Page 170
    the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the top track of the disc and replay. This process will be continued until you push the seconds, and then scan again. To select a station, push "SCAN" again. 170 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 171
    . If the player scanned all the tracks on the disc, it will stop scanning. Compact disc auto changer only- Scanning the first track of all of channel separation to prevent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches 2002 MY SIENNA_U (OM45407U) 171
  • 2002 Toyota Sienna | Owners Manual - Page 172
    TAPE Push "TAPE" to switch from radio or compact disc operation to cassette operation. If the audio system is off, you can turn on the cassette player by pushing "TAPE". In both cases, a cassette frequency. Turn the knob counterclockwise to step down the frequency. 172 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 173
    02 SIENNA_U (L/O 0107) "Type 2 Details of specific buttons, controls, and features are described in the alphabetical listing that follows. 2002 MY SIENNA_U (OM45407U) 173
  • 2002 Toyota Sienna | Owners Manual - Page 174
    number and station frequency will appear on the display. These systems can store one AM and two FM stations for each button stop and then play that same side. If a tape fast forwards completely, the cassette player will play the other side of the tape, using the auto−reverse feature. 174 2002
  • 2002 Toyota Sienna | Owners Manual - Page 175
    Manual tone adjustment function- This knob is used to adjust the tone manually to "BAL−R7". 2002 MY SIENNA_U (OM45407U) CD (Compact Disc) with the player malfunctions, your audio system will display one of the six to the very high ambient temperature. Remove the disc or magazine from the player
  • 2002 Toyota Sienna | Owners Manual - Page 176
    a trouble inside the system. Eject long (if the audio system is on at this the indicators will stop flashing. If no recorded with Dolbyr B Noise Reduction, push the button NR mode reduces tape noise by about 10 dB noise system allows you to set twelve FM stations, two for each button. If the audio system
  • 2002 Toyota Sienna | Owners Manual - Page 177
    will close and the indicators will stop flashing. After a few seconds, the Push "PWR·VOL" to turn the audio system on and off. Turn "PWR·VOL" to the repeat feature to work correctly. 2002 MY SIENNA_U (OM45407U) Compact Disc Player ends, the player will automatically go back to the top track of the
  • 2002 Toyota Sienna | Owners Manual - Page 178
    . To select a track, push "SCAN" again. If the player scanned all the tracks on the disc, it will stop scanning. Scanning the first track of all the discs in the magazine: Push "SCAN" until you hear a beep. · side of the button until "REW 3" appears on the display. 178 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 179
    "TAPE" to switch from radio or compact disc operation to cassette operation. If the audio system is off, you can turn on the cassette player by pushing "TAPE". In both cases, the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono
  • 2002 Toyota Sienna | Owners Manual - Page 180
    ) Audio remote controls Some parts of the audio system can be adjusted with the buttons on the steering wheel. Details of the specific buttons, controls, and features are described below. 1. " Ɯ" and "VOL Ɲ" Buttons 2. "MODE" Button 3. "no" Button 4. "MUTE" Button 180 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 181
    cancelled by doing the following: D Push "MUTE" once again. D Push "Ɯ" or "VOL Ɲ". D Operate any of the buttons or knobs on the audio system itself. D When the tape reaches to the beginning, the player will automatically start playing that side. D Disconnect the electrical power source. D After
  • 2002 Toyota Sienna | Owners Manual - Page 182
    noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio-it is just the normal result of conditions alternately noise other parts
  • 2002 Toyota Sienna | Owners Manual - Page 183
    ) and personal computer use CD−ROMs may not be playable on your compact disc player. for use with 12 cm (4.7 in.) discs only. D Your compact disc player is intended D Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the
  • 2002 Toyota Sienna | Owners Manual - Page 184
    to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the compact disc player when you are not listening to them. Store them in their plastic cases Do not use a conventional record cleaner or anti −static device. 184 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 185
    tips ...Front automatic air conditioning system Controls ...Air flow selector settings ...Operating tips ...Side vents ...Rear manual air conditioning system Controls ...Air flow selector settings ...Rear automatic air conditioning system Controls ...Roof vents ... 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 186
    02 SIENNA_U (L/O 0107) Front manual air conditioning system- -Controls 1. Temperature selector 2. Air intake selector 3. Air flow selector 4. "A/C" button 5. Fan speed selector 186 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 187
    the air intake air Air flows mainly from the windshield vents. Turning the air air air air flow selector settings, see the illustration after "A/C" button. Air flow selector Turn the knob to select the vents used for air flow. 1. Panel-Air flows mainly instrument panel vents. from the 2. Bi −level-Air
  • 2002 Toyota Sienna | Owners Manual - Page 188
    on. To turn the air conditioning off, press the button again. If the "A/C" button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your vehicle to a Toyota dealer for service. 188 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 189
    minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly. D Make sure the air intake grilles in front of the area under the front seats clear to allow air to circulate throughout the vehicle. D On cold air intake selector be set to FRESH and the fan speed selector
  • 2002 Toyota Sienna | Owners Manual - Page 190
    WARM (red zone) Air intake-FRESH (outside air) Air flow-FLOOR Air conditioning-OFF Air conditioning For best results, set controls to: Fan speed-Any setting except "OFF" Temperature-Towards COLD (blue zone) Air intake-FRESH (outside air) Air flow-PANEL Air conditioning-ON Defogging The inside
  • 2002 Toyota Sienna | Owners Manual - Page 191
