2004 Toyota Sienna Navigation Manual
2004 Toyota Sienna Manual
2004 Toyota Sienna manual content summary:
- 2004 Toyota Sienna | Navigation Manual - Page 1
...49 Displaying POI ...51 Turn list ...52 Map appearance ...55 Map scale ...57 Screen scrolling ...58 Orientation of the map ...59 Limitations of the navigation system ...59 Map database information and updates ...62 1 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 2
injured. Inputting letters and numbers The navigation system is operated by switches on the screen and the buttons located on the front face around the screen. When you touch a switch or push a button, a beep sounds. When using the switches on the touch screen, please use only light pressure with - 2004 Toyota Sienna | Navigation Manual - Page 3
. Touching will scroll the name to the beginning of the name. L00014 Touching the "A-Z" switch changes the screen back to the previous name input display. To scroll up or down one item at a time. This expresses a displayed screen position. 3 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 4
Sienna_Navi_U (L/O 0309) How to move the cursor L00016 1. Touch the "Adjust" switch to move the cursor . 4 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 5
touch an arrow facing your desired point, the map scrolls in that direction. When you release your finger, scrolling stops. 3. If you touch the "Enter" switch, the position of cursor is set. 5 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 6
. Touch the "Change" switch on the "Destination switches to select a search area. Touch the "OK" switch and the "Destination" screen returns. Touch Once you choose the area to search, you can use one of 11 different methods to enter your destination. US1 US2 US3 US4 US5 US6 6 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 7
the detailed steps. - switches on the "Destination" screen): You can select one of 5 preset destinations 2. By Preset Destination ( directly. To use this function, it is necessary to register the destinations beforehand. See page 11 for the detailed steps. 7 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 8
You can select one of the many points of interest that have been already stored in the system's database. There are about 50 categories to choose from, including restaurants, banks and automotive locations. See page 14 for the detailed steps. 8 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 9
can select one of the three points of emergency service points that have been already stored in the system's database. See page 21 for the detailed steps point where the system has started to guide last time. See page 24 for the detailed steps. 9 2004 SIENNA Navigation from Sep. '03 Prod. ( - 2004 Toyota Sienna | Navigation Manual - Page 10
24 for the detailed steps. INFORMATION D When inputting the destination, the response to the switch may be slow. D "Points of Interest" the road condition in mind. If a traffic sign on the road has been changed, the route guidance may provide wrong information. 10 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 11
house number. L00021 After inputting a house number, touch the "Enter" switch to display the screen which you can input a street name. It is possible to input a street name first. Touch the "Street" switch to display the screen which you can input a street name. 11 2004 SIENNA Navigation from Sep - 2004 Toyota Sienna | Navigation Manual - Page 12
"City Select" screen. Select or enter your desired city. L00023 If you input a street name first, the screen changes. You can then input the house number. L00024 If the above screen appears, you can select an address range on that screen. 12 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 13
L00026 Input the city name. After the number decreases to some extent, touch the "List" switch to display the city selection list. If the number of matches decreases to 4 or less, the screen changes automatically to the selection list. Touch the name. of the desired city 13 2004 SIENNA Navigation - 2004 Toyota Sienna | Navigation Manual - Page 14
destination" on page 25.) If the same name exists in more than one city, you can search it more easily with the "City" and "Category" switch. (See "(b) Selecting a city to search" and "(c) Selecting from the categories".) 14 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 15
desired city name. The current screen changes to the screen which is for inputting a name of POI. All input the name of the POI. The categories are shown on the screen. When you touch the symbol switch of your desired category, more detailed categories are shown. L00031 L00032 15 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 16
on page 25.) L00036 Touch the "Info." switch on the screen to display the selected destination name, address and phone number. INFORMATION The desired point of interest can be displayed on the map screen. (For details, see page 51.) L00034 16 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 17
MEXICAN RENTAL CAR AGENCY CHINESE SEAFOOD TOYOTA DEALERSHIPS (all search areas) FRENCH SHOPPING LEXUS DEALERSHIPS (all search areas) ITALIAN GROCERY STORE AUTOMOBILE CLUB OTHER GAS STATION AUTO SERVICE & MAINTENANCE AMERICAN PARKING GARAGE/HOUSE HOTEL 17 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 18
areas) CASINO HOSPITAL BUS STATION MARINA PARK/RECREATION (all search areas) COMMUTER RAIL STATION TOURIST ATTRACTION (all search areas) CIVIC/COMMUNITY CENTER FERRY TERMINAL 18 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 19
desired item, the screen changes and displays the map location of the selected destination and the route preference. (See "(a) Entering destination" on page 25.) HISTORICAL MONUMENTS BUSINESS FACILITY PERFORMING ARTS CITY CENTER/NAMED PLACE MUSEUM BANK 19 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 20
. Touch the "Del. prev. dest." switch. When you touch the switch for each previous destination or the "Delete all" switch, a message appears to confirm your request. If you are sure, touch the "Yes" switch. If not, touch the "No" switch. 20 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 21
screen changes and displays the map location of the selected destination and the route preference. (See "(a) Entering destination" on page 25.) Touch the "Info." switch on the screen to display the selected emergency destination name, address and telephone number. 21 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 22
than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and the route preference. (See "(a) Entering destination" on page 25.) 22 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 23
EXIT To input a freeway entrance or exit, touch the "FWY Ent./Exit" switch on changes and displays the map location of the selected destination and the route preference. (See "(a) Entering destination" on page 25.) L00046 You can then select either a freeway "Entrance" or "Exit". 23 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 24
Touch this switch to list the entrances or exits in alphabetical order. The screen changes and displays the map location that was previously displayed just before the destination input operation and the route preference. (See "(a) Entering destination" on page 25.) 24 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 25
Setting and deleting destination (a) Entering destination After you input the destination, the screen changes and displays the map location of the selected destination and the route preference. You are given a number of choices on the conditions which the system uses to determine the route to your - 2004 Toyota Sienna | Navigation Manual - Page 26
route is indicated by a purple line. Alternative: Other route This route is indicated by a green line. Touch the switch to select the 3routes" switch. 3 types of the routes are displayed on the screen. 1. Touch the "MENU" tab on the screen to display the "Menu" screen. 26 2004 SIENNA Navigation - 2004 Toyota Sienna | Navigation Manual - Page 27
Sienna_Navi_U (L/O 0309) L00059 2. Touch the "Edit route" switch. L00056 3. Touch the "Add" switch under "Destination". 4. Input an additional destination in the same way as the destination input. (See page 25.) 27 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 28
Sienna_Navi_U (L/O 0309) L00055 5. The add destination screen appears. Touch the "Add" switch that you want to add a destination. 28 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 29
Sienna_Navi_U (L/O 0309) (c) Reorder destinations 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Edit route" switch. L00056 2. Touch the "Reorder" switch under "Destination". 29 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 30
the "OK" switch. The previous screen returns. switch. L00056 1. Touch the "Delete" switch under "Destination". L00058 30 2. Touch the switch next to the destination where you want to delete. Touch the "Delete all" switch if you want to delete all destinations. 2004 SIENNA Navigation from Sep - 2004 Toyota Sienna | Navigation Manual - Page 31
location and touch the "Preferred road" switch. Messages appear to confirm your request on the screen. Touch the "Enter" switch to register the road. L00056 Touch the "Add" switch under "Set preferred road". The following screen appears. 31 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 32
. Touch the "Add" switch where you want to add a preferred road. Touch the "Modify" switch under "Set preferred road". The "Modify preferred road" screen appears. Follow the same procedure as when adding a preferred road. (See page 31.) L00063 L00062 32 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 33
cancel deletion, touch the "No" switch. The previous screen will return. "Delete all" switch if you want to delete all preferred 3. Messages appear to confirm your request to delete the preferred road. To delete the road(s), touch the "Yes" switch. 33 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 34
screen, see page 55.) The two route guidance screens have a number of indicators and switches with which you should be familiar. L00068 L00073 Dual map: Two different maps are shown in a screen. Map/guidance: Changes the screen mode. 34 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 35
System), this mark appears. (For details, see page 59.) Magnifies or reduces the map scale. (For details, see page 57.) Touch this switch . L00066 Search condition: To change the condition for reroute. Detour: To change the condition for detour. 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 36
"Route preview" switch on the "Menu" screen. The "Route preview" screen appears. To review the route to the previous starting point in fast- forward mode To indicate the previous starting review the route to the previous starting point 36 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 37
) L00071 Touch the "Edit" switch to display the "Edit route preview" screen. To next POI: Preview the next POI. To next : Preview the next destination. Delete: Delete the POI icon. Select POI: Select the POI icon. Touch the "OK" switch after selection. 37 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 38
After the battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed. If you must correct the current position manually, follow the steps on page 90. 38 2004 SIENNA Navigation - 2004 Toyota Sienna | Navigation Manual - Page 39
Touch any number to select the desired volume. Touching the "Off" switch turns the voice route guidance off. If you turn the "Adaptive volume continues even gation screen is changed er screens, such as screen. the voice if the navito the oththe audio 3 4 39 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 40
ft.) The system announces your approach to the final destination. 1 2 "Your destination is ahead." "You have arrived at your destination. The route guidance is now finished." 1 2 3 3 4 5 "In half of a mile, make a legal U- turn." "Make a legal U- turn ahead." (Beep sound only) 40 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 41
the system cannot determine the current vehicle position correctly (in cases of poor GPS signal reception), the voice guidance may be made early or delayed. D If you did not hear the voice guidance command, touch the "MAP/ VOICE" tab on the screen to hear it again. 41 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 42
can easily set the route back to your home. L00059 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00076 "Reg. home" 2. Touch the switch on the "Marked points" screen to register your home. 42 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 43
) If your home is already registered, the "Delete home" switch will appear. L00077 You may register the location of your home select your desired method from the menu. Input your home in the same way as the destination input. (See page 25.) 43 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 44
Sienna_Navi_U (L/O 0309) DELETING YOUR HOME L00059 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00078 2. Touch the "Delete home" switch on the "Marked points" screen. 44 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 45
to delete, touch the "Yes" switch. If not, touch the "No" switch. 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00080 2. Touch the "Register" switch under "Preset destinations 1 ~ 5 ". 45 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 46
3. Touch any of the - switches for which you want to register the preset destination. If you have already registered a preset destination, you can overwrite it. L00082 4. Input the preset destination in the same way as the destination input. (See page 25.) 46 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 47
tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00080 2. Touch the "Edit" switch under "Preset destinations 1 ~ 5 ". L00083 3. Select the destination that you want to edit and touch the switch. 47 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 48
as editing marked points. Touch the "Change" switch. (See page 78.) 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00080 2. Touch the "Delete" switch under "Preset destinations 1 ~ 5 ". 48 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 49
how the system would route you around a delay caused by a traffic jam. Touch the "Chg. route" switch if you encounter a reason to divert from the selected route. 1 This part indicates the location where traffic jam is occurring due to road repairs or an accident. 49 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 50
detour. Touch one of the numeral keys to start the detour process. After detouring, the system returns to the original guidance route. Whole route: If you touch this switch, the system will calculate an entire new route to the destination. 50 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 51
the categories. The system will list the points within 20 miles. You can sort the local POI list three different ways as follows. Icon: In the order of the POI icons Dist: In the order of distance from your current location Name: In alphabetical order by name L00087 51 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 52
your desired point of interest overlaps with the cursor, touch the "Enter" switch. The screen changes and displays the map location of the selected destination and route preference. ( the "Menu" screen and touch the "Route overview" switch. 52 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 53
Sienna_Navi_U (L/O 0309) L00091 2. The screen will change to the entire route map screen where you can touch the "Turn list" switch. 53 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 54
0309) L00092 Touch the "Map" switch of your desired point. The point change will not appear on the list. The street name closest to the starting point will be displayed with a mileage to the next turn. These marks indicate the direction which you should turn at an intersection. 54 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 55
screen by touching the map/ guidance switch while the map screen is displayed. You can choose one of two types of guidance screens. L00059 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Map appearance" switch. 55 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 56
(L/O 0309) L00094 2. The screen will change to the "Map appearance" screen and you change the scale of the right side map by touching it. The screen turns into edit mode. You can also choose to display POI icons on the right side map. Single map Dual map L00074 L00097 56 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 57
on the switch, the scale bar changes smoothly. You can change the scale of the map display by touching the scale bar directly. It is not available during driving. The map scale is displayed under the north- up symbol or heading- up symbol at the top left of the screen. 57 2004 SIENNA Navigation - 2004 Toyota Sienna | Navigation Manual - Page 58
disappear. When the map scale is at the minimum range of 1/32nd mile, will disappear. If you touch switches such as "Mark" , "POI" , etc., the screen does not scroll and the selected function operates. you touched is set as the destination. 58 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 59
not be shown depending on the satellite condition, road configuration, vehicle condition or other circumstances. The Global Positioning System (GPS) developed and operated by the the vehicle travel is always up. A red arrow indicates North. 59 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 60
a covered parking lot or parking garage. D When a roof carrier is installed. D When driving with the tire chains installed. D When the tires are worn. D After replacing a tire or tires. D When using tires that are smaller or larger than the factory specifications. 60 2004 SIENNA Navigation - 2004 Toyota Sienna | Navigation Manual - Page 61
GPS signals, you can correct the current position manually. For the information on setting the current changed. D An unnecessary U- turn may be shown or announced. D A location may have multiple names and the system will announce one or more. D Some routes may not be searched. 61 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 62
the names of roads, streets, facilities, and their locations are often changed. In some places, construction on roads may be in progress. For that reason, information on some areas in this system might be different from the actual location. 62 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 63
" illustrations. Route guidance available areas may change due to the upgrading of the map data. The map database is normally updated once a year. Contact your Toyota dealer for information about the availability and pricing of an update. 63 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 64
Sienna_Navi_U (L/O 0309) Route guidance availability NZY019 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 64 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 65
Sienna_Navi_U (L/O 0309) Route guidance availability NZY020 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 65 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 66
Sienna_Navi_U (L/O 0309) Route guidance availability NZY021 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 66 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 67
Sienna_Navi_U (L/O 0309) Route guidance availability NZY022 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 67 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 68