    red zone) Air intake-FRESH (outside air) Air flow-WINDSHIELD Turning the air flow selector When turning the air flow selector to windshield or floor/windshield position, the air intake selects to return the setting to RECIRCULATE mode, press the air intake selector button once again. Press the "A/C"
  • 2002 Toyota Sienna | Owners Manual - Page 192
    02 SIENNA_U (L/O 0107) Front automatic air conditioning system- -Controls 1. "A/C" button 2. "MODE" button (air flow selector) 3. Fan speed selector 4. Windshield air flow button 5. Temperature selector 6. Air intake selector 7. "AUTO" button 8. "OFF" button 192 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 193
    the "AUTO" button. An indicator light will illuminate to show that the automatic operation mode has been selected. In the automatic operation mode, the air conditioning selects the most suitable fan speed, air flow, air intake and on−off of the air conditioning according to the temperature. When you
  • 2002 Toyota Sienna | Owners Manual - Page 194
    on. To turn the air conditioning off, press the button again. If the "A/C" button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your vehicle to a Toyota dealer for service. Windshield air flow button When
  • 2002 Toyota Sienna | Owners Manual - Page 195
    minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly. D Make sure the air intake grilles in front of the area under the front seats clear to allow air to circulate throughout the vehicle. D On cold air intake selector be set to FRESH and the fan speed selector
  • 2002 Toyota Sienna | Owners Manual - Page 196
    . Temperature-To the desired temperature Air intake-FRESH (outside air) Air conditioning-ON For manual operation- Fan speed-To the desired fan speed Temperature-Towards low temperature (to the left) Air intake-FRESH (outside air) Air flow-PANEL Air conditioning-ON 196 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 197
    left) to cool Air intake-FRESH (outside air) Air flow-WINDSHIELD For manual operation- Fan speed air flow. If the windshield is frosting, manually turn on the defroster. When pressing the windshield air flow button, the air humid days, do not blow cold air on the windshield-the difference between the
  • 2002 Toyota Sienna | Owners Manual - Page 198
    02 SIENNA_U (L/O 0107) Side vents If air flow control is not satisfactory, check the side vents. The side vents may be opened or closed as shown. Driver's side Passenger's side 198 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 199
    02 SIENNA_U (L/O 0107) Rear manual air conditioning system- -Controls 1. Fan speed selector (front) 2. Fan speed selector (rear) 3. Temperature selector 4. Air flow selector 2002 MY SIENNA_U (OM45407U) 199
  • 2002 Toyota Sienna | Owners Manual - Page 200
    turns off the rear air conditioning system and the system cannot be operated by air temperature. It is only for blowing air conditioned cool air. 2. Except "A/C"-Air flows only from the floor vents. This controls the air temperature. It is for blowing air conditioned cool air and warm air. 200 2002
  • 2002 Toyota Sienna | Owners Manual - Page 201
    02 SIENNA_U (L/O 0107) Rear automatic air conditioning system- -Controls 1. Fan position selector 2. Fan speed selector 3. Temperature selector 2002 MY SIENNA_U (OM45407U) 201
  • 2002 Toyota Sienna | Owners Manual - Page 202
    of the front and rear air conditioning systems simultaneously by using the front air conditioning switches. Fan speed selector manual modes are on. The floor vents provide only cool air. The roof panel vents provide warm air and cool air. Open Close If air flow control is not satisfactory, check
  • 2002 Toyota Sienna | Owners Manual - Page 203
    AND CONTROLS Clock ...204 Outside temperature gauge ...204 Cigarette lighter and ashtrays ...204 Power outlets ...205 Glove box ...206 Garage door opener ...206 Garage door opener box ...209 Compass ...213 Auxiliary boxes ...217 Cup holder ...219 Bottle holders ...219 Juice box holder ...220 First
  • 2002 Toyota Sienna | Owners Manual - Page 204
    off the display. When the air conditioning system is on, pushing the button once indicates the outside temperature and a second time changes the display back to the air conditioning temperature. Cigarette lighter and front ashtray Rear ashtray (for second seats) 204 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 205
    , push it back in completely. To remove the ashtray, engine is not running, the key must be in the "ACC" position. Do not hold the cigarette lighter pressed in. Use a Toyota genuine cigarette lighter or equivalent for replacement. To reduce the chance of injury in case of an accident or sudden stop
  • 2002 Toyota Sienna | Owners Manual - Page 206
    a sudden stop, always keep the glove box door closed while driving. The garage door opener (HomeLinkR Universal Transceiver) is manufactured under license from HomeLinkR and can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, etc
  • 2002 Toyota Sienna | Owners Manual - Page 207
    a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, identify if your garage transmitter is of the "Rolling Code" type. Press and hold the programmed HomeLinkR button. The garage door has the rolling code feature if the indicator light (on the
  • 2002 Toyota Sienna | Owners Manual - Page 208
    programmed button. Check to see if the gate/device operates correctly. 7. Repeat steps 1 through 6 for each remaining HomeLinkR button to program another device. Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized
  • 2002 Toyota Sienna | Owners Manual - Page 209
    the door to stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features increases risk of serious injury or death. The box is designed to store a garage door opener transmitter. Open the cover and remove the Velcro loop. 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 210
    02 SIENNA_U (L/O 0107) Remove the paper strip covering the adhesive on back side of loop and adhere loop to back side of the transmitter near center. Please note if transmitter has wire clip for sun visor, this clip must be removed prior to adhesion of the Velcro. Place the transmitter with
  • 2002 Toyota Sienna | Owners Manual - Page 211
    transmitter button when the cover is closed. Close the cover. When the garage door opener transmitter is properly installed, you can operate the transmitter by pushing the center panel of the cover. If the center panel does not contact your garage door opener transmitter: D Check to see if spacer