Sienna_Navi_U (L/O 0309) Route guidance availability NZY023 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 68 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 69
Sienna_Navi_U (L/O 0309) Route guidance availability NZY024 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 69 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 70
Sienna_Navi_U (L/O 0309) Route guidance availability NZY025 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 70 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 71
Sienna_Navi_U (L/O 0309) Route guidance availability NZY026 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 71 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 72
Sienna_Navi_U (L/O 0309) Route guidance availability NZY027 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 72 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 73
Sienna_Navi_U (L/O 0309) Route guidance availability NZY028 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 73 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 74
Sienna_Navi_U (L/O 0309) Route guidance availability NZY029 2002 by NAVTECH Route guidance available areas Route guidance available for main roads only 74 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 75
Sienna_Navi_U (L/O 0309) 75 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 76
Sienna_Navi_U (L/O 0309) SECTION ADVANCED FUNCTIONS II Descriptions of operations for more effective use Marked points ...77 Area to avoid ...85 Current position calibration ...90 76 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 77
use the marked points to input a destination. (a) Registering marked points L00059 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00078 2. Touch the "Register" switch under "Marked points". 77 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 78
as any destination input. See pages 10 through 24. 3. After you finish registering the marked point, touch the "Back" switch. INFORMATION Up to 100 marked points can be registered. Once a marked point is registered, you can edit the icon, name or telephone number. 78 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 79
Sienna_Navi_U (L/O 0309) 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00078 2. Touch the "Edit" switch under "Marked points". 79 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 80
select one of 46 icons. When you touch the desired icon or "Back" , or complete the direction setting, the previous screen is displayed. sound: When you set "With for these icons, a buzzer sounds as your vehicle approaches them. With sound" 80 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 81
be displayed. If you touch the "Off" switch of "Show name", the name of the marked point will not be shown on the map. Touch numeral keys directly. After you finish your entry, touch the "OK" switch. The previous screen will be displayed. 81 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 82
. The previous screen will return. After you finish any editing, touch the "Back" switch on the first screen of "Edit marked points". If you want to register a new point, delete one of the marked points. See "(c) Deleting marked points". 82 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 83
(L/O 0309) 1. Touch the "MENU" tab on the screen to display the "Menu" screen and touch the "Marked points" switch. L00078 2. Touch the "Delete" switch under "Marked points". L00112 3. Touch of the marked point to delete. 83 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 84
want to delete, touch the "Yes" switch. To cancel the deletion, touch the "No" or "Back" switch. L00115 You can register your current position switch. L00116 L00113 When you touch the "Mark" switch, the above screen appears for a few seconds, and then the map screen returns. 84 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 85
point is shown by the map. on To change the icon or name, etc., see "(b) Editing marked points". You can register up to 100 marked points. If you attempt to register more than 100, a message appears for confirmation. L00078 L00118 85 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 86
able to be set as an avoid point. D If a destination is input in the avoid area or the route calculation cannot be made without running switch under "Area to avoid". L00119 2. Find the area to avoid in the same way as you find any destination. (See pages 10 through 24.) L00120 86 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 87
(b) want to avoid. Editing area to avoid L00121 4. Depending on the contents to be edited, touch either When you touch the "OK" switch, the following message appears. or switch. After a few seconds, the avoid area screen returns. L00122 87 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 88
L00125 You can edit the name, location and size of the area to avoid. Touch the change switch of any item that you want to edit. 3. Edit the name, location or size of the area to avoid. When editing is completed, touch the "OK" switch. 88 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 89
. D For magnification or reduction of the map scale, see page 57. 1. Touch the (c) Deleting area to avoid "Delete" switch under "Area to avoid" to display the "Delete area to avoid" screen. L00126 2. Select the area you want to delete. 89 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 90
the current position mark manually. If you want to try again or cancel the deletion, touch the "No" switch. The previous screen will return. L00059 1. Touch the "MENU" tab on the screen to display the "Menu" screen, and touch the "Setup" switch. 90 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 91
(L/O 0309) L00129 2. Touch the "Calibration" switch. L00129 3. Touch the "Position/Direction" switch. INFORMATION For additional information on current position accuracy, see "Limitations of the navigation system" on page 59. 91 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 92
to your desired location. "OK" switch. L00131 2. Touch either the left or right arrow to correct the direction of the current vehicle position mark. Touch the "OK" switch on the screen and the map screen returns. TIRE CHANGE CALIBRATION 92 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 93
fast distance tire calibra"Tire tion procedure, touch the change" switch on the "Calibration" screen. L00132 The above message appears and the fast distance calibration is automatically started. A few seconds later, the map screen returns. 93 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 94
97 Adjusting time zone ...101 Distance indication ...104 Notification of seasonal restrictions ...105 Voice guidance in all modes ...106 Current street name ...108 Maintenance information ...109 Dealer setting ...112 Calendar with memo ...116 94 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 95
3. Touch the "OK" switch on the screen and the previous screen returns. Auto reroute: You can set the system will or will not automatically " switch on the screen. All of the settings can be defaulted. Map color (day or night): You can select your desired map color. 95 2004 SIENNA Navigation - 2004 Toyota Sienna | Navigation Manual - Page 96
switch to return to the map screen. When the auto reroute feature is turned on, the system will automatically search for a new route to the destination if you leave the guidance route. This feature does not operate while you are driving on roads where the guidance is not available. 96 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 97
you back to the previous route depending on how far you are off the original guidance route. When the "Estimated travel time" feature is turned on, the time required to reach the destination is displayed on the route guidance screen. L00059 To turn the "Estimated travel time" on: 97 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 98
Sienna_Navi_U (L/O 0309) 1. Touch the "MENU" tab on the screen to display the "Menu" screen, and touch the "Setup" switch. 98 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 99
Sienna_Navi_U (L/O 0309) L00134 2. Touch the "On" switch of the Estimated travel time. If you cannot find the item on the list, touch up or down the list. or to scroll 99 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 100
for driving on a freeway, main street and residential road. If you touch the "Default" switch, the default speed is set at each item. 3. After you finish setting the desired speeds, touch the "OK" switch. The "Setup" screen returns. 100 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 101
along the guidance route. D The time shown may vary greatly depending on your progress along the route (which may be affected by road conditions such as traffic jams, construction work, etc.) D Up to 99 hours 59 minutes can be displayed. 101 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 102
Sienna_Navi_U (L/O 0309) 1. Touch the "MENU" tab on the screen. L00059 2. Touch the "Setup" switch. L00162 102 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 103
on the display. L00163 4. Select your desired time zone. The selected switch is highlighted in green. Touch the "On" switch and then touch or to set daylight saving time. 5. Touch the "OK" switch on the screen. The "Setup" screen returns. 103 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 104
Sienna_Navi_U (L/O 0309) Distance indication 1. Touch the "MENU" tab on the screen. L00059 2. Touch the "Setup" switch. L00161 3. Touch 4. Touch the "km" or "mile" "OK" switch. to select your desired units. 104 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 105
Sienna_Navi_U (L/O 0309) Notification of seasonal restrictions 1. Touch the "MENU" tab on the screen. L00059 2. Touch the "Setup" switch. L00149 105 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 106
(L/O 0309) 3. Touch the map. "On" switch of the "Notify Voice seasonal restrict". in Touch "OK" switch. The screen returns to the previous guidance all the modes L00150 The restricted road icon and message will appear on the screen. 106 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 107
Sienna_Navi_U (L/O 0309) 1. Touch the "MENU" tab on the screen. L00059 2. Touch the "Setup" switch. L00164 3. Touch the "On" switch on the right of "Voice guide in all modes". 107 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 108
Sienna_Navi_U (L/O 0309) Current street name 1. Touch the "MENU" tab on the screen. L00059 2. Touch the "Setup" switch. L00147 3. Touch the "On" switch on the right of "Current street name". 108 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 109
.) When the system begins operating after reaching either the Information Item's date or driving distance, the "Information" screen will be displayed. To avoid seeing the "Information" screen again, touch the "Do not display this message again" switch. NZN044 109 2004 SIENNA Navigation from Sep - 2004 Toyota Sienna | Navigation Manual - Page 110
Sienna_Navi_U (L/O 0309) 1. Push the "INFO" button to display the "Information Menu" screen, and then touch the "Maintenance" switch. L00137 2. Touch your desired icon and input the conditions. 110 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 111
Maintenance Guide" or "Owner's Manual Supplement". D Depending on your driving or the road conditions, the system may have a time- lag between the data which has been input and the actual date and driving distance. Rotate tires Replace tires Replace battery Replace brake linings Replace wiper - 2004 Toyota Sienna | Navigation Manual - Page 112
dealer Replace brake fluid Replace ATF L00137 You can register your dealer's name and address. Touch the "Set dealer" switch on the "Maintenance" screen. L00139 Scheduled maintenance Replace air filter Personal 1. Enter your dealer's location address in the same way as you input any - 2004 Toyota Sienna | Navigation Manual - Page 113
".) Touch the "View map" switch of "Edit dealer" to see the location of the dealer and route preferences. (See "(a) Entering destination" on page 25.) L00141 "Change" switch of the item to be edited. 1. Touch the "Set dealer" switch and touch the 113 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 114
Touch alphabet or numeral keys directly to input the name. After you finish your entry, touch the "OK" switch. The previous screen will be displayed. the "OK" switch. The previous screen will be displayed. After you finish any editing, touch the "Back" switch. 114 2004 SIENNA Navigation from Sep. - 2004 Toyota Sienna | Navigation Manual - Page 115
Touch the "Set dealer" switch and then touch the "Delete dealer" switch. L00146 2. A selected point will appear. Also, a message will appear at the bottom of the screen. To delete, touch the switch. To cancel the deletion, touch the "No" switch. "Yes" 115 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 116
the memo you entered. When the system begins operating after reaching the memo's date, the Information screen will be displayed. The Information screen will not be displayed again by touching the "Do not display this message again" switch. 116 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 117
Sienna_Navi_U (L/O 0309) 1. Touch directly on the day you want to input a memo. L00186 2. Touch the "Memo" switch to display the "Memo" screen. 117 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 118
Sienna_Navi_U (L/O 0309) L00160 3. Touch keys directly to input a memo. You can input up to 24 letters. 118 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 119
You can input up to three memos a day. Select your desired date or mark color. If you want to default the date color you chose, touch the "Cancel" switch. After you select the date and/ or mark color, touch the "OK" switch to display the previous screen. 119 2004 SIENNA Navigation from Sep - 2004 Toyota Sienna | Navigation Manual - Page 120
. (See page 116 for the details.) L00160 If you want to look at the memo you input, touch the "List" switch to display the "Memo list". L00154 Touch your desired search condition to list the memo. The memo list is displayed on the screen. 120 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 121
on the display. To remove the colors, touch the "Yes" switch. To allow the colors to remain, touch the "No" switch. L00186 To edit: Touch the "Edit" switch. (See page 120 for details.) To delete: Touch the "Delete" switch. (See page 120 for details.) 121 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 122
Sienna_Navi_U (L/O 0309) SECTION OTHER FUNCTIONS IV Screen adjustment ...123 Screen transition ...124 122 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 123
becomes strong. You can adjust the brightness and contrast with exterior light on or off individually. 3. After adjusting the brightness and contrast, touch the Touching the "SCREEN turns the screen off. "OK" switch. OFF" switch 123 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 124
screen is set in the day mode with the headlight switch turned to on, this condition is memorized in the system even with the engine turned off. 1. Push the "INFO" button to display the "Information Menu" screen. Touch "Screen Transition". 124 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 125
Sienna_Navi_U (L/O 0309) NZN045 2. Select ON: "ON" or "OFF" and then touch "OK" . The previous screen automatically returns from the audio screen 20 seconds after the end of audio operation. OFF: The audio screen remains on. 125 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 126
Sienna_Navi_U (L/O 0309) 126 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 127
Sienna_Navi_U (L/O 0309) SECTION AUDIO SYSTEM Quick reference for your audio system ...Your audio system ...Using your audio system ...Audio remote controls ...Car audio system operating hints ... V 128 129 130 164 168 127 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 128
Sienna_Navi_U (L/O 0309) Quick reference for your audio system Function switch display screen "PWR·VOL" knob Push this knob to turn the audio system on and off, and turn it to adjust information regularly. For details, see page 138. 128 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 129
while the display is moving. Otherwise, you could be injured. NOTICE Do not obstruct the display while it is moving. It could damage your audio system. 129 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 130
basic features of the Toyota audio system. Some information may not pertain to your system. Your audio system works when the ignition switch is in the "ACC" or "ON" position. L00166 NOTICE To prevent the battery from being discharged, do not leave the car audio on longer than necessary when the - 2004 Toyota Sienna | Navigation Manual - Page 131
, compact disc player and DVD player operation are displayed on the function switch display screen when the audio control mode is selected. Touch the switches lightly and directly on the screen. The selected green. switch is highlighted in 131 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 132
between the left and right, touch the "L" or "R" switch on the screen. BASS: Adjusts low- pitched tones. MID: Adjusts mid- pitched tones. TREB: Adjusts high- pitched tones. As the orange display goes up, each tone is more emphasized. 132 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 133
sure it is removed before driving your Toyota through an automatic car wash. z On- glass antenna (built- in on the rear window glass): Attaching the film (especially conductive or metallic type) on the rear glass will noticeably reduce the sensitivity of the radio. NOTICE Do not oil any part of the - 2004 Toyota Sienna | Navigation Manual - Page 134
the sound of the rear seat entertainment system by pushing the "DISC" button. or counterclockwise to step down. Your radio automatically changes to stereo reception when a stereo broadcast is switches from stereo to mono reception. In this case, "ST" disappears from the screen. 134 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 135
appears on the switch Each radio mode (AM, FM1 or FM2) can store up to 6 stations. To change the preset station to a different one, follow the same procedure. The preset station memory is cancelled when the power source is interrupted by battery disconnection or a blown fuse. (c) Selecting a station - 2004 Toyota Sienna | Navigation Manual - Page 136
time, "FM TYPE" will appear on the screen to indicate that the station selector switches are for program type. After searching for all the available switch. If more than 6 stations are found, the radio will load the 6 strongest stations signal of the program type into the presets. 136 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 137
This switch is used for changing the program type (PTY) of RDS stations in all RDS mode. 8 program types are available as listed here. The following program type names are available. D D D D D D D D ROCK EASY LIS CLS/JAZZ R & B INFORM RELIGION MISC ALERT (Emergency message) 137 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 138
to the right and lightly push it in. L00179 braking or in an accident. D To reduce the chance of injury in case of an accident or sudden stop while driving, keep the display closed. D Take care not to jam your hand while the display is moving. Otherwise, you could be injured. 138 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 139
Sienna_Navi_U (L/O 0309) NOTICE Do not obstruct the display while it is moving. It could damage your audio system. To stop and eject the cassette tape, push the "OPEN" button to lower the display. Push the "TAPE " button. L00173 139 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 140
, touch the same switch or push the "TAPE" button. Auto- reverse feature: After the cassette player reaches the end of a tape, it automatically reverses and begins to play the other side, regardless of whether the cassette was playing or fast forwarding. 140 2004 SIENNA Navigation from Sep - 2004 Toyota Sienna | Navigation Manual - Page 141
least 3 seconds of blank space between programs for the repeat feature to work correctly. "SKIP" switch: The skip feature allows you to fast forward past long stretches of blank tape. This is reverses sides and resumes normal play. 141 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 142
damage your audio system. CAUTION L00174 D braking or in an accident. D To reduce the chance of injury in case of an accident or sudden stop while driving, keep the display closed. D Take care not to jam your hand while the display is moving. Otherwise, you could be injured. 142 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 143
following products may not be playable on your compact disc player. Copy- protected CD CD- R (CD- Recordable) CD- RW (CD- Re- writable) CD- ROM 143 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 144
, the player will start playing the selected track from the beginning. " switch and Fast forward: Touch the " hold it to fast forward the disc. When you release the switch, the compact disc player will resume playing from that position. 144 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 145
disc is O.K., the temperature of the player's internal mechanism may be raised because of high external temperature. Remove the disc from the player to cool it. If the player still does not operate, have it checked by your Toyota dealer. 145 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 146
appropriate discs for this player, see "Car audio system operating hints" on page 168. NOTICE Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. (b) Ejecting a disc Push the " " button. 146 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 147
(If the CD player is turned on, push the "DISC" button again to switch to the DVD player.) CD text only-The disc title and track title will " switch and hold it to fast forward the disc. When you release the switch, the player will resume playing from that position. 147 2004 SIENNA Navigation - 2004 Toyota Sienna | Navigation Manual - Page 148
will automatically go back to the beginning of the track and play the track again. To cancel it, touch the switch once again. "RAND" switch: Use it switch is touched, the system selects a track in the disc you are currently listening to. To cancel it, touch the switch once again. 148 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 149
is playing, playback will stop or the menu screen will be displayed. The title/chapter number and playback time display may not appear while playing back certain DVD video discs. 149 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 150
Push the "AUDIO" button to display this screen. It you touch the "PICTURE" switch when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING DVD CONTROLS If you touch a part of the screen, where controls are not located while you are watching video - 2004 Toyota Sienna | Navigation Manual - Page 151
DVD video appears. (For the operation, see the manual that come with the DVD video disc provided separately pause. "" ": Touching this switch will resume normal play after changing screen appears. (See page 154.) "Sub Title": The subtitle changing 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 152
appear on the screen. Push the "Enter" switch. The player starts playing the disc from the entered group number. When you push either side of the "TRACK ƜƝ " button, you can select a group. When you touch "BACK", the previous screen returns. 152 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 153
and push the "Enter" switch. The "Enter Key Code" CHANGING THE SUBTITLE LANGUAGE Each time you touch "Sub Title", the language is selected from the ones stored in the discs and changed. To turn off the subtitle, touch "Hide". When you touch "Back", the previous screen returns. 153 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 154
ANGLE The angle can be selected for discs that are multi- angle compatible when the angle mark appears on the screen. Each time you angle changes. touch "Angle", the When you touch "Back", and the previous screen returns. DVD audio 154 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 155
menus are initialized. The initial setting can be changed. Setup Menu 1 screen D Audio language You can change the audio language. Setup Menu 2 screen 1. Touch "Audio Lang." 2. Touch the language you want to hear on the "Select Audio Lang." screen. 155 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 156
screen turns on or off alternately. To return to the "Setup Menu 1" screen, push the "Back" switch. D Parental The level of viewer restrictions can be changed. 1. Touch "Parental". 2. to the "Setup Menu 1" screen, push the "Back" switch. 156 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 157
Level". Push the "Back" switch to return to the "Setup Menu 1" screen. Each time you touch the "Display Mode" on the "Setup Menu 2" screen, the display mode is changed from wide mode to auto German 0920 0519 2608 Italian Spanish Chinese 157 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 158
1101 1111 1112 Scots-Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Hebrew Yiddish Javanese Georgian Kazakh Greenlandic 158 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 159
2012 2014 2015 2018 Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish 159 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 160
. DISPLAYING OPERATION SWITCHES If you touch the part where switches are not located while you are watching video on the video CD, video CD operation switches will appear. "Second Page" switch: Use this switch to display the operation switches on the second page. 160 2004 SIENNA Navigation from - 2004 Toyota Sienna | Navigation Manual - Page 161
searched and played. "D. Menu Next" switch: When you touch this switch while the disc menu is displayed, the next page appears on the display. If you touch this switch while the player is playing video, the next track is searched and played. 161 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 162
the number of language subtitles. Indicates the number of angles. Indicates the screen to be selected. Wide screen: 16:9 Standard: 4:3 Indicates a region code by which this video disc can be played. ALL: in all countries Number: region code 162 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U - 2004 Toyota Sienna | Navigation Manual - Page 163
which the volume of data assigned to the picture is changed depending on the picture format has also been adopted. Audio Video and audio programs stored in DVD video disc are divided in parts by title and chapter. Title: The largest unit of the Systems, Inc. 163 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 164
Sienna_Navi_U (L/O 0309) Audio remote controls 164 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 165
Sienna_Navi_U (L/O 0309) Some parts of the audio system can be adjusted with the button on the steering wheel. Details of the specific buttons, controls, and features are described below. 1. Volume control button 2. " ƜƝ " button 3. "MODE" button Ny5001 165 2004 SIENNA Navigation from Sep. '03 - 2004 Toyota Sienna | Navigation Manual - Page 166
to find the next station. If you push the switch on either side during the seek mode, seeking will be cancelled. Cassette tape player This switch has the following features- To skip to a different automatically start playing that side. 166 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 167
in either direction. Quickly push and release the " Ɯ " or " Ɲ " side of the switch until the track you want to listen to is set. If you want to return to the beginning of the current track, push the " Ɲ " side of the switch once, quickly. 167 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 168
reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception. 168 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 169
alternately tape head and other parts regularly. D A dirty air conditioning to cool the vehicle interior before you use the players. D Low- quality cassette tapes can cause many problems appear to be working. Remove the disc from the player 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 170
not be playable on your compact disc player. SACD dts- CD Copy- protected CD CD- R (CD- Recordable) CD- RW (CD- Re- writable) CD- ROM 170 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 171
player or changer, do not use special shaped, low quality or labeled discs such as those shown in the illustrations. Z17039 Low quality discs 171 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 172
of a track. (To see a pin hole, hold the disc up to the light.) To clean a disc: Wipe it with a soft, lintfree cloth that has been dampened Remove discs from the players when you are not using them. Store them in their plastic cases away from moisture, heat, and direct sunlight. 172 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 173
Sienna_Navi_U (L/O 0309) 173 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 174
on the limitations of the system, refer to pages 59 through 61. E 2003 TOYOTA MOTOR CORPORATION All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota Motor Corporation. i 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 175
the instructions. NOTICE This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your vehicle and its equipment. ii 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 176
Sienna_Navi_U (L/O 0309) When you touch the "I agree" switch on the screen, the "map" screen appears. You can access this screen when you push the "INFO" button and touch the "Language" switch. Then you can select a language. iii 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 177
. Do not allow others to use this system until they have read and understood these and other instructions in this manual. For your safety, some functions may become inoperable when you start driving. Unavailable switches are dimmed. You can input your destination and select your route only when - 2004 Toyota Sienna | Navigation Manual - Page 178
etc.) frequently change. Therefore, before you follow any instruction from the system, look to see whether you can comply with the instruction safely and legally. This system cannot warn you about such things as the safety of an area, condition of streets, and availability of emergency services. If - 2004 Toyota Sienna | Navigation Manual - Page 179
Sienna_Navi_U (L/O 0309) vi 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 180
touch it again. D You cannot switches. operate dimmed D Wipe off fingerprints on the surface of the display using a glass cleaning cloth. D The displayed image may become darker and moving images may be slightly distorted when the display is cold. vii 2004 SIENNA Navigation from Sep. '03 Prod - 2004 Toyota Sienna | Navigation Manual - Page 181
the display. For details, see page 2. DISPLAY button Current street name Turn on this function to indicate the current street name. For details, see page 108. Push this button to display the "Display" screen. For details, see page 123. viii 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 182
the route guidance When you touch this switch, the "Change route" screen will appear. For details, see page 49. One- touch registration of marked point To and hotels, etc. can be displayed on the screen. For details, see page 51. ix 2004 SIENNA Navigation from Sep. '03 Prod. (OM45414U) - 2004 Toyota Sienna | Navigation Manual - Page 183
04 SIENNA_U (L/O 0408) SECTION Overview of instruments and controls 1- 1 OPERATION OF INSTRUMENTS AND CONTROLS Instrument panel overview ...2 Instrument cluster overview ...5 Indicator symbols on the instrument panel ...6 1 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 184
10. Electric moon roof switch 11. Auxiliary boxes 12. Glove box 13. Power window switches 14. Power door lock switches 15. Automatic transmission selector lever 16. Audio remote control switches 17. Hood lock release lever 18. Parking brake pedal 19. Window lock switch 2 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 185
rear view mirror defogger and windshield wiper de- icer switch 4. Emergency flasher switch 5. Car audio 6. Power outlet main switch 7. Engine immobilizer/theft deterrent system indicator light 8. Air conditioning controls 9. Seat heater switches or auxiliary box 10. Auxiliary box 11. Cup holder - 2004 Toyota Sienna | Navigation Manual - Page 186
warning system reset switch 20. Power sliding door main switch ("SLIDE DOOR OFF" switch) 21. Power back door main switch ("BACK DOOR OFF" switch) 22. Power rear view mirror control switches 23. Power quarter window switch ("REAR VENT" switch) 24. Headlight beam level control dial 4 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 187
gauge 4. Low fuel level warning light 5. Fuel gauge 6. Dynamic laser cruise control master warning light 7. Dynamic laser cruise control display 8. Trip meter reset knob/instrument panel light control knob 9. Odometer and two trip meters 10. Tachometer 5 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 188
/traction control system warning light∗1 Low tire pressure warning light∗1 or Malfunction indicator lamp∗1 Low windshield washer fluid level warning light∗1 Low engine oil pressure warning light∗1 Engine oil replacement reminder light∗1 (for vehicles sold in U.S.A.) 6 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 189
Slip indicator light Traction control system off indicator light (two- wheel drive models) Cruise control indicator light∗2 or dynamic laser cruise control indicator light∗3 Dynamic laser cruise control ready mode indicator light Conventional cruise control mode indicator light 7 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 190
04 SIENNA_U (L/O 0408) 8 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 191
Wireless remote control ...Front doors ...Sliding doors ...Power sliding doors ...Back door ...Power back door ...Power windows ...Manual quarter windows ...Power quarter windows ...Hood ...Theft deterrent system ...Fuel tank cap ...Electric moon roof ... 9 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 192
sub key with the attendant. Since the front doors and sliding doors can be locked without a key, you should always system to function correctly, so be careful not to lose these keys. If you make your own duplicate key, you will not be able to cancel the system or start the engine. 10 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 193
the attendant. Since the front doors and sliding doors can be locked without a remove the key once and then insert it again after removing other transponder keys (including keys of other vehicles) from the ring or while gripping or covering them with your hand to start the engine. 11 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 194
04 SIENNA_U (L/O 0408) z Do not cover the key grip with any material that cuts off electromagnetic waves. z Do not knock the key hard against other recommend writing down the key number and storing it in a safe place. z Do not bend the key grip. 12 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 195
when the theft deterrent system is setting or activating. (See "Theft deterrent system" on page 48 in this Section.) D The indicator light does not start flashing when the key is removed from the ignition switch. D The indicator light flashes inconsistently. 13 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 196
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Unlocking operation (type A) 14 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 197
doors or back door is not securely closed, or if the key is in the ignition switch, locking cannot be performed by the " " (lock) switch and a beep will sound continuously for 10 seconds. However, if the key is in the ignition, a beep will not sound. Unlocking operation (type B) 15 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 198
The power sliding door opens and closes completely. Right side power sliding door- To open: Push the " To close: Push the " " switch. " switch again. D Cancelling the flash of the turn signal lights D Cancelling the beep sound Right side power sliding door (type B) 16 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 199
sliding door system is on. (The "SLIDE DOOR OFF" switch on the instrument panel is pushed out.) D The key is not in the ignition switch. D The sliding door is between the fullyopened position and half- opened position. The sliding door operation by the wireless remote control can be changed or - 2004 Toyota Sienna | Navigation Manual - Page 200
the front personal lights. " (panic) switch is used to deter The " vehicle theft when you witness anyone attempting to break into or damage your vehicle. D The key is not in the ignition switch. D The back door is between the fullyclosed position and half- opened position. 18 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 201
information. If the wireless remote control transmitter does not actuate the doors or alarm, or operate from a normal distance: MADE IN U.S.A. This complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and - 2004 Toyota Sienna | Navigation Manual - Page 202
. z Dispose of used batteries according to the local laws. Replace the transmitter battery by following these procedures: 1. Using a coin or equivalent, open the transmitter case. 2. Remove the discharged transmitter battery. NOTICE Do not bend the terminals. 20 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 203
to unlock all the side doors and back door can be changed to a single key turning operation. For details, contact your Toyota dealer. NOTICE z Make sure the positive side and negative side of the transmitter battery are faced correctly. z Do not replace the battery with wet hands. Water may - 2004 Toyota Sienna | Navigation Manual - Page 204
Push the knob forward. To unlock: Pull the knob backward. The front doors can be opened by pulling the inside handles even if the lock knobs are in the locked position. WITH The front doors cannot be locked if you leave the key in the ignition switch. 22 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 205
remote control transmitter when all the side doors and back door are closed. D Open the driver's door or front passenger's door and move the inside lock knobs of both front doors to the lock position, then close the front doors. Front passenger's side 23 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 206
rear of the driver's side power door lock switch for 5 seconds with the selector lever in the "P" position. D To set function (c) Push and hold the front of the driver's side power door lock switch for 5 seconds with the selector lever in any position except "P". 24 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 207
from the sliding door. Otherwise, the closing door may cause an unexpected serious injury. D When the vehicle is stopped on a slope, the door will slide faster when opening or closing, so be especially careful that the passengers do not get hit or pinched by the door. 25 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 208