  • 2002 Toyota Sienna | Owners Manual - Page 212
    an accident or a sudden stop, always keep the garage door opener box closed while driving. D Keep the remaining spacers away from children. The auxiliary box and garage door opener box (stored in the glove box) are interchangeable. Removing the cover- Half open the cover. Pinch each hinge and pull
  • 2002 Toyota Sienna | Owners Manual - Page 213
    with the system on, the system will automatically turn back on when the ignition switch near the inside rear view mirror.) D The battery has been disconnected. Your vehicle is out of conditions: D The vehicle is stopped immediately after turning. The compass does not adjust while the vehicle is stopped
  • 2002 Toyota Sienna | Owners Manual - Page 214
    vehicle. To adjust this deviation, stop the vehicle, then push and hold the "COMP" switch until the zone number appears on the display. Then push the "COMP" switch, referring to the following map to select the number of the zone where the vehicle is. The compass sensor is in the inside rear
  • 2002 Toyota Sienna | Owners Manual - Page 215
    : Samoa: Guam: Saipan: 5 6 8 8 After calibration, leaving the system for several seconds returns it to the compass mode. CAUTION Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped. Zone number 2002 MY SIENNA_U (OM45407U) 215
  • 2002 Toyota Sienna | Owners Manual - Page 216
    then always perform circling calibration after the battery has been removed, replaced or disconnected. D Do not perform "COMP" switch again. D During calibration, do not operate electric systems (moon roof, power windows, etc.) as they may interfere with stopped. 216 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 217
    moon roof) To use the box, open it as shown above. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the auxiliary box closed while driving. Type B (without moon roof
  • 2002 Toyota Sienna | Owners Manual - Page 218
    Instrument panel -Front console -Rear lateral in case of an accident or a sudden stop, always keep the auxiliary box closed while driving. To reduce the chance stop, always keep the auxiliary box closed while driving. CAUTION To reduce the chance of injury in case of an accident or a sudden stop
  • 2002 Toyota Sienna | Owners Manual - Page 219
    in the compartment and possibly injure people in the vehicle during sudden braking or in an accident. case of an accident or sudden stop while driving, keep the cup holder closed when it is not in injure people in the vehicle during a sudden braking or an accident. 2002 MY SIENNA_U (OM45407U) 219
  • 2002 Toyota Sienna | Owners Manual - Page 220
    sliding door models) D Do not place anything else other than juice box on the juice box holder, as such items may be thrown about in the compartment and possibly injure people in the vehicle during sudden braking or box, push down the lever and pull the lid. 220 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 221
    warning reflector. To use the belt, do the following. 1. To loosen the belt, pull the buckle rearward. 2. To tighten the belt, pull the belt forward. Make sure the first −aid kit and warning reflector are securely held. Use a floor mat of the correct size. If the floor carpet and floor hole, then
  • 2002 Toyota Sienna | Owners Manual - Page 222
    02 SIENNA_U (L/O 0107) 222 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 223
    ) SECTION Break −in period ...Fuel ...Fuel pump shut off system ...Operation in foreign countries ...Three −way catalytic converter ...Engine exhaust cautions ...Facts about engine oil consumption ...Iridium−tipped spark plugs ...Brake system ...Brake pad wear limit indicators ...Luggage stowage
  • 2002 Toyota Sienna | Owners Manual - Page 224
    hard stops during the first 300 km (200 miles). D Do not drive for a long time at any single speed, either fast or slow. NOTICE Do not use leaded gasoline. Use of leaded gasoline will cause the three− way catalytic converter to lose its effectiveness and the emission control system to function
  • 2002 Toyota Sienna | Owners Manual - Page 225
    on California cleaner burning gasoline (CBG) that contains lower sulfur. If you cannot use California CBG, your emission control system may suffer damage and turn on the Malfunction Indicator Lamp. If the malfunction is caused by the type of fuel used, repairs may not be covered by your warranty
  • 2002 Toyota Sienna | Owners Manual - Page 226
    driveability, try changing gasoline brands. If this does not rectify your problem, then consult your Toyota dealer. The fuel pump shut off system stops supplying fuel to the engine to minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision. To restart the
  • 2002 Toyota Sienna | Owners Manual - Page 227
    . Malfunctions in the engine electrical system, electronic ignition system/distributor ignition system or fuel system could cause an extremely high three−way catalytic converter temperature. z If the engine becomes difficult to start or stalls frequently, take your vehicle in for a check−up as soon
  • 2002 Toyota Sienna | Owners Manual - Page 228
    in the sound of the exhaust, have the system checked immediately. D If you smell exhaust fumes in the vehicle, drive with the windows open and the back door and quarter windows closed. Have the cause immediately located and corrected. D Oil is used to lubricate pistons, piston rings and cylinders
  • 2002 Toyota Sienna | Owners Manual - Page 229
    time you refuel the vehicle. NOTICE Failure to check the oil level regularly could lead to serious engine trouble due to insufficient oil. For detailed information on oil level check, see "Checking the engine oil level" in Section 7−2. Your engine is fitted with iridium−tipped spark plugs. NOTICE
  • 2002 Toyota Sienna | Owners Manual - Page 230
    the other will still work. However, the pedal will be harder to press, and your stopping distance will be longer. Also, the brake system warning light may come on. CAUTION D Do not pump the brake pedal if the engine stalls. Each push on the pedal uses up your reserved vacuum. D Even if the power
  • 2002 Toyota Sienna | Owners Manual - Page 231
    rough, gravel or snow− covered roads. D You may hear the anti−lock brake system operating and feel the brake pedal pulsating and the vibrations of the vehicle body and steering wheel. You may also hear the motor sound in the engine compartment even after the vehicle is stopped. D Driving with tire