left side sliding door fully when the fuel filler door is opened. Otherwise, the fuel filler door may be damaged. CAUTION Do not leave the sliding door at halfopened position. If the vehicle is stopped on a downward slope, it may move and cause an unexpected injury. 26 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 209
on the top of the switch indicates that the power sliding door system is on.) To disable the power sliding door feature, push in the switch. D When jacking up the vehicle, turn off the power sliding door system and close the sliding door completely. 27 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 210
(L/O 0408) -Manual operation NOTICE When your vehicle goes through an automatic car wash, make sure the power sliding door system is off. CLOSING THE FULLY- OPENED SLIDING DOOR To close the fully- opened sliding door, pull the inside or outside handle and then close the door. CAUTION Before - 2004 Toyota Sienna | Navigation Manual - Page 211
from the sliding door. Otherwise, the closing door may cause an unexpected serious injury. D When the vehicle is stopped on a slope, the door will slide faster when opening or closing, so be especially careful that the passengers do not get hit or pinched by the door. 29 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 212
. Otherwise, the fuel filler door may be damaged. CAUTION Do not leave the sliding door at halfopened position because the door will unlock after 30 minutes. If the vehicle is stopped on a downward slope, it may move and cause an unexpected injury. 30 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 213
remote control transmitter D Assists operation with the outside or inside handle by hand The power sliding door system can be canceled by the "SLIDE DOOR OFF" switch. SLIDING DOOR CHILD- PROTECTORS Open the sliding door fully and move the lock lever to the "LOCK" position as shown on the label - 2004 Toyota Sienna | Navigation Manual - Page 214
performed by the switches under the following conditions: D The sliding door is unlocked. D The power sliding door system is on. (The "SLIDE DOOR OFF" switch is pushed out.) D The sliding door is between the fullyCenter pillar closed position and half- opened position. 32 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 215
and right side power sliding door models-The left side power sliding door does not operate when the fuel filler door is opened. The length of time required to push the switches for operating the sliding door can be changed. For details, contact your Toyota dealer. 33 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 216
: NOTICE Objects caught in the path of the sliding door may be damaged. Make sure there is nothing in the doorway before closing the sliding door. D Never try jamming any part of your body to make the jam protection function work intentionally. 34 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 217
or recharge the battery. Be careful not to lock your keys in the vehicle. D Operate the power door lock switch. (See "Front doors" on page 21 in this Section.) D Operate the wireless remote control. (See "Wireless remote control" on page 14 in this Section.) 35 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 218
back door system. In order to operate the power back door, the "BACK DOOR OFF" switch on the instrument panel must be pushed out. (The orange line on the top of the switch indicates that the power back door system is on.) To disable the power back door feature, push in the switch. 36 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 219
switch light" on page 158 in Section 1- 4.) If the back door opener does not operate, see "If you cannot operate back door opener" on page 430 in Section 4. If the battery is disconnected or run down, the back door will be automatically locked after you reconnect, replace or recharge the battery - 2004 Toyota Sienna | Navigation Manual - Page 220
the vehicle. Back door closer: When the back door has not been fully closed, it is automatically closed completely even if the power back door system is off force when the back door closer is operating. Otherwise, the back door closer may be damaged. 38 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 221
D Assists closing by hand The power back door system can be canceled by the "BACK DOOR OFF" switch. When closing or opening the back door automatically, two beeps will be heard and the turn signal lights will flash twice. The beep sound can be changed. For details, contact your Toyota dealer - 2004 Toyota Sienna | Navigation Manual - Page 222
The power back door system is on. (The "BACK DOOR OFF" pushed out.) switch is D The back door is between in the fullyopened position and half- opened position. The time of pushing the switches for operating the back door can be changed. For details, contact your Toyota dealer. 40 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 223
you close the power back door, always make sure there is nobody around it. If someone's neck, head or hands get caught in a closing door, it could result in a serious injury. When anyone closes the power back door, make sure he or she operates the door safely. 41 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 224
the power back door system may not work after you reconnect, replace or recharge the battery. In any of these cases, normalize the power back door system by following procedure. 1. Unlock the back door with the key, remote control transmitter or power door lock switch. 2. Close the back door hand - 2004 Toyota Sienna | Navigation Manual - Page 225
open or close. To stop the window partway, lightly move the switch in the opposite direction and then release it. Type A (to open only) If the battery is disconnected or run down, the power window may if nothing is caught. Type B (to open and close) 43 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 226
04 SIENNA_U (L/O 0408) CAUTION Window lock switch D Never try jamming any part of your body to activate the jam protection function intentionally. D The jam protection function may not work if something gets caught just before the window is fully closed. 44 2004 SIENNA from Aug. '04 Prod. ( - 2004 Toyota Sienna | Navigation Manual - Page 227
to remove the ignition key when you leave your vehicle. Use the switch on each passenger's door or the switches on the driver's door that power window switches without supervision. Use the window lock switch to prevent them from making unexpected use of the switches. 45 2004 SIENNA from Aug. - 2004 Toyota Sienna | Navigation Manual - Page 228
side. To close: Push the switch on the lower side. Both the left and right rear quarter windows move as long as you hold the switch. D When small children are in the vehicle, never let them use the power quarter window switches without supervision. 46 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 229
the vehicle, especially with the ignition key still inserted. They could use the power quarter window switch and get trapped in a window. Unattended children can be involved in serious accidents. To open while driving and an accident may occur. 47 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 230
, back door or hood is forcibly unlocked or opened or the battery terminal is disconnected and then reconnected when the vehicle is locked. The alarm blows the horn intermittently and flashes the headlights, tail lights and turn signal lights, and turns on the front personal lights. 48 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 231
key is removed from the ignition switch. (See "Engine immobilizer system" on page 13 in this Section for details.) 2. Have all passengers get out of the vehicle. 3. Close and lock all the side doors, back door and hood. The indicator light will remain on when all the side doors, back door and hood - 2004 Toyota Sienna | Navigation Manual - Page 232
of the side doors or the back door with the key or wireless remote control transmitter. D Turn the ignition key from the "LOCK" to "ON" position. These ways cancel the system at the same time. This indicates that the fuel filler door is on the left side of your vehicle. 50 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 233
cause sparks or allow open flames when refueling. The fumes are flammable. D When opening the cap, do not remove the cap quickly. In hot weather, fuel under pressure could cause injury by spraying out of the filler neck if the cap is suddenly removed. 51 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 234
in the receptacle on the back side of the door. D Make sure the cap is installed securely to prevent fuel spillage in the event of an accident. D Use only a genuine Toyota fuel tank cap for replacement. It is designed to regulate fuel tank pressure. 52 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 235
. To stop the roof partway, push the switch on either the "SLIDE OPEN" or "TILT UP" side quickly. When you quickly push and release the switch, the moon roof will tilt down while the switch is being pushed and stop when released. Sliding operation 53 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 236
, replace or recharge the battery. In any of these cases, you should normalize the moon roof. To normalize the moon roof, push and hold the switch on must also make sure nobody places his or her head, hands and other parts of the body in the roof opening. If someone's neck, head or hands get caught - 2004 Toyota Sienna | Navigation Manual - Page 237
seats ...56 Rear seats ...62 Head restraints ...93 Armrests ...93 Seat heaters ...94 Seat belts ...95 SRS driver airbag and front passenger airbag ...106 SRS side airbags and curtain shield - glare inside rear view mirror ...146 Vanity mirrors ...147 55 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 238
back in the seat and properly wear the seat belts provided. Front seats- -Front seat precautions Driver seat D Slightly recline the back you can change your driving braking or a collision. D Move your seat to the rear as far as you can while still reaching the pedals comfortably. 56 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 239
cover the area where the side airbags inflate. Such accessories may prevent the side airbags from activating correctly, causing death or serious injury. D After adjusting the seatback, push your body back against the seat to make sure the seat is locked in position. D Do not modify or replace - 2004 Toyota Sienna | Navigation Manual - Page 240
position with slight body pressure and release the lever. 2. SEAT HEIGHT ADJUSTING KNOB To change the seat height, turn the knob either way. 3. SEATBACK LEVER ANGLE ADJUSTING Lean forward and pull the lever up. Then lean back to the desired angle and release the lever. 58 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 241
straight and well back in the seats. If you are reclined, the lap belt may slide SWITCH ANGLE ADJUSTING Move the control switch in the desired direction. Releasing the switch will stop the seatback at that position. To change the amount of lumber support, turn the knob either way. 59 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 242
directly to the abdomen or your neck may contact the shoulder belt. In the event of a frontal collision, the more the seat is reclined, the greater the risk of death or personal injury. To change the amount of lumber support, turn the knob either way. 60 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 243
. 1. Pull the seatback angle adjusting lever and raise the seatback to its upright position. 2. Pull the seatback folding lever and fold the seatback down. 61 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 244
seatback, push You can use the seatback as a temporary table only when the vehicle is stopped. back your body to make sure it is locked in position. CAUTION To avoid serious injury: D Do not set up position when you set the seat as a temporary table. 62 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 245
edge of the bottom cushion. Failure to do so will prevent the seat belt from operating properly. Make sure the seat belts are not twisted or caught under the seat and are arranged in their for precautions when loading luggage. Outer seat Center seat 63 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 246
with slight body pressure and release the back in the seats. If you are reclined, the lap belt may slide past your hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt back by pulling the lever or strap. 64 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 247
to pull up the edge of the bottom cushion. Failure to do so will prevent seat belt from operating properly. When returning the tumbled seat to its original position: second Once the seat . (It is possible to operate the seat in the order 1→2→3→1.) 65 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 248
up. Then slide the seat to the rear- most lock position. CAUTION NOTICE To prevent damage to the seat belt buckles, the buckles must be stowed before you fold the seatback. The seat belt must be removed from the hanger when the seat belt is in use. 66 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 249
strap must be stowed into the pocket when it is not in use. D To avoid serious injury, do not sit on the folded seatback. 67 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 250
holding strap. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. D Do not set up the seatback table while the vehicle is moving. D Do avoid putting heavy loads on the temporary table. 68 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 251
operate the seat in the order 1→2→3→1.) D Do not fold or remove the seat while the vehicle is moving. D Be careful not belt from operating properly. D Make sure the seat belts are not twisted or caught in the seatback and are arranged in their proper position and are ready to use. 69 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 252
rear leg will not unlock. In this case, slide the seat to the rear- most lock position and then do the above operation again. 70 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 253
holding strap. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. D To avoid serious injury, do not sit on the folded seatback. D Do not stowed into the pocket when it is not in use. 71 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 254
precautions in order to prevent personal injury: D Do not fold or remove the seat while the vehicle is moving. D Be careful not to get sure the seat belts are not twisted or caught in the seatback and are arranged in their proper position and are ready to use. 72 2004 SIENNA from Aug. ' - 2004 Toyota Sienna | Navigation Manual - Page 255
up. Then slide the seat to the rear- most lock position. CAUTION NOTICE To prevent damage to the seat belt buckles, the buckles must be stowed before you fold the seatback. The seat belt must be removed from the hanger when the seat belt is in use. 73 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 256
strap and fold down the seat. Then the front leg locks will disengage and you can remove the seat. CAUTION CAUTION D Make sure the seat is free of people or luggage. Then Be careful not to hit the removed seat against a person or drop it on yourself. 74 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 257
seat with holding the seat position adjusting lever. Otherwise, the seat may slide and not installed properly. If you slide the removed seat, return the seat to the rear- most position before it is installed. 7- passenger models 8- passenger models 75 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 258
. Failure to be properly restrained with the seat belt in an accident can cause death or serious injury. Refer to the label on the side of the seat for additional installation instructions. 1. Align the front leg hooks with the rear strikers in the floor. Then swing up the seat. 2. Make sure the - 2004 Toyota Sienna | Navigation Manual - Page 259
strikers, the bezel in the floor will be damaged. If you lock the rear legs before the front legs are locked securely, disengage the rear leg lock by pushing the red pin inside each rear leg. Then reinstall the seat following the correct procedure. 77 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 260
not to get your hands or feet pinched in the seat. D Be careful not to hit the removed seat against a person or drop it on yourself. D After folding or installing the seat, push it Failure to do so will prevent the seat belt from operating properly. 78 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 261
position. NOTICE Do not carry the removed seat by holding the seat position adjusting lever. Otherwise, the seat may slide and not be installed properly. If you slide the removed seat, return the seat to the rear- most position before it is installed. 79 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 262
04 SIENNA_U (L/O 0408) -Removing second seat (center seat) REMOVING CENTER SECOND SEAT 1. Lower the head restraint to the lowest position. Hold the center of the slide the seat to the rear- most lock position and then do the above operation again. 80 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 263
luggage may be damaged if the seat hits them. D Do not fold or remove the seat while the vehicle is moving. D To avoid serious injury, do not Do not leave the removed seat loose in the vehicle. D Do not try to sit on or place anything on the removed seat. 81 2004 SIENNA from Aug. '04 Prod. - 2004 Toyota Sienna | Navigation Manual - Page 264
belt in an accident can cause death or serious injury. Refer to the label on the side of the seat for additional installation instructions. NOTICE You must install the seat in its original position. If it is installed in the wrong position, the seat lock or bezel will be damaged. 82 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 265
rear leg lock. You can easily align the front leg hooks with the rear strikers by using the floor bezel. Put the front legs of the seat short of the rear strikers as shown in the illustration. the front legs align with the striker, swing up the seat. 83 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 266
front strikers, the bezel in the floor will be damaged. If you lock the rear legs before the front legs are not lock securely, disengage the rear leg lock by pulling the rear leg release lever. Then reinstall the seat following the correct procedure. 84 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 267
to the upright position. 2. For vehicles equipped with the front seat side table, pull up the lock release lever and fold the table down. 85 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 268
seat from the normal position. (For details, see "-Removing second seat (center seat)" on page 80 in this Section.) Align the front leg hook with the rear striker of the forward pair. Then swing the seat until it reaches the folded seat side table. 86 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 269
removed seat by holding the seat position adjusting lever. D Make sure the seat is securely locked by pushing forward and rearward on the top of the seatback or by trying to pull up the edge of the bottom cushion. Failure to do so will prevent the seat belt from operating properly. 87 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 270
out of its cover. It will automatically roll back partway. Roll the seat belt backwards as shown above and insert it into the slot of its cover. Make sure the tabs are securely locked in the cover. NOTICE The seat belt must be stowed before you fold the seatback. 88 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 271