  • 2002 Toyota Sienna | Owners Manual - Page 232
    up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. D The light does not come
  • 2002 Toyota Sienna | Owners Manual - Page 233
    of this system's warning light, see "Service reminder indicators and warning buzzers" in Section 1 −5. The brake pad wear limit indicators on your disc brakes give a warning noise when the brake pads are worn to where replacement is required. If you hear a squealing or scraping noise while driving
  • 2002 Toyota Sienna | Owners Manual - Page 234
    weight is Dimensions and weight braking. D If driving for a long distance, on rough roads, or at high speeds, stop instructions and precautions when installing the attachments or their equivalent. D Do not exceed 50 kg (110 lb.) cargo weight on the roof rails. However, if the allowable cargo weight
  • 2002 Toyota Sienna | Owners Manual - Page 235
    number for your Toyota. It is used in registering the ownership of your vehicle. The vehicle identification number (VIN) is also on the Certification Label. 2002 MY SIENNA_U (OM45407U) 235
  • 2002 Toyota Sienna | Owners Manual - Page 236
    and recovery of parts from stolen vehicles. The label is designed so that once it is applied to a surface, any attempt to remove it will result in loss of control. NOTICE The engine number is stamped on the engine block as shown. You should not attempt to remove the theft prevention labels as it
  • 2002 Toyota Sienna | Owners Manual - Page 237
    covered or icy roads, we recommend using snow tires. If installing snow tires, be sure to replace all four tires. 2. All season tires All season tires are designed to provide better traction in snow and to be adequate for driving in most winter conditions and wheels. 2002 MY SIENNA_U (OM45407U) 237
  • 2002 Toyota Sienna | Owners Manual - Page 238
    02 SIENNA_U (L/O 0107) 238 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 239
    STARTING AND DRIVING 3 Before starting the engine ...240 How to start the engine ...240 Tips for driving in various conditions ...241 Winter driving tips ...242 Dinghy towing ...243 Trailer towing ...243 How to save fuel and make your vehicle last longer ...249 2002 MY SIENNA_U (OM45407U) 239
  • 2002 Toyota Sienna | Owners Manual - Page 240
    wheel angle. 3. Adjust the inside and outside rear view mirrors. 4. Lock all doors. 5. Fasten seat belts. How to start the engine- (a) Before cranking 1. Apply the parking brake firmly. 2. Turn off unnecessary lights and accessories. 3. Put the selector lever in "P". If you need to restart the
  • 2002 Toyota Sienna | Owners Manual - Page 241
    and the parking brake reminder light is off. D Do not leave your vehicle unattended while the engine is running. D When parking on a hill, turn the front wheels until they touch the curb so that the vehicle will not roll. Apply the parking brake, and place the transmission in "P". If necessary
  • 2002 Toyota Sienna | Owners Manual - Page 242
    7−3 tells you how to visually inspect the battery. Your Toyota dealer and most service stations will be pleased to check the level of charge. D Do not continue normal driving when the brakes are wet. If they are wet, your vehicle will require a longer stopping distance, and it may pull to one side
  • 2002 Toyota Sienna | Owners Manual - Page 243
    in and around the parking brake mechanism may freeze, making it hard to release. Keep ice and snow from accumulating under the fenders. Ice and snow built up under your fenders can make steering difficult. During bad winter driving, stop and check under the fenders occasionally. Depending
  • 2002 Toyota Sienna | Owners Manual - Page 244
    includes the weight of any special equipment installed on your vehicle. D The load on either the front or rear axle resulting from distribution of the gross vehicle weight on both axles must not exceed the Gross Axle Weight Rating (GAWR) listed on the Certification Label. 2002 MY SIENNA_U (OM45407U
  • 2002 Toyota Sienna | Owners Manual - Page 245
    to the vehicle frame and installed according to the hitch manufacturer's instructions. recommends trailers with brakes that conform to any applicable federal and state/provincial regulations. D The hitch ball and king pin should have a light coat of grease. 2002 MY SIENNA_U (OM45407U) 245
  • 2002 Toyota Sienna | Owners Manual - Page 246
    refer to the scheduled maintenance information in the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". CAUTION D If the total trailer weight exceeds 453 kg (1000 lb.), trailer brakes are required. D Trailer lights must comply with federal, state/provincial and local regulations. See
  • 2002 Toyota Sienna | Owners Manual - Page 247
    or brakes, the vehicle and trailer will stabilize. D Before starting out, check operation of the lights and all vehicle−trailer connections. After driving a short distance, stop and recheck the lights and connections. Before actually towing a trailer, practice turning, stopping and backing with
  • 2002 Toyota Sienna | Owners Manual - Page 248
    turn off the air conditioning (if in use), pull off the road and stop in a safe spot. Refer to "If your vehicle overheats" in Section 4. When restarting out after parking on a slope: 1. With the transmission in "P" position, start the engine. Be sure to keep the brake pedal depressed. 2. Shift
  • 2002 Toyota Sienna | Owners Manual - Page 249
    , dirty plugs, dirty oil and grease, brakes not adjusted, etc. all lower engine performance and contribute to poor fuel economy. For longer life of all parts and lower operating costs, keep all maintenance work on schedule, and if you often drive under severe conditions, see that your vehicle
  • 2002 Toyota Sienna | Owners Manual - Page 250
    02 SIENNA_U (L/O 0107) CAUTION Never turn off the engine to coast down hills. Your power steering and brake booster will not function without the engine running. Also, the emission control system operates properly only when the engine is running. 250 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 251
    02 SIENNA_U (L/O 0107) SECTION IN CASE OF AN EMERGENCY If your vehicle will not start ...If your engine stalls while driving ...If your vehicle overheats ...If you have a flat tire ...If your vehicle needs to be towed ...If you lose your keys ...If
  • 2002 Toyota Sienna | Owners Manual - Page 252
    dealer. (See "Keys (with engine immobiliser system)" in Section 1 −2.) If the engine is not turning over or is turning over too slowly- 1. Check that the battery terminals are tight and clean. 2. If the battery terminals are O.K., switch on the interior light. 3. If the light is out, dim or goes
  • 2002 Toyota Sienna | Owners Manual - Page 253
    . Turn off all unnecessary lights and accessories. 2. If required, remove all the vent plugs from the booster and discharged batteries. Lay a cloth over the open vents on the batteries. (This helps reduce the explosion hazard, personal injuries and burns.) 3. If the engine in the vehicle with the
  • 2002 Toyota Sienna | Owners Manual - Page 254
    terminal on the booster battery. c. Connect the clamp of the negative (black) jumper cable to the negative ( −) terminal on the booster battery. d. Connect the part that moves when the engine is cranked. CAUTION When making the connections, to avoid serious injury, do not lean over the battery
  • 2002 Toyota Sienna | Owners Manual - Page 255
    hear a loud knocking or pinging noise, the engine has probably overheated. You should follow this procedure...1. Pull safely off the road, stop the vehicle and turn on your emergency flashers. Put the transmission in "P" and apply the parking brake. Turn off the air conditioning if it is being used
  • 2002 Toyota Sienna | Owners Manual - Page 256
    CAUTION Do not attempt to remove the radiator cap when the engine and radiator are hot. Serious injury could result from scalding hot fluid and steam blown out under pressure. D Follow jacking instructions. D Do not put any part of your body under the vehicle supported by the jack. Personal injury
  • 2002 Toyota Sienna | Owners Manual - Page 257
    wheel design and color and special wording "TEMPORARY USE ONLY" molded into the side wall of the tire. The standard tire should be repaired and replaced as soon as possible. The compact spare tire saves space in your luggage compartment, and its lighter weight helps to improve fuel economy and
  • 2002 Toyota Sienna | Owners Manual - Page 258
    road conditions and your driving habits. When tread wear indicators appear on the tire, replace the tire. See also the tire section in Section 7 −2 for details on the tread wear indicators and other service any other vehicle. Right side power sliding door models D Do not exceed 80 km
  • 2002 Toyota Sienna | Owners Manual - Page 259
    the jack is firmly secured to prevent it flying forward during a collision or sudden braking. To remove the spare tire; Open the back door and you will find the spare tire clamp bolt near the back door latch. 1. Loosen the spare tire clamp bolt by turning it counterclockwise with the wheel nut
  • 2002 Toyota Sienna | Owners Manual - Page 260
    removal steps in reverse order to prevent it from flying forward during a collision or sudden braking. Make sure to pull the tire straight up without catching on any other part. Do not overtighten the bolt. Stop for the rear wheels. Steel wheels Aluminium wheels 260 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 261
    on the handle. Be careful that the wrench does not slip off the nut. Do not remove the nuts yet-just unscrew them about one−half turn. 5. Position the jack at the correct up the vehicle, turn off the power sliding door system and close the sliding door completely. 2002 MY SIENNA_U (OM45407U) 261
  • 2002 Toyota Sienna | Owners Manual - Page 262
    get under the vehicle when the vehicle is supported by the jack alone. -Changing wheels 6. jack touches the vehicle and begins to lift, double−check that it is properly positioned. 7. Remove the wheel nuts and change tires. Lift the flat back over the other bolts. 262 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 263
    Before putting on wheels, remove any corrosion on the mounting driving. Therefore after the first 1600 km (1000 miles), check to see that the wheel nuts are tight. 8. tighten them as much as you can by hand. Press back on the tire and see if you can tighten them more 2002 MY SIENNA_U (OM45407U) 263
  • 2002 Toyota Sienna | Owners Manual - Page 264
    0107) -Reinstalling wheel ornament CAUTION When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as the vehicle is lowered to the ornament to avoid unexpected personal injury. Steel wheels Aluminum wheels 264 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 265
    02 SIENNA_U (L/O 0107) -After changing wheels 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designed in Section 8. If the pressure is lower, drive slowly to the nearest service station and fill to the correct pressure. Do not forget to reinstall the
  • 2002 Toyota Sienna | Owners Manual - Page 266
    : Use a safety chain system for all towing, and abide by the state/provincial and local laws. The wheels and axle on the ground must be in good condition. If they are damaged, use a towing dolly. (a) Towing with wheel lift type truck From front-Release the parking brake. (c) Towing with sling
  • 2002 Toyota Sienna | Owners Manual - Page 267
    service. If towing service is condition. NOTICE Use only a cable or chain specifically intended for use in towing vehicles. Securely fasten the cable or chain to the towing eyelets provided. Before towing, release the parking brake and put the transmission in "N". The key must be in "ACC" (engine
  • 2002 Toyota Sienna | Owners Manual - Page 268
    keys, you cannot make new keys; the whole engine immobiliser system must be replaced. See the suggestion given in "Keys" in Section door for you, using their special tools. If you must break a window to get in, we suggest breaking the smallest side window because it is the least expensive to replace
  • 2002 Toyota Sienna | Owners Manual - Page 269
    02 SIENNA_U (L/O 0107) SECTION CORROSION PREVENTION AND APPEARANCE CARE 5 Protecting your Toyota from corrosion ...270 Washing and waxing your Toyota ...271 Cleaning the interior ...273 2002 MY SIENNA_U (OM45407U) 269
  • 2002 Toyota Sienna | Owners Manual - Page 270
    available, has done its part to help prevent corrosion debris without removing them. The lower edge of doors, rocker Toyota" for more tips. Check the condition of your vehicle's paint conditions: D Road salt or dust control chemicals will accelerate corrosion, as will the presence of salt in the air
  • 2002 Toyota Sienna | Owners Manual - Page 271