04 SIENNA_U (L/O 0408) STOWING THIRD SEATS 1. Lower the head restraint to the lowest position. 2. Pull the seatback angle adjusting strap ("TO FOLD/LIFT SEATBACK" printed on its surface), then fold down the seatback. 89 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 272
on the seatback angle adjusting strap ("TO FOLD/ LIFT SEATBACK" printed on its surface). Then push the seatback down again. 4. Push the seat against the floor and make sure it is locked securely. 90 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 273
). Then push the seatback down again. 2. Pull the seatback angle adjusting strap ("TO FOLD/LIFT SEATBACK" printed on its surface) and raise the seatback. 91 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 274
cushion. Failure to do so will prevent the seat belt from operating properly. D Make sure the seat is braking or collision. when you are inside the vehicle in order to prevent pinching your hands or feet in the seat. Be sure to stow and return the seats from outside the vehicle. 92 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 275
, avoid putting heavy loads on it. D After adjusting the head restraint, make sure it is locked in position. D Do not drive with the head restraints removed. Third seats 93 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 276
(sleeping drug, cold remedy, etc.) To prevent the seat from overheating, do not use the seat heater with a blanket, cushion, or other insulating objects which cover the seat. 94 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 277
to damage the belt webbing or hardware. Take care that they do not get caught or pinched in the seat or doors. D Inspect the belt system periodically. Check for cuts, fraying, and loose parts. Damaged parts should be replaced. Do not disassemble or modify the system. 95 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 278
you from properly latching the tab and buckle. D If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed. It cannot protect an adult occupant or your child from injury. 96 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 279
adjustment make sure the anchor is locked in position. CAUTION Always wear the belt with the shoulder portion over the outside armrest and the lap portion under the outside armrest. Failure to do so may increase the chance of injury in an accident. 97 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 280
portion upward through the latch To release the belt, press the buckle- release button and allow the belt to retract. If the belt does not retract smoothly, pull it out and check for kinks or twists. Then make sure it remains untwisted as it retracts. 98 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 281
. Two buckles and tabs for center seat belt of the third seats The 2 tabs have different shape for its end so that the belt is not buckled in the wrong place. Buckle 1-Properly matches with hooked end tab Buckle 2-Properly matches with round end tab 99 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 282
. Second (7- passenger models) CAUTION Do not use the center seat belt of the third seats with either buckle released. Fastening only the shoulder belt or lap belt may cause serious personal injury in case of a sudden braking or a collision. Third 100 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 283
(2) out from the cover. If the seat belt cannot be pulled out of the retractor, firmly pull the belt and release it. You will then be able to smoothly pull the belt out of the retractor. NOTICE Stow the center seat belt of the third seats except when you are wearing it. 101 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 284
. Be sure to wear the seat belt with the seat belt extender. D Remember that the extender provided for you may not be safe when used on a different vehicle, for another person, or at a different seating position than the one originally intended. 102 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 285
When the shoulder belt is inserted through the guide, the comfort guide pulls the belt away from the neck and head of an occupant. For wearing the seat belt, see "-Front and rear seat belts" on page 96 in this Section. Make sure the shoulder belt crosses the shoulder. 103 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 286
sensors, driver's seat position sensor, driver's seat belt buckle switch, front seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring and power sources. (For details, see "Service reminder indicators and warning buzzers" on page 167 in Section 1- 5.) 104 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 287
instructions can result in death or serious injuries. Consult your Toyota dealer about any repairs and modifications. The front seat belt pretensioner system mainly consists of the following components and their locations are shown in the illustration. 1. Front airbag sensors 2. SRS warning light - 2004 Toyota Sienna | Navigation Manual - Page 288
) SRS driver airbag and front passenger airbag This front seat belt pretensioner system has a service reminder indicator to inform the driver of operating problems. If any of the following conditions occurs, this indicates a malfunction of the airbags or pretensioners. Contact your Toyota dealer - 2004 Toyota Sienna | Navigation Manual - Page 289
shield airbag sensors, curtain shield airbag sensors, driver's seat position sensor, driver's seat belt buckle switch, front seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring and power sources. (For details, see "Service reminder indicators and warning buzzers - 2004 Toyota Sienna | Navigation Manual - Page 290
, the SRS front airbags and the seat belt pretensioners may not activate together. For the safety of all occupants, always wear your seat belts properly. Collision from the rear Hitting a curb vehicle. Some examples are shown in the illustration. 108 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 291
airbag system mainly consists of the following components, and their locations are shown in the illustration. 1. Front airbag sensors 2. SRS warning light 3. Airbag module for front passenger (airbag and inflator) 4. Driver's seat belt buckle switch 5. Driver's seat position sensor 6. Airbag sensor - 2004 Toyota Sienna | Navigation Manual - Page 292
the seat belt system, see "Seat belts" on page 95 in this Section. D Never install a rear- facing child restraint system on the front passenger seat because the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child. 110 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 293
in use, since the front airbags inflate with considerable speed and force. Otherwise you may be killed or seriously injured. Sit up straight and well back in the seat, and always use your seat belt properly. 111 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 294
wheel pad, steering wheel, column cover, dashboard near the front passenger airbag, front passenger airbag or airbag sensor assembly. Doing so may cause sudden SRS front airbag inflation or disable the system, which could result in death or serious injury. Failure to follow these instructions can - 2004 Toyota Sienna | Navigation Manual - Page 295
end z Repairs made on or near the front fenders, front end structure, console, steering column, steering wheel or dashboard near the front passenger airbag This SRS front airbag system has a service reminder indicator to inform the driver of operating problems. If either of the following conditions - 2004 Toyota Sienna | Navigation Manual - Page 296
are inflated. The SRS (Supplemental Restraint System) side airbags and curtain shield airbags are designed to provide further protection for the driver and all window- side passengers in addition to the primary safety protection provided by the seat belts. 114 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 297
shield airbag sensors, curtain shield airbag sensors, driver's seat position sensor, driver's seat belt buckle switch, front seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring and power sources. (For details, see "Service reminder indicators and warning buzzers - 2004 Toyota Sienna | Navigation Manual - Page 298
toxic gas. This does not indicate a fire. This gas is the system is light 2. Curtain shield airbag modules (airbag and inflator) 3. Side airbag modules (airbag and inflator) 4. Curtain shield airbag sensors 5. Side and curtain shield airbag sensors 6. Airbag sensor assembly 116 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 299
must wear their seat belts. Wearing a seat belt during an accident reduces the chances of death or serious injury or being thrown out of the vehicle. For instructions and precautions concerning the seat belt system, see "Seat belts" on page 95 in this Section. 117 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 300
not lean against the door when the vehicle is back in the seat, distributing your weight evenly in the seat. Do not apply excessive weight to the outer side of the front seats with a side airbag, and to the front pillar, rear pillar and roof side rail with a curtain shield airbag. 118 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 301
side door glass, front and side pillars, roof side and assist grips. When the curtain shield airbag inflates, the microphone or other device or object will be thrown with great force or the curtain shield airbag may not activate correctly, resulting in death or serious injury. 119 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 302
changes may disable the system or cause the side airbags to inflate accidentally, resulting in death or serious injury. This SRS side airbag and curtain shield airbag system has a service reminder indicator to inform the driver of operating problems. If either of the following conditions occurs - 2004 Toyota Sienna | Navigation Manual - Page 303
pillars and roof side rail garnishes (padding) containing the curtain shield airbags inside (shaded in the illustration) is scratched, cracked, or otherwise damaged. NOTICE Do not disconnect the battery cables before contacting your Toyota dealer. 121 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 304
install a rear- facing child restraint system on the front seat. In the event of an accident, the force of the rapid inflation of the airbag can cause death or serious injury if a rear- facing child restraint system is installed on the front seat. 122 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 305
sudden stop or accident. When not using the child restraint system, keep it secured with the seat belt or place it somewhere other than the passenger compartment. This will prevent it from injuring passengers in the event of a sudden stop or accident. 123 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 306
on the child's age and size. (A) Infant seat (B) Convertible seat (C) Booster seat Install the child restraint system following the instructions provided by its manufacturer. Your in this Section. (A) Infant seat (C) Booster seat (B) Convertible seat 124 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 307
belt (A) INFANT SEAT INSTALLATION An infant seat is used in rear- facing position only. CAUTION D Do not install a child restraint system braking or a collision. D Never install a rear- facing child restraint system system on the second right seat. 125 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 308
into the buckle taking care not to twist the belt. Keep the lap portion of the belt tight. normally, it cannot protect your child from injury. Contact your Toyota dealer immediately. Do not use the child restraint system until the seat belt is fixed. 126 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 309
seat firmly cushion and seatback, belt retract as far as the infant seat secure- CAUTION Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 127 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 310
. The belt will move freely again and be ready to work for an adult or older child passenger. (B) CONVERTIBLE SEAT INSTALLATION A convertible seat is used in forwardfacing or rear- facing position depending on the child's age and size. When installing, follow the manufacturer's instructions about - 2004 Toyota Sienna | Navigation Manual - Page 311
the child. Move seat fully back D A forward- facing child restraint system should be allowed to be installed braking or a collision. D If the driver's seat position does not allow sufficient space for safe installation, install the child restraint system on the second right seat. 129 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 312
into the buckle taking care not to twist the belt. Keep the lap portion of the belt tight. normally, it cannot protect your child from injury. Contact your Toyota dealer immediately. Do not use the child restraint system until the seat belt is fixed. 130 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 313
, let the shoulder belt retract as far as it will go to hold the convertible seat securely. CAUTION Push and pull the child restraint system in different directions to be sure it is secure. Follow all the installation instructions provided by its manufacturer. 131 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 314
the convertible seat, press the buckle- release button and allow the belt to retract completely. The belt will move freely again and be ready to work for an adult or older child passenger. (C) BOOSTER SEAT INSTALLATION A booster seat is used in forward- facing position only. 132 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 315
the buckle taking care not to twist the belt. Make sure the shoulder belt is correctly across the child's shoulder and that the lap belt is positioned as low as possible on the child's hips. See "Seat belts" on page 95 in this Section for details. 133 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 316
the tab, make sure the tab and buckle are locked and that the lap and shoulder portions of the belt are not twisted. D Do not insert coins, clips, etc. in the buckle as this may prevent your child from properly latching the tab and buckle. 134 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 317
back of the second seats to attach the top strap. Anchor bracket is installed for each second seating position. Anchor brackets Follow the procedure below for a child restraint system that requires the use of a top strap. 7- passenger models Anchor brackets 8- passenger models 135 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 318
the head restraint. CAUTION Make sure the top strap is securely latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. 136 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 319
for a child restraint system that requires the use of a top strap. Use the anchor brackets on the back of the third seats to attach the top strap. Anchor bracket is installed for right side and center seating position. TO USE THE ANCHORAGES: 1. Remove the head restraint. 137 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 320
page 121 in this Section. latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. 7- passenger models 8- passenger models 138 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 321
) by pushing downward on the back of the seat. Adjust the seatback to the 1st lock position (most upright position) and then to the 5th lock position. Make sure the locked securely. seat and seatback is Canada only Type A (anchor buttons) position indicated by 139 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 322
04 SIENNA_U (L/O 0408) Canada only Type A tags) (anchor position indicated by Type B (anchor buttons) Canada only position indicated by Type B tags) (anchor Canada only position indicated by 140 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 323
of the right and center seats. Child restraint systems complying with the FMVSS213 or CMVSS213 specification can be fixed to these anchorages. In this case, it is not necessary to fix the child restraint system with a seat belt on the vehicle. 141 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 324
RESTRAINT INSTALLATION SYSTEM 1. Fold down the seatback and back to the 1st lock position (most upright position) until it locks into place. Adjust the seatback to the 11th lock position. Make sure the seatback is locked securely. Canada only Type A Canada only Type B 142 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 325
this Section.) For installation details, refer to the instruction manual equipped with each product. CAUTION D When using the lower anchorages for the child restraint system, be sure that there are no irregular objects around the anchorages or that the seat belt is not caught. D Push and pull the - 2004 Toyota Sienna | Navigation Manual - Page 326
mirror" on page 146 in this Section.) On some models, when you push the rear window defogger switch, the heater panels in the outside rear view mirrors will quickly clear the mirror surface. (See hot, do not touch them when the defogger switch is on. 144 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 327
a mirror, use the switches. 1. Master switch-To select the mirror to be adjusted Push the switch to "L" (left) or "R" (right). 2. Control switch-To move the mirror Push the switch in the desired direction extended and properly adjusted before driving. 145 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 328
night driving. When the ignition key is inserted and turned on, the inside rear view mirror always turns on in the automatic function mode. The indicator illuminates to show you that the function is on. 146 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 329
and open the cover. On vehicles with the vanity lights, the light will come on when you open the cover. VANITY LIGHTS CUT OFF OPERATION When the ignition switch is turned off and vanity light stays lighting on, the light will cut off automatically after 20 minutes. 147 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 330
D Opening or closing any of front and sliding doors. D Turning off all the "ON" lights. All the lights are cut off when all the side doors and back door are locked by key or wireless remote control transmitter. The ignition switch must be turned off. 148 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 331
personal lights ...156 Rear personal lights ...157 Luggage compartment light ...158 Ignition switch light ...158 Windshield wipers and washer ...159 Rear window wiper and washer ...160 Rear window and outside rear view mirror defoggers and windshield wiper de- icer ...161 149 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 332
off system Position 1- The lights automatically turn off when the driver's door is opened with the ignition key in the "ACC" or "LOCK" position. NOTICE To prevent the battery from being discharged, do not leave the lights on for a long period when the engine is not running. 150 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 333
it by hand after you change lanes. To signal a lane change, move the lever up or down to the pressure point (position 2) and hold it. If the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. HEADLIGHTS To - 2004 Toyota Sienna | Navigation Manual - Page 334
brake is released. To turn off the DRL system, twist the knob to position 2 or position 3 with the headlights on, or turn the ignition switch off. NOTICE To prevent the battery from being discharged, do not leave the lights on for a long period when the engine is not running. 152 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 335
the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. To adjust the headlight beam level, turn the dial. The following list shows examples of proper switch settings. For loading conditions other than those - 2004 Toyota Sienna | Navigation Manual - Page 336
drivers if your vehicle must be stopped where it might be a traffic hazard. Always pull as far off the road as possible. The turn signal light switch will not work when the emergency flashers are operating. 154 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 337
is not running. Front fog lights To adjust the brightness of the instrument panel lights, turn the knob. To turn on the front fog lights, twist the band of the headlight and turn signal switch lever. They will come on only when the headlights are on low beam. 155 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 338
, in the following cases, the light goes off immediately. D All the side doors and back door are closed when the ignition key is in the "ACC" or "ON" position. D All the side doors and back door are closed and locked. Personal light main switch 156 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 339
switch linked operation. D Changing the duration of lighting To prevent the battery being discharged, the lights will automatically turn off when the key is removed and the door is left opened with the switch at "DOOR" position for 20 minutes or more. Personal light main switch 157 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 340
, in the following cases, the light goes off immediately. D All the side doors and back door are closed when the ignition key is in the "ACC" or "ON" position. D All the side doors and back door are Personal light main switch closed and locked. 158 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 341
fluid from freezing on your windshield, which can block your vision. D Cancelling the door key or the wireless remote control transmitter linked operation D Changing the duration of lighting To prevent the battery being discharged, the light will automatically turn off when the key is removed - 2004 Toyota Sienna | Navigation Manual - Page 342
. If a nozzle becomes blocked, contact your Toyota dealer to have the vehicle serviced. NOTICE z Do not operate the rear wiper if the rear window is dry release it. For instructions on adding washer fluid, see "Adding washer fluid" on page 479 in Section 7- 3. 160 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 343
the switch once again to turn the defoggers off. The system will switch. The key must be in the "ON" position. The thin heater wires on the inside of the rear window will quickly clear the window surfaces. An indicator light will illuminate to indicate 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 344
04 SIENNA_U (L/O 0408) 162 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 345
164 165 166 167 OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ...Engine coolant temperature gauge ...Tachometer ...Odometer and two trip meters ...Service reminder indicators and warning buzzers ... 163 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 346
needle of the fuel gauge returns to "E" when the ignition switch is turned to the "START" position. The gauge indicates the engine coolant temperature when the ignition switch is on. The engine operating temperature will vary with changes in weather and engine load. If the needle moves into the red - 2004 Toyota Sienna | Navigation Manual - Page 347
with the air conditioning on in stop- and- go traffic. NOTICE Do not let the indicator needle get switch is turned to the "START" position. NOTICE z Do not remove the thermostat in the engine cooling system switch is turned to the "START" position. 165 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 348
and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the the electrical power source is disconnected. 166 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 349
Toyota dealer. (a) or (b) (indicator and buzzer) Fasten driver's seat belt. (c) Fasten front passenger's seat belt. (d) Stop and check. (e) or Take vehicle to Toyota dealer. (f) Low fuel level warning light Fill up tank. (g) Stop and check. 167 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 350
dealer. (h) or (i) Close all doors. (j) Take vehicle to Toyota dealer immediately. (k) Take vehicle to Toyota dealer. (l) Adjust tire pressure. If the light remains, contact Toyota dealer. (m) Add washer fluid. (n) Replace engine oil. 168 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 351
(L/O 0408) If the indicator or buzzer comes on... Do this. Check the condition according to the warning code. If the system malfunctions, contact Toyota dealer. (o) Dynamic laser cruise control master warning light (p) Key reminder buzzer Remove key. 169 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 352
on even if the parking brake is applied when the ignition key is in the "ON" position. D The light does not come on even if the ignition key is turned on with the parking brake released. A warning light turning on briefly during operation does not indicate a problem. 170 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 353
you are driving, there is a problem somewhere in the charging system. The engine ignition will continue to operate, however, until the battery is discharged. Turn off the air conditioning, blower, radio, etc., and drive directly to the nearest Toyota dealer or repair shop. D Loose fuel tank cap - 2004 Toyota Sienna | Navigation Manual - Page 354
up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. D The light does not - 2004 Toyota Sienna | Navigation Manual - Page 355
braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. (i) Open Door Warning Light This light - 2004 Toyota Sienna | Navigation Manual - Page 356
on after the ignition key is turned to "ON". D The warning light comes on while driving. Two- wheel drive models only-The "TRAC OFF" indicator light will come on when the "VSC" warning light comes on even if the "TRAC OFF" switch is not pushed. 174 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 357
buzzer reminds you to remove the key when you open the driver's door with the ignition key in the "ACC" or "LOCK" position. CHECKING SERVICE REMINDER INDICATORS (except the low fuel level warning light and low windshield washer fluid level warning light) 1. Apply the parking brake. 2. Open one of - 2004 Toyota Sienna | Navigation Manual - Page 358
04 SIENNA_U (L/O 0408) 176 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 359
Ignition switch, Transmission and Parking brake Ignition switch with steering lock ...Automatic transmission ...Traction control system ...Vehicle stability control system ...Tire pressure warning system ...Parking brake ...Cruise control ...Dynamic laser cruise controll ... 177 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 360
instrument panel may move when the ignition switch is turned to the "ON" position. "ACC"-Accessories such as the radio operate, but the engine is off. If you leave the key in the "ACC" or "LOCK" position and open the driver's door, a buzzer will remind you to remove the key. "LOCK"-Engine is off - 2004 Toyota Sienna | Navigation Manual - Page 361
into overdrive possible) 4: Engine braking (shifting into overdrive not possible) Shift with the brake pedal depressed. (The ignition switch must be in "ON" position.) Selector lever 3, 2: Stronger engine braking L: Maximum engine braking Shift normally. 179 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 362
brake pedal, shift the selector lever to "D". When the lever is in the "D" position, the automatic transmission system will select the most suitable gear for running conditions brake and brake pedal. Depress the accelerator pedal slowly for smooth starting. 180 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 363
switch in the "ON" position, rear view monitor system will activate. For instructions, see "Rear view monitor system" on page 337 in Section 1- 9. (f) Parking 1. Bring the vehicle to a complete stop. 2. With the brake in hill climbing or hard towing. 181 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 364
immediately afterward. D When towing a trailer, in order to maintain engine braking efficiency, do not use "D" position. CAUTION Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. 182 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 365
Push "TRAC OFF" switch. The "TRAC OFF" indicator light will come on. The vehicle stability control system is always activated, even if the traction control system is turned off. To turn on: Push "TRAC OFF" switch once again. The "TRAC OFF" indicator light will go off. 183 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 366
, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving. D The indicator light remains on after the ignition is turned on. D The indicator light comes on with the normal driving mode while driving. 184 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 367
the following conditions occur: D The system controls the spinning of the 4 wheels. At this time, the slip indicator light blinks. D You may feel vibration or noise in your vehicle, caused by operation of the brakes. This indicates the system is functioning properly. The slip indicator light comes - 2004 Toyota Sienna | Navigation Manual - Page 368
the system is in the self- check mode, but does not indicate a malfunction. D The warning light does not come on after the ignition key is turned to "ON". D The warning light remains on after the ignition key is turned to "ON". D The warning light comes on while driving. 186 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 369
come on when the ignition key is turned to "ON" and will go off after a few seconds. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving. 187 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 370
comes on even if the "TRAC OFF" switch is not pushed. LOW TIRE PRESSURE WARNING LIGHT This light comes on when the ignition key is turned to the "ON" position. It goes off after a few seconds. This indicates that the tire pressure warning system is functioning properly. If the low tire pressure - 2004 Toyota Sienna | Navigation Manual - Page 371
Once the ignition switch is turned off, the warning light also goes off. If the light comes on again when the vehicle is started after adjusting the tire pressure to the specified level, have the tire pressure warning system checked at your Toyota dealer. If you have a flat tire, replace it with the - 2004 Toyota Sienna | Navigation Manual - Page 372
When initializing the system, the present tire condition is stored as a standard. D Avoid abrupt steering wheel maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes, causing death or serious injury. 190 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 373
and hold the reset switch, have the low pressure warning system checked at your Toyota dealer. When the warning light blinks twice every second while driving, you may be unable to reset the system. In this case, set the system again according to the above procedure. 191 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 374
or snow- covered) or winding roads. D Avoid vehicle speed increases when driving downhill. If the vehicle speed is too fast in relation to the cruise control set speed, cancel the cruise control then downshift the transmission to use engine braking to slow down. Type B 192 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 375
. TURNING THE SYSTEM ON To operate the cruise control, press the "ON- OFF" button. This turns the system on. The indicator light in the instrument Each tap changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal. 193 2004 SIENNA from Aug. '04 Prod. - 2004 Toyota Sienna | Navigation Manual - Page 376
occurs, there is some trouble in the cruise control system. D The indicator light does not come on. D The indicator light flashes again. D The indicator light goes out after it comes on. If this is the case, contact your Toyota dealer and have your vehicle inspected. 194 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 377
emergency situations. Do not use cruise control except in appropriate road and traffic conditions. Always drive carefully and attentively. Before using dynamic laser cruise control, read and understand the following instructions. Instrument cluster 195 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 378
radar sensor in this system light or moderate. To avoid serious injury, you must use caution and be attentive to road and traffic conditions while using dynamic laser cruise control. Vehicle- to- vehicle distance control mode Conventional (fixed speed) cruise control mode 196 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 379
then the alarm warns you to also manually apply brakes. 3. Follow- up cruising function: After deceleration, your vehicle cruising speed changes in proportion to the speed of the vehicle speed setting, see "SETTING THE DESIRED SPEED" on page 201. 197 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 380
cruise control in the following conditions: In bad weather (such as rain, fog, snow, sandstorms or direct sunlight, or when raindrops or snowflakes get on the laser radar sensor glass), the vehicle- to- causing the nose of your vehicle to tilt up. 198 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 381
. On slippery road surfaces (icy or snow- covered road surfaces), the tires will race and you due to road construction) or your vehicle condition (steering wheel maneuvering, position in the manually depress the brake pedal to slow down your vehicle. 199 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 382
sensor does not detect the vehicle and will accelerate to the preset speed. D When a slower vehicle in front of you leaves the lane, the dynamic laser cruise control will no longer detect a vehicle ahead and will attempt to accelerate the vehicle to the faster preset speed. 200 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 383
CANCEL" b. Depressing the brake pedal. c. Pressing the "ON- OFF" button. If cancelled by a. or b., the "READY" indicator comes on and the indicator light goes off in the instrument panel. In this case, the preset speed data is cleared, and you must set the speed from the beginning. 201 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 384
cancel speed.) b. The slip indicator light blinks and an alarm sounds. (This occurs . Although there is no problem to continue driving, please reset is to depress the brake pedal and then push the pushing the lever down, the system will memorize the upper limit 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 385
the vehicle- to- vehicle distance control mode is activated or the "READY" indicator comes on, the vehicle- to- vehicle distance setting can be changed. The vehicle- to- vehicle distance is always set to LONG when the ignition switch is turned on. 203 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 386
distance considering traffic conditions. The approximate vehicle braking control will cease, requiring the manual application of brakes. CAUTION Braking control braking cannot be applied properly, braking control is automatically activated. At this time, the display flashes. 204 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 387
result in system malfunction. A special device is required to adjust the laser radar sensor alignment. Be sure to have the sensor adjusted by your Toyota dealer. D Do not affix a sticker (including a transparent sticker) or attach an accessory around the laser radar sensor. 205 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 388
the weather clears, the system might have malfunctioned. Although there is no problem to continue driving, please contact your Toyota dealer. CAUTION Always keep the sensor glass and never allow it to be covered with icicle or any substance, so it can detect the vehicle in front. 206 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 389
the system. If the setting still cannot be made or the same code appears again, the system might have malfunctioned. Although there is no problem to change will occur so it is better to drive without the cruise control. D Do not use the conventional (fixed speed) mode in the following conditions, - 2004 Toyota Sienna | Navigation Manual - Page 390
system on. The "CRUISE" and "READY" indicator lights in the instrument cluster comes on. Push the lever in the "MODE" direction for longer than 1 second to change to conventional cruise control mode. The indicator the speed set prior to acceleration. 208 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 391
it is no problem to continue cruise control mode, engine braking will not be enabled indicator light blinks and an alarm sounds. (This occurs when the vehicle is about to skid.) If cancelled by a. or b., the preset speed data is cleared and you must set the speed from the beginning. 209 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 392
or the same code appears again, the system might have malfunctioned. Although there is no problem to continue driving, please contact your Toyota dealer. If there is trouble in the conventional cruise control mode, the "CRUISE" indicator light in the instrument cluster flashes, the master warning - 2004 Toyota Sienna | Navigation Manual - Page 393
...Using your audio system ...Audio remote controls ...Rear seat audio system ...Rear seat entertainment system ...Car audio/video system operating hints ... For vehicle equipped with Navigation system, please refer to the separate "Navigation System Owner's Manual". 211 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 394
1- 2: AM·FM radio/cassette player/ compact disc player (with compact disc changer controller) Type 2: AM·FM radio/cassette player/compact disc player with changer 212 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 395
To prevent damage to the antenna, make sure it is removed before driving your Toyota through an automatic car wash. z On- glass antenna: Attaching the film (especially conductive or metallic type) on the rear glass will noticeably reduce the sensitivity of the radio. 213 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 396
anything except a compact disc into the slot. NOTICE Never try to disassemble or oil any part of the compact disc player. Do not insert anything other than compact discs into the slot. The player is intended for use with 12 cm (4.7 in.) discs only. 214 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 397
04 SIENNA_U (L/O 0408) -Controls and features "Type 1- 1 Details of specific buttons, controls and features are described in the alphabetical list that follows. 215 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 398
04 SIENNA_U (L/O 0408) "Type 1- 2 Details of specific buttons, controls and features are described in the alphabetical list that follows. 216 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 399
frequency will appear on the display. These systems can store one AM and two FM stations indicates which side is currently selected (" " indicates the top side, " " indicates the "AUDIO CONTROL" knob, the mode changes. To adjust the tone and balance, turn 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 400
changes between the CD player and DVD player. When the DVD player is in operation, "AUX" appears on the display. Error messages If the player malfunctions, your audio system . "ERROR 3": There is a problem inside the system. Eject the disc or magazine. Set 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 401