    check in covered with with a hose. Remove any mud or manufacturer's instructions. Use water remove check if the ornament is damaged. The following cases may cause weakness to the paint or corrosion to the body and parts body bumpers: Wash carefully. Do not scrub with abrasive cleaners. The bumper
  • 2002 Toyota Sienna | Owners Manual - Page 272
    Remove paint durability and gloss, especially on darker colors. The manager of the car wash should a separate wax. Carefully follow the manufacturer's instructions and precautions. Be sure to polish and wax the power sliding door system is off. NOTICE Always remove the plastic bumpers if your vehicle
  • 2002 Toyota Sienna | Owners Manual - Page 273
    the floor carpet (or mat) and cause a malfunction; and it may cause body corrosion. Begin by vacuuming thoroughly to remove as much are obtained by keeping the carpet as dry as possible. Read the shampoo instructions and follow them closely. Seat belts The seat belts may be cleaned with mild soap
  • 2002 Toyota Sienna | Owners Manual - Page 274
    the heater wires or connectors. Air conditioning control panel, car audio, instrument detergent for wool. Remove dirt using a soft damp cloth. After cleaning or whenever any part of the leather gets wet, dry with Be especially careful to avoid oil spots. Try to keep your 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 275
    in discoloration or staining. If you have any questions about the cleaning of your Toyota, your local Toyota dealer will be pleased to answer them. 2002 MY SIENNA_U (OM45407U) 275
  • 2002 Toyota Sienna | Owners Manual - Page 276
    02 SIENNA_U (L/O 0107) 276 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 277
    maintenance ...Does your vehicle need repairing? ...Emissions Inspection and Maintenance (I/M) programs ... 6 278 279 281 282 For scheduled maintenance information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". 2002 MY SIENNA_U (OM45407U) 277
  • 2002 Toyota Sienna | Owners Manual - Page 278
    those required to be serviced at regular intervals. For details of your maintenance schedule, read the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". It is recommended that any replacement parts used for maintenance or for the repair of the emission control system be Toyota supplied
  • 2002 Toyota Sienna | Owners Manual - Page 279
    . Fluid leaks Check underneath for leaking fuel, oil, water or other fluid after the vehicle has been parked for a while. If you smell fuel fumes or notice any leak, have the cause found and corrected immediately. Doors and engine hood Check that all the doors operate smoothly and all latches lock
  • 2002 Toyota Sienna | Owners Manual - Page 280
    , stop lights, tail lights, turn signal lights, and other lights are all working. Check headlight aim. Service reminder indicators and warning buzzers Check that all service reminder indicators and warning buzzers function properly. Steering wheel Be alert for changes in steering condition, such
  • 2002 Toyota Sienna | Owners Manual - Page 281
    pinging Appreciable loss of power Strange engine noises A leak under the vehicle (however, water dripping from the air conditioning after use is normal.) indicate a dangerous carbon monoxide leak. Drive with the windows open and have the exhaust system checked immediately.) CAUTION Do not continue
  • 2002 Toyota Sienna | Owners Manual - Page 282
    emission inspection programs which include OBD (On−Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. When the OBD system determines that a problem exists somewhere in the emission control system, the malfunction indicator lamp comes on. In this case
  • 2002 Toyota Sienna | Owners Manual - Page 283
    02 SIENNA_U (L/O 0107) SECTION DO−IT−YOURSELF MAINTENANCE Introduction 7− 1 Engine compartment overview ...284 Fuse locations ...285 Do −it−yourself service precautions ...286 Positioning the jack ...287 Parts and tools ...288 2002 MY SIENNA_U (OM45407U) 283
  • 2002 Toyota Sienna | Owners Manual - Page 284
    overview 1. Engine coolant reservoir 2. Power steering fluid reservoir 3. Engine oil level dipstick 4. Engine oil filler cap 5. Brake fluid reservoir 6. Fuse blocks 7. Battery 8. Radiator 9. Electric cooling fans 10. Condenser 11. Windshield and rear window washer fluid tank 284 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 285
    02 SIENNA_U (L/O 0107) Fuse locations Spare fuses 2002 MY SIENNA_U (OM45407U) 285
  • 2002 Toyota Sienna | Owners Manual - Page 286
    it. To remove used engine oil from your skin, wash thoroughly with soap and water. D If the engine is hot, do not remove D Do not smoke, cause sparks or allow open flames around fuel or the battery. Their fumes are flammable. D Do not get under your vehicle with just the body jack supporting it
  • 2002 Toyota Sienna | Owners Manual - Page 287
    or radio noise. z Do not reuse iridium−tipped spark plugs by cleaning or regapping. z Do not overfill automatic transmission fluid and power steering fluid, or the transmission and power steering could be damaged. z Do not drive with the air cleaner filter removed, or excessive engine wear could
  • 2002 Toyota Sienna | Owners Manual - Page 288
    is supported by the jack. D Rag or paper towel D Funnel (only for adding oil) CHECKING LEVEL THE ENGINE COOLANT D Stop the vehicle on a level firm ground, firmly set the parking brake and put the transmission in "P". Block the wheels on the opposite side of the jack up point if necessary. Parts
  • 2002 Toyota Sienna | Owners Manual - Page 289
    containing antifreeze (for winter use) Tools: D Automatic Tools: transmission DEXRON®II or III fluid D Funnel REPLACING LIGHT BULBS Parts: D Rag or paper towel D Funnel (only for adding fluid) CHECKING BATTERY CONDITION Tools: D Bulb with same number and wattage rating as original (See charts
  • 2002 Toyota Sienna | Owners Manual - Page 290
    02 SIENNA_U (L/O 0107) 290 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 291
    295 295 296 297 298 299 300 301 Checking the engine oil level ...Checking the engine coolant level ...Checking the radiator and condenser ...Checking brake fluid ...Checking power steering fluid ...Checking tire pressure ...Checking and replacing tires ...Rotating tires ...Installing snow tires and
  • 2002 Toyota Sienna | Owners Manual - Page 292
    only slightly above the low level, add engine oil of the same type as already in the engine. Add oil O.K. Too full 5W-30 Preferred Remove the oil filler cap and add engine oil in small quantities at a time, checking the dipstick. The approximate quantity of oil needed to fill between the low level
  • 2002 Toyota Sienna | Owners Manual - Page 293
    that the oil has fuel −saving check the radiator, hoses, engine coolant filler cap, radiator cap and drain cock and water pump. If you can find no leak, have your Toyota dealer test the cap pressure and check for leaks in the cooling system. API service symbol ILSAC certification mark 2002
  • 2002 Toyota Sienna | Owners Manual - Page 294
    02 SIENNA_U (L/O 0107) Checking the radiator and condenser CAUTION To prevent burning yourself, do not remove the radiator cap when the engine is hot. Coolant type selection Use of improper coolants may damage your engine cooling system. Your coolant must contain ethylene−glycol type coolant for a
  • 2002 Toyota Sienna | Owners Manual - Page 295
    SIENNA_U (L/O 0107) Checking brake fluid If the level is low, add SAE J1703 or FMVSS No.116 DOT 3 brake fluid to the brake reservoir. Remove and replace the reservoir cap by hand. Fill the brake fluid to the dotted line. This brings the fluid to the correct level when you put the cap back on. Use
  • 2002 Toyota Sienna | Owners Manual - Page 296
    low side of either range, add automatic transmission fluid DEXRONr II or III to bring the level within the range. To remove the reservoir cap, turn it counterclockwise and lift up. To reinstall it, turn it clockwise. After replacing the reservoir cap, visually check the steering box case, vane pump
  • 2002 Toyota Sienna | Owners Manual - Page 297
    air leakage. If the caps have been lost, have new ones put on as soon as possible. CHECKING YOUR TIRES Check the tires tread for the tread wear indicators. If the indicators show, replace the tread wears down below 4 mm (0.16 in.). 2002 MY SIENNA_U (OM45407U) Tires deteriorate with age even if
  • 2002 Toyota Sienna | Owners Manual - Page 298
    system is necessary after you have replaced your tires. See "Tire pressure warning system" in Section 1−6. D Do not mix radial, bias belted, use and should therefore be balanced occasionally. When replacing a tubeless tire, the air valve should also be replaced with a new one. Steel wheels with a
  • 2002 Toyota Sienna | Owners Manual - Page 299
    and road surface conditions. See "If you have a flat tire" in Section 4 for tire change procedure. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pressure, improper wheel alignment, out −of −balance wheels, or severe braking. WHEN TO CHAINS
  • 2002 Toyota Sienna | Owners Manual - Page 300
    type may adversely affect handling, wheel and bearing life, brake cooling, speedometer/odometer calibration, stopping ability, headlight aim, bumper height, vehicle ground clearance, and tire or snow chain clearance to the body and chassis. Replacement with used wheels is not recommended as they may
  • 2002 Toyota Sienna | Owners Manual - Page 301
    nuts and wrench designed for wheels. your aluminum D When balancing your wheels, use only Toyota balance weights or equivalent and a plastic or rubber hammer. D As with any wheel, periodically check your aluminum wheels for damage. If damaged, replace immediately. 2002 MY SIENNA_U (OM45407U) 301
  • 2002 Toyota Sienna | Owners Manual - Page 302
    02 SIENNA_U (L/O 0107) 302 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 303
    02 SIENNA_U (L/O 0107) SECTION DO−IT−YOURSELF MAINTENANCE Electrical components 7− 3 Checking battery condition ...304 Battery recharging precautions ...305 Checking and replacing fuses ...306 Adding washer fluid ...307 Replacing light bulbs ...307 2002 MY SIENNA_U (OM45407U) 303
  • 2002 Toyota Sienna | Owners Manual - Page 304
    02 SIENNA_U (L/O 0107) Checking battery condition- -Precautions CAUTION BATTERY PRECAUTIONS The battery produces flammable and explosive hydrogen gas. -Checking battery exterior D If electrolyte gets on your skin, thoroughly wash the contact area. If you feel pain or burning, get medical attention
  • 2002 Toyota Sienna | Owners Manual - Page 305
    02 SIENNA_U (L/O 0107) -Checking battery condition NOTICE z Be sure the engine and all accessories are off before performing maintenance. z When checking the battery, remove the ground cable from the negative terminal (" −" mark) first and reinstall it last. z Be careful not to cause a short
  • 2002 Toyota Sienna | Owners Manual - Page 306
    other electrical components do not work, check the fuses. If any of the fuses are blown, they must be replaced. See "Fuse locations" in Section check it. Determine which fuse may be causing the problem. The lid of the fuse box shows the name of the circuit for each fuse. See Section 8 of this manual
  • 2002 Toyota Sienna | Owners Manual - Page 307
    where temperatures range below freezing point, use washer fluid containing antifreeze. This product is available at your Toyota dealer and most auto parts stores. Follow the manufacturer's directions for how much to mix with water. Replacing light bulbs- The following illustrations show how to gain
  • 2002 Toyota Sienna | Owners Manual - Page 308
    side marker lights Rear turn signal lights Stop/tail lights Back −up lights License plate lights High mounted stoplight Front personal lights Front interior light Center personal lights Rear interior light Vanity mirror lights Door courtesy lights Luggage compartment light A: B: C: D: E: HB2 halogen
  • 2002 Toyota Sienna | Owners Manual - Page 309
    . Remove the rubber cover. If the connector is tight, wiggle it. 2. Release the bulb retaining spring and remove the cover fits snugly on the connector and the headlight body. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact your Toyota dealer. 2002
  • 2002 Toyota Sienna | Owners Manual - Page 310
    -Front fog lights If either the left or right front fog burns out, contact your Toyota dealer. -Front turn signal and parking/side marker lights NOTICE Do not try to replace the front fog lights bulbs by yourself. You may damage the vehicle. Use a Phillips−head screwdriver. 310 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 311
    02 SIENNA_U (L/O 0107) -Rear turn signal and, stop/tail lights -Stop/tail and back −up lights Left side of the vehicle Remove the bolts. a: Stop/tail light b: Rear turn signal light Right side of the vehicle Remove the strap and handle. 2002 MY SIENNA_U (OM45407U) 311
  • 2002 Toyota Sienna | Owners Manual - Page 312
    02 SIENNA_U (L/O 0107) -License plate lights a: Back−up light b: Stop/tail light Use a Phillips−head screwdriver. 312 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 313