Push "PWR·VOL" to turn the audio system on and off. Turn "PWR·VOL" to back to the first track on the disc and replay. To turn off the repeat feature, push this button again. SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. 219 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 402
of the current track, quickly push the down side of the button one time. Vehicles with rear seat entertainment system- While the DVD player is in operation, the chapter or track can be changed by pushing the "Ɯ" or "Ɲ" side of the "SEEK·TRACK" button. 220 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 403
switches from stereo to mono reception. TAPE Push the "TAPE" button to play a cassette tape. TEXT This button is used to change is playing. The display changes in the order from the elapsed time to disc title to track title, then back to the elapsed time. 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 404
04 SIENNA_U (L/O 0408) "Type 2 Details of specific buttons, controls and features are described in the alphabetical list that follows. 222 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 405
the button will be ejected first. If the ejected disc is not removed for a long time, the eject function will be cancelled. ( tape. The display indicates which side is currently selected (" " indicates the top side, " " indicates the bottom side). Auto 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 406
changes between the CD player and DVD player. When the DVD player is in operation, "AUX" appears on the display. Error messages If the player malfunctions, your audio system . "ERROR 3": There is a problem inside the system. Eject the disc or magazine. Set 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 407
will automatically open again and the indicators will turn green so the system allows you to set twelve FM and six RDS stations, three for each of the preset button. If the RDS is off or RDS stations are not preset to the preset buttons, "FM TYPE" will not appear on the display. 225 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 408
0408) RDS (Radio Data System) Your audio system is equipped with Radio Data System (RDS). RDS station are listening to. When the disc ends, the player will automatically go back to the first track on the disc and replay. To turn off the again. 226 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 409
time. Vehicles with rear seat entertainment system- While the DVD player is in operation, the chapter or track can be changed by pushing the "Ɯ" or "Ɲ" side weak, the radio switches from stereo to mono reception. TAPE Push the "TAPE" button to play a cassette tape. 227 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 410
message has been displayed, the message will disappear. The RDS audio system has memory to store three 64- character messages. To store a playing. The display changes in the order from the elapsed time to disc title to track title, then back to the elapsed 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 411
you push this button, the program type changes as in the following: D D D D D D D D ROCK EASY LIS (Easy listening) CLS/JAZZ (Classical music and Jazz) R&B (Rhythm and Blues) INFORM (Information) RELIGION MISC (Miscellaneous) ALERT (Emergency message) 229 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 412
Audio remote controls (steering switches) Some parts of the audio system can be adjusted using the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1. Volume control switch 2. " ƜƝ" switch 3. "MODE" switch 230 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 413
of blank space between tracks for the track switch to work correctly. In addition, the feature switch. The track number will be increased or reduced. The track number you select is not valid if it is higher than the number of the tracks remaining on the current side of the cassette. 231 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 414
on the front and rear audio systems at the same time, AM and FM modes cannot be changed on the rear seat audio system. You can enjoy the rear seat audio system with commercial headphone. See "-Headphone input jacks" on page 240 in this Section for details. 232 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 415
level that the DVD will play, you may be startled by louder sound effects or when you change to a different audio source. Be sure to adjust the volume with this in mind. Make sure the volume is not increased, before you turn on the headphone. 233 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 416
to explode or leak. BEFORE USING THE CONTROLLER (for new vehicle owners) A battery is already set in the controller with an insulating sheet, which prevents the battery from being discharged. Before using the controller, remove the insulating sheet. 234 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 417
controller to the signal reception portion of the rear seat audio system display. The rear seat audio system controller can be operated when the ignition switch is in the "ACC" or "ON" position. The or front seat side table when it is not in use. 235 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 418
. (" " indicates the top side, " " indicates the bottom side.) Auto- reverse feature: After the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast forwarding. 236 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 419
" " or " " (TUNE/ TRACK) button to fast forward or reverse within a compact disc. When you release the button, the compact disc player will resume playing. 237 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 420
is a problem inside the system. Eject the disc. Set the disc again. "ERR 4": Over- current. Ask your Toyota dealer to inspect. If the malfunction still exists, take your vehicle to your Toyota dealer. 4. "OFF" button Push "OFF" button to turn off the rear seat audio system. 238 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 421
sure that the positive side of the controller battery is facing correctly. z Do not replace the battery with wet hands. Water may cause rust. z Do not touch or move any components inside of the controller, or it may interfere with proper operation. 239 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 422
input jacks z Be careful not to bend the electrode of the controller battery insertion and that dust or oil does not adhere to the transmitter case. z Close the battery case securely. After replacing the battery a significant impact on the human body. 240 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 423
components. 1. Rear seat entertainment system display 2. Headphone input jacks 3. Headphone volume control dials 4. Front audio system 5. Power outlet main switch 6. Power outlets 7. Input terminal adapter 8. Rear seat entertainment system controller 241 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 424
play, you may be startled by louder sound effects or when you change to a different audio source. Be sure to adjust the volume with your personal audio system is connected to the input terminal adapter. For details, refer to the manufacturer's instructions. 242 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 425
illumination of the screen is automatically turned off when the display is closed. However, the rear seat entertainment system is not turned off. NOTICE The screen should be cleaned with a dry soft cloth. If the screen display when it is not in use. 243 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 426
the controller. It may cause an accident, fire or electric shock. NOTICE Keep the controller away from direct sunlight, high heat and high humidity. These conditions could cause the case to deform or the battery to explode or leak. 244 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 427
04 SIENNA_U (L/O 0408) 1. Remove the cover of the controller as shown. 2. Remove the insulating sheet. 245 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 428
output portion of the controller to the signal reception portion of the rear seat entertainment system display. The controller does not operate properly when the signal reception portion of the display or front seat side table when it is not in use. 246 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 429
: Any changes or modifications part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Including interference that may cause undesired operation. 247 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 430
seat entertainment system. 4. Joy stick This joy stick selects a control switch, mode switch on the screen or the menu for the disc. 5. "ENT" button This button inputs the selected switch or the selected skips to the predetermined scene for the disc. 248 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 431
system or select the track/chapter when the DVD player is operated. 21. "CURSOR" button This button indicates the control switches on the screen when the DVD player is operated. 22. "VIDEO" button This button turns on the video mode when your personal audio device is connected. 249 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 432
)" button This button indicates the control switches on the screen when the DVD player is operated. This button also can be used when you lose sight of the controller. 6. Joy stick This joy stick selects a control switch, mode switch on the screen or the menu for the disc. 250 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 433
on and off 7. "ENT" button This button inputs the selected switch or the selected menu for the disc. 8. "DISC" indicator light This light indicates that the disc is loaded. To turn on the "SOURCE" button. system, push the The screen indicates which mode can be selected. Push the "DVD" or "VIDEO - 2004 Toyota Sienna | Navigation Manual - Page 434
, AM and FM modes cannot be changed on the rear seat audio system. Controller To turn off the system, push the "OFF" button. When the front audio system is turned off, the rear audio system and the DVD player will be turned off simultaneously. DVD player unit 252 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 435
When the "ENT" button is pushed, the mode display changes to green. If the mode display is gray, it cannot be selected. The "Speaker sound" on the mode display is selected on the front audio system. Cassette tape player and compact disc player Radio 253 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 436
a mode, the screen indicates which is selected. Radio AM SYSTEM To operate the front audio system, use the following switches. 1. "DISC/CH/PROG" button Radio You can scan only the preset stations for the band of the front audio system. (For instructions 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 437
to select the other side of a cassette tape. The screen indicates which side is currently selected. (" " indicates the top side, " " indicates the bottom side.) Auto- reverse feature: After the cassette player spoken, live, or classical recordings. 255 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 438
only with the same or equivalent type of battery recommended by a Toyota dealer. z Dispose of used batteries according to local regulations. Replace the battery according to the following procedure: 1. Remove the cover of the controller as shown. 256 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 439
on the screen: It indicates that the DVD region code is not set properly. If "DVD ERROR" appears on the screen: There is a problem inside the player. Eject the disc. Set the disc again. If the malfunction still exists, take your vehicle to your Toyota dealer. 257 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 440
for this player, see "Car audio/video system operating hints" on page 292 or oil any part of the DVD player indicator light turns on while the disc is loaded. If the label faces down, the disc cannot be played. In this case, "DISC CHECK" and disc number appear on the screen. 258 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 441
04 SIENNA_U (L/O 0408) -Selecting the DVD mode To select the DVD mode, push the "DVD" button on the controller. You can also select the DVD mode on the mode selection screen mentioned above. EJECTING THE DISC Push the " " button. 259 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 442
you turn the ignition key to the "ACC" or "ON" position. Push the "OK" switch when you read the message. The DVD player can be operated with the controller buttons directly. 1. "TOP MENU" button 10 AA" and """" buttons Controller DVD player unit 260 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 443
, the outline of the switch changes to blue. Push the "ENT" button, and the switch will be highlighted in green. Controller TURNING THE OPERATION SWITCHES ON AND OFF To turn on the operation switches, push the "CURSOR" button on the controller. DVD player unit 261 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 444
04 SIENNA_U (L/O 0408) Top page (DVD video operation switch) Top page (DVD audio operation switch) Top page (video CD) Second switch) page (DVD video operation Second switch) page (DVD audio operation Second page (video CD) 262 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 445
on the "Top Page" and "Second Page" screens. To change the screen, push the "Top Page" or "Second Page" switch on the screen. On the screen If " " appears on the screen when you select a switch, it indicates that the switch cannot work. Controller 263 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 446
case, verify that the video tracks are playing and then activate playback. The title/chapter number and playback time display may not appear while playing back certain DVD video discs. 264 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 447
on the menu screen for the disc, push the "Top Menu" switch on the screen. You can also turn on the menu screen by pushing the "TOP MENU" switch on the controller. For the operation of the menu screen, see the separate manual for the DVD disc. 265 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 448
To turn on the selecting switch, push the " " switch. To turn off the switch, push the "OFF" switch on the screen. To turn on the switch again, push the "ON" switch on the screen. To return to the previous screen, push the "Back" switch on the screen. 266 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 449
. If you want to return to the beginning of the current track, release the switch/button. DVD video only- Push the "AA" or """" switch/button while pausing, the DVD video plays the slow- motion video replay or the slow- motion video replay in reverse. 267 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 450
the "Return" switch. The DVD player starts playing from the beginning of the predetermined screen. You can also display the screen by pushing the "RETURN" button on the controller. For further details of the predetermined screen, see the separate manual for the DVD disc. 268 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 451
the group you want to play, push the group number. If you enter the wrong number, push the "Clear" switch to delete the number. Push the "Enter" switch on the screen. The player starts playing the disc from the selected bonus group number. DVD audio 269 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 452
screen will appear. You can also display the screen by pushing the "SUB TITLE" button on the controller. CHANGING THE STILL PICTURE DVD audio only- Push the "Still Prev." or "Still Next" switch on the screen to forward or reverse the still pictures. 270 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 453
time you push the "Sub Title" switch, another language stored on the disc is selected. To turn off the subtitles, push the "Hide" switch. Push the "Back" switch to return to the previous screen. The selected subtitle language will appear on the screen. 271 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 454
screen, push the "Hide" switch. Push the "Back" switch to return to the previous screen. DVD video- The selected audio language will appear on the screen. DVD audio- DVD video The sound condition which is playing at present will appear on the screen. DVD audio 272 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 455
appears on the screen. Each time you push the "Angle" switch, the angle changes. The angle number which you can select will appear on the screen. To turn off the screen, push the "Hide" switch. Push the "Back" switch to return to the previous screen. 273 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 456
you change the initial setting, push the "Enter" switch. The initial setting switch will be turned off and return to the picture previously. When the "Initial Setting" switch on "Setup Menu 2" is pushed, all menus are initialized. Setup Menu 1 screen Setup Menu 2 screen 274 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 457
1" screen, push the "Back" switch. If you cannot find a language you want to read, push the "Others" switch. The "Enter Subtitle Lang. Code" screen will appear. list are pushed, appear. to hear To return to the "Select Audio Language" screen, push the "Back" switch. 275 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 458
which are not on the list are entered and the "Enter" switch is pushed, the "Incorrect code" screen will appear. Push the language code you want to read again. To return to the "Select DVD Language" screen, push the "Back" switch on the screen. 276 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 459
to delete the number. You cannot change the setting without inputting the password. When you forget or change the password, push the "Clear" switch ten times to initialize the password. To return to the "Setup Menu 1" screen, push the "Back" switch. 277 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 460
smaller the level number, the stricter the age limit. Push the "Back" switch to return to the "Setup Menu 1" screen. SETTING THE DISPLAY MODE Each time you push the "Display Mode" switch on the "Setup Menu 2" screen, the display mode is changed from wide mode to auto mode. 1412 1620 1922 1821 1115 - 2004 Toyota Sienna | Navigation Manual - Page 461
1315 1318 1319 Georgian Kazakh Greenlandic Cambodian Kannada Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay 279 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 462
2019 2020 2023 2111 2118 2126 2209 2215 2315 2408 2515 2621 Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapük Wolof Xhosa Yoruba Zulu 280 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 463
push this switch again. 4. "SCAN" switch (DVD audio only) Push the "SCAN" switch. The player will scan all the tracks on the disc you are listening to. To stop scanning, push this switch again. If the player scanned all the tracks on the disc, it will stop scanning. DVD audio 281 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 464
The player starts playing the disc from the entered disc menu number. The entered disc menu number will appear on the screen. Push the "Back" switch to return to the menu screen. Move up and down the switches by pushing the "Shift keys" on the screen. 282 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 465