    02 SIENNA_U (L/O 0107) -High mounted stoplight Use a Phillips−head screwdriver. 2002 MY SIENNA_U (OM45407U) 313
  • 2002 Toyota Sienna | Owners Manual - Page 314
    02 SIENNA_U (L/O 0107) 314 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 315
    02 SIENNA_U (L/O 0107) SECTION SPECIFICATIONS 8 Dimensions and weight ...316 Engine ...316 Fuel ...317 Service specifications ...317 Tires ...319 Fuses ...320 2002 MY SIENNA_U (OM45407U) 315
  • 2002 Toyota Sienna | Owners Manual - Page 316
    02 SIENNA_U (L/O 0107) Dimensions and weight Overall length Overall width Overall height Wheelbase Front tread Rear tread Vehicle capacity weight (occupants + luggage) ∗: Engine mm (in.) mm (in.) mm (in.) mm (in 1565 1610 (61.6) (63.4) 511 (1127) Unladen vehicle 316 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 317
    043) Drive belt tension measured with Borroughs drive belt tension gauge No.BT−33−73F (used belt), Ibf: Generator belt 125"10 Power steering pump belt 115"20 ENGINE LUBRICATION Oil capacity (drain and refill), L (qt., Imp. qt.): With filter 4.7 (5.0, 4.1) Without filter 4.5 (4.8, 4.0) Oil grade: API
  • 2002 Toyota Sienna | Owners Manual - Page 318
    that is checked 20 minutes after the key is removed with all the lights turned off Charging rates: 5 A max. AUTOMATIC TRANSAXLE Fluid capacity (drain and refill), L (qt., Imp. qt.): Up to 4.75 (5.0, 4.2) Fluid type: Automatic transmission fluid DEXRONr III (DEXRONr II) 318 2002 MY SIENNA_U
  • 2002 Toyota Sienna | Owners Manual - Page 319
    2JJ 6 1/2JJ 4T NOTE: For a complete information on tires (e.g. replacing tires or replacing wheels), see "Checking tire pressure" through "Aluminum wheel precautions" in Section 7 −2. Vehicle load up to 6 passengers Up to vehicle capacity weight Tire pressure, kPa (kgf/cm2 or bar, psi) 240 (2.4, 35
  • 2002 Toyota Sienna | Owners Manual - Page 320
    HTR 25 A: Air fuel ratio sensor 3. SPARE 10 A: Spare fuse 4. SPARE 15 A: Spare fuse 5. SPARE 30 A: Spare fuse 6. ALT−S 5 A: Charging system 7. HEAD (RH) 15 A: Right −hand headlight (high beam) 8. EFI 15 A: Multiport fuel injection system/sequential multiport fuel injection system Engine compartment
  • 2002 Toyota Sienna | Owners Manual - Page 321
    21. ABS NO.4 5 A: Vehicle skid control system 22. HEATER 10 A: Air conditioning system, rear window defogger 23. GAUGE 10 A: Gauges and meters, service reminder indicators and warning buzzers (except discharge and open door warning light), power windows, daytime running light system, back −up lights
  • 2002 Toyota Sienna | Owners Manual - Page 322
    multiport fuel injection system 34. DOOR 25 A: Power door lock system, theft deterrent system 35. PANEL 7.5 A: Gauge and meter, car audio system, clock, air conditioning system, instrument panel light control, rear window defogger, electronically controlled automatic transmission system, emergency
  • 2002 Toyota Sienna | Owners Manual - Page 323
    02 SIENNA_U (L/O 0107) SECTION 9 REPORTING SAFETY DEFECTS FOR U.S. OWNERS AND UNIFORM TIRE QUALITY GRADING Reporting safety defects for U.S. owners ...324 Uniform tire quality grading ...324 2002 MY SIENNA_U (OM45407U) 323
  • 2002 Toyota Sienna | Owners Manual - Page 324
    of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To contact NHTSA, you may either For example: Treadwear 200 Traction AA Temperature A 324 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 325
    the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on braking (straight ahead) traction tests
  • 2002 Toyota Sienna | Owners Manual - Page 326
    02 SIENNA_U (L/O 0107) 326 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 327
    and have all the occupants follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble−free motoring. For important information about this manual and your Toyota, read the following pages carefully. When it comes to service, remember that your Toyota dealer knows
  • 2002 Toyota Sienna | Owners Manual - Page 328
    or damage. The types of warnings, what they look like, and how they are used in this manual are explained as follows: Safety symbol CAUTION This is a warning against something which may cause injury to people not..."; "Do not do this"; or "Do not let this happen". ii 2002 MY SIENNA_U (OM45407U)
  • 2002 Toyota Sienna | Owners Manual - Page 329
    new vehicle is covered by the following Toyota limited warranties: D New vehicle warranty D Emission control systems warranty D Others For further information, please refer to the "Owner's Warranty Information Booklet" or "Owner's Manual Supplement". Accessories, spare parts and modification of
  • 2002 Toyota Sienna | Owners Manual - Page 330
    system/sequential multiport fuel injection system, cruise control system, anti −lock brake system, traction control system, vehicle skid control system, SRS airbag system and seat belt pretensioner system, be sure to check with your Toyota dealer for precautionary measures or special instructions
  • 2002 Toyota Sienna | Owners Manual - Page 331
    page 224 for detailed information. Fuel tank capacity: 79 L (21 gal., 17.5 lmp. gal.) Engine oil: API grade SJ, "Energy −Conserving" or ILSAC multigrade engine oil is recommended. See page 292 for detailed information. Automatic transmission fluid: Automatic transmission fluid D −II or DEXRONrIII
  • 2002 Toyota Sienna | Owners Manual - Page 332
    know as much about the quality and importance of proper maintenance of your new vehicle as the people who built it. The Toyota authorized Repair Manual tells you how to maintain your vehicle and enables you to correctly perform your own maintenance. The best way to keep your new vehicle in
  • 2002 Toyota Sienna | Owners Manual - Page 333
    adjustment and engine oil and filter replacement. Where to obtain the Repair Manual The repair manual for SIENNA, written in English, may be purchased as applicable from any Toyota dealer. Pub. Name: 2002 SIENNA Repair Manual Pub. No.: RM871U1 (Maintenance, Preparation, Service specifications and
  • 2002 Toyota Sienna | Owners Manual - Page 334
    02 SIENNA_U (L/O 0107) WE REALLY CARE ABOUT YOU Ċ PLEASE BUCKLE UP Toyota has made a special effort to encourage use of seat belts. Toyota belts are: D Comfortable D Easy to use D Convenient We encourage you to use your belts every time you drive. U

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.