Next" or "D. Menu Prev." switch while the disc menu is displayed. The next or previous page will appear on the screen. Push the "D. Menu Next" or "D. Menu Prev." switch while the player is playing video. The next or previous track will be searched and played. 283 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 466
(video CD only) Push the "Main/Sub" switch to change a multiplex transmission. The mode changes from Main/Sub to Main to Sub and back to Main/Sub by pushing the "Main/Sub" switch. CHANGING THE INITIAL SETTING (video CD only) Push the "Set Up" switch on the screen and then the initial setting screen - 2004 Toyota Sienna | Navigation Manual - Page 467
is playing. When the track ends, it will automatically replay. To turn off the repeat feature, push this switch again. Push the " " or " " switch to fast forward or reverse the disc. When you push the switch again, the DVD player will resume playing. 285 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 468
to deflect the sunlight. This is not a malfunction. Each time you push the "+" or "- " switch, you can adjust the color, contrast, tone and brightness of the screen. + or RED Strengthens the Weakens the tone Darkens COLOR CONTRAST TONE BRIGHTNESS 286 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 469
formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating where you can use. If the DVD video disc is not labeled "ALL" or "1", you cannot use it have a region code, in some cases you cannot use it. 287 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 470
changed depending divided in parts by title Indicates the number of language subtitles. Indicates the number of angles. Indicates the screen to be selected. Wide screen: 16:9 Standard: 4:3 Indicates regions in which this video disc can be played. ALL: all countries Number: region code 288 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 471
Red: Audio input adapter White: Audio input adapter NOTICE Close the input terminal adapter cover when the input terminal adapter is not in use. Inserting a foreign object other than the appropriate plug that fits the adapter may cause electrical failure or short circuit. 289 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 472
. D Appliances with high initial peak wattage: cathode- ray tube type televisions, compressor- driven refrigerators, electric pumps, electric tools, etc. D Measuring devices which process precise data: medical equipment, measuring instruments, etc. 290 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 473
input jacks D Other appliances requiring an extremely stable power supply: microcomputercontrolled electric blankets, touch sensor lamps, etc. Certain electrical appliances may cause radio noise. You can enjoy the rear seat entertainment system . 291 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 474
reception conditions change constantly as your vehicle moves. Here are some common reception problems that probably do not indicate a problem with antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception. 292 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 475
sound alternately strong tape head and other parts regularly. D Avoid air conditioning to cool the vehicle interior before you use the players. D Low- quality cassette tapes can cause many problems they appear to be working. Remove the disc from the player 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 476
playable on your compact disc player. SACD dts- CD Copy- protected CD CD- R (CD- Recordable) CD- RW (CD- Re- writable) CD- ROM Video CDs 294 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 477
- writable) CD- ROM DVD- R DVD+R DVD+RW DVD- RW DVD- ROM DVD- RAM Special shaped discs Low quality discs Transparent/translucent discs Labeled discs 295 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 478
a track. (To see a pin hole, hold the disc up to the light.) To clean a compact disc: Wipe it with a soft, lint- free cloth Remove discs from the compact disc player when you are not listening to them. Store them in their plastic cases away from moisture, heat, and direct sunlight. 296 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 479
Front automatic air conditioning system Controls ...Air flow selector settings ...Operating tips ...Side vents ...Rear manual air conditioning system Controls ...Air flow selector settings ...Rear automatic air conditioning system Controls ...Air flow selector settings ... 297 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 480
04 SIENNA_U (L/O 0408) Front manual air conditioning system- -Controls 1. "A/C" button 2. Air intake selector 3. Air flow selector 4. Temperature selector 5. Fan speed selector 298 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 481
vents. 3. Floor-Air flows mainly from the floor vents. 4. Floor/Windshield-Air flows mainly from the floor vents and windshield vents. Turning the air flow selector to the floor/windshield position turns on the defogging function with the purpose of clearing the front view. 299 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 482
source. 1. Recirculate-Recirculates the air inside the vehicle. 2. Fresh-Draws outside air into the system. To prevent fogging up of the windshield, the air intake mode may change automatically to FRESH depending on the condition of the air conditioning system. 300 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 483
few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly. D Make sure the air intake grilles in front of the windshield the air intake selector be set to FRESH and the fan speed selector to any setting except "OFF". 301 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 484
humid days, do not blow cold air on the windshield-the difference between the outside and inside temperatures could make the fogging worse. D Choose floor/windshield air flow to heat the vehicle interior while defrosting or defogging the windshield. 302 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 485
more quickly. Press the "A/C" button for dehumidified heating. This setting clears the front view more quickly. D To heat the vehicle interior while defrosting the windshield, floor/windshield air flow. choose 303 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 486
indicator off-individual temperature setting) 5. "MODE" button (air flow selector) 6. Windshield air flow button 7. Temperature selector ("REAR TEMP") (individual setting on rear passenger side only) 8. Fan speed selector 9. Air intake selector 10. "OFF" button 11. "AUTO" button 304 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 487
button indicator on- This button changes the changes between "_C" and "_F" when the unit of the outside temperature display is changed. (For details, see "Multi- information display" on page 316 in Section 1- 9.) "OFF" button Push the button to turn off the air conditioning system. 305 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 488
intake mode may change automatically to FRESH depending on the condition of the air conditioning system. "A/C" button To turn on the air conditioning, press the "A/C" button. The "A/C" button indicator will come on. To turn the air conditioning off, press the button again. 306 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 489
for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly. D Make sure the air intake grilles in front of the windshield are air intake selector be set to FRESH and the fan speed selector to any setting. 307 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 490
" button. Temperature-To the desired temperature MANUAL OPERATION For best results, set controls to: Heating Fan speed-To the desired fan speed Temperature-Towards high temperature Air intake-FRESH (outside air) Air flow-FLOOR Air conditioning-OFF Air conditioning Fan speed-To the desired fan speed - 2004 Toyota Sienna | Navigation Manual - Page 491
shown. D To heat the vehicle interior while defrosting the windshield, floor/windshield air flow. choose D On humid days, do not blow cold air on the windshield-the difference between the outside and inside temperatures could make the fogging worse. 309 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 492
04 SIENNA_U (L/O 0408) Rear manual air conditioning system- -Controls 1. Fan speed selector (rear) 2. Air flow selectors 3. Temperature selector 4. Fan speed selector (front) 310 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 493
, to the left to cool. Air flow selectors Push the button to select the vents used for air flow. 1. Panel-Air flows from the roof panel vents. 2. Bi- level-Air flows from both the roof panel vents and floor vent. 3. Floor-Air flows from the floor vent. 311 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 494
04 SIENNA_U (L/O 0408) Rear automatic air conditioning system- -Controls 1. "AUTO" button 2. Air flow selectors 3. Temperature selector (rear) 4. Fan speed selectors 5. "OFF" button 6. "REAR" button 7. Temperature selector (front) 312 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 495
off the rear air conditioning system. Air flow selectors Push the button to select the vents used for air flow. 1. Panel-Air flows from the roof panel vents. 2. Bi- level-Air flows from both the roof panel vents and floor vent. 3. Floor-Air flows from the floor vent. 313 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 496
04 SIENNA_U (L/O 0408) -Air flow selector settings 314 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 497
holder ...Cup holders ...Bottle holders ...Storage box ...Removable console box ...Note pad holder ...Front seat side table ...Coat hooks ...Grocery bag hooks ...Cargo net hooks ...Tie- down hooks ...Roof luggage carrier ...Sun shade ...Floor mat ... 315 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 498
04 SIENNA_U (L/O 0408) Multi- information display- 1. "E/M" button 2. Garage door opener buttons 3. "MODE" button 4. Garage door opener indicator 5. Outside temperature and cruise information display 6. Compass 316 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 499
to the front and rear air conditioning displays. The display variations are as follows; Indication English/U.S. Customary System (E) Metric (M) Outside temperature _F _C Instantaneous fuel consumption/ Average fuel consumption MPG L/100 km Distance to empty MI km 317 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 500
, entry doors, door locks, home lighting systems, and security systems, etc. (a) Programming the HomeLinkR The HomeLinkR in your vehicle has 3 buttons and you can store one program for each button. To ensure correct programming into the HomeLinkR, install a new battery in the hand- held transmitter - 2004 Toyota Sienna | Navigation Manual - Page 501
indicator light on the HomeLinkR changes door. The ceiling mounted garage door opener motor should now recognize the HomeLinkR unit and be able activate the garage door up/down. 4. Repeat steps 1 through 3 for each remaining HomeLinkR button to program another rolling code system. 319 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 502
other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer two seconds until step 5 is complete. 5. When the indicator light on the HomeLinkR changes from a slow to a rapid flash after 20 seconds, 320 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 503
before April 1, 1982.) A garage door opener which cannot detect an object (signaling the door to stop and reverse), does not meet current federal safety standards. Using a garage door opener without these features increases risk of serious injury or death. 321 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 504
button until the desired unit display appears. (At this time, front and rear air conditioning displays also change.) 1. Outside temperature The outside temperature display indicates the outside air temperature. The displayed value is updated every 1 second. The displayed temperature ranges from - 2004 Toyota Sienna | Navigation Manual - Page 505
and road conditions. If compass indicates the battery has been disconnected. The compass works to calibrate the direction automatically while the vehicle is in motion, if deviation is small. For additional precision or for complete calibrating, see "CALIBRATING THE COMPASS" below. 323 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 506
currently located, refer to the following map. Compass sensor The compass sensor is on the roof of the vehicle. NOTICE Do not put magnets or a metal object on or near the roof of the vehicle. Doing this may cause malfunction of the compass sensor. 324 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 507
: Guam: Saipan: 5 8 8 After calibration, leaving the system for several seconds returns to the compass mode. CAUTION Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped. Zone number 325 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 508
block. When the "CAL" indication goes off and the compass returns to the normal mode, calibration is complete. If you want to restart the calibration before it is complete, push both of the "MODE" and "E/M" buttons simultaneously for 10 seconds again. 326 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 509
calibration after the battery has been removed, replaced or disconnected. manual air conditioning system D During calibration, do not operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration. With automatic air conditioning system 327 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 510
will automatically be set to 1:00 (one o'clock). When the instrument panel lights are turned on, the brightness of the time indication will be reduced. The conversation mirror is designed for the driver and front . To use the mirror, push it down. 328 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 511
Rear and rear corner sensors work The mirror angle can be adjusted by pushing its edge. only when the transmission is in the "R" position. D When the vehicle is forwarding, the front corner sensors work. 1: Rear sensors 2: Rear corner sensors 3: Front corner sensors 329 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 512
Push the switch again. In the following cases, the buzzer will sound several times and the indicator will stay on to indicate that the system is not working properly. Front corner sensors D When the temperature is extremely low. D When any of the sensors are malfunction. 330 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 513
This system is designed to inform you of the approximate distance between your vehicle and an obstacle by indicator and buzzer. Rear sensors Distance less Indicator and buzzer Intermittent Fast intermittent Continuous 1: Front sensors 2: Rear corner sensors 3: Rear sensors 331 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 514
. D In certain situations, the system will not function properly and when the vehicle approaches certain objects, the system will not detect those objects. Therefore, always observe the area around the vehicle and do not rely solely on the system. 332 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 515
an air brake sound from a heavy- duty vehicle, issues ultrasonic waves, near your vehicle D Objects with a sharp edge D Small or short objects D Tall objects with an upper part projecting toward the vehicle 1: Rear sensors 2: Rear corner sensors D When attaching a two- way radio antenna D When - 2004 Toyota Sienna | Navigation Manual - Page 516
Push the switch again. In the following cases, the buzzer will sound several times and the indicator will stay on to indicate that the system is not working properly. Rear corner sensors D When the temperature is extremely low. D When any of the sensors are malfunction. 334 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 517
04 SIENNA_U (L/O 0408) This system is designed to inform you of the approximate distance between your vehicle and an obstacle by indicator and buzzer. Rear sensors Distance shown as A in start driving slowly. 1: Rear corner sensors 2: Rear sensors 335 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 518
on the system. D When attaching a two- way radio antenna D When rain or water splashes on the sensor. D When operating the vehicle on an inclined surface D When a radio antenna or fender pole is mounted on your vehicle. D When a towing hitch is mounted on your vehicle. 336 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 519
just under the bumper D Objects very close to your vehicle In the following cases, have Toyota dealer check the system. your D When the bumper is damaged. D When the indicator is continuously on. D Do not use the system when the back door is not completely closed. 337 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 520
D The displayed image may become darker and moving images may be slightly distorted when the system is cold. When backing up, be sure to check behind and all around the vehicle visually and with mirror before proceeding. On screen Corners of bumper 338 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 521
vehicle orientation or road conditions. (for example, snow or mud) is adhering to the camera lights is shining directly into the camera lens D When the sun or the beam of head- THE REAR CAMERA VIEW MONITOR SYSTEM The rear view monitor system camera is located on the back door as shown in the - 2004 Toyota Sienna | Navigation Manual - Page 522
Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera; when transmitted by the camera, the light source appears to have a vertical streak above and below it. Rear 340 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 523
instrument panel. An indicator light will illuminate to indicate that the power outlet is ready for use. Push the main switch once again to turn the power outlet off. When the power outlet is not in use, make sure that the main switch is turned off. Beside third seat 341 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 524
battery , compressor- door closed while driving. D Measuring devices which process precise data: medical equipment, measuring instruments, etc. D Other appliances requiring an extremely stable power supply: microcomputercontrolled electric blankets, touch sensor lamps, etc. 342 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 525
the cover and remove the Velcro loop. Remove the paper strip covering the adhesive on back side of loop and adhere loop to back side of the transmitter near center. Please note if transmitter has wire clip for sun visor, this clip must be removed prior to adhesion of the Velcro. 343 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 526
. Place one spacer on the pin that would be below transmitter button when the cover is closed. Close the cover. When the garage door opener transmitter is properly installed, you can operate the transmitter by pushing the center panel of the cover. 344 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 527
box can be adjusted or removed as shown in the illustration. stop, always keep the garage door opener box closed while driving. holders are designed for holding a light object such as an eyeglass, do pad to prevent the transmitter from clattering. 345 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 528
04 SIENNA_U (L/O 0408) NOTICE z Type A and L-During hot weather, the interior of the vehicle becomes very hot. Do not leave anything flammable roof) Position 1 Position 2 Type B (instrument panel) Type C (instrument panel, without seat heater) 346 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 529
04 SIENNA_U (L/O 0408) Type D (instrument panel, with seat heater) Type F (front door) Type H (spare tire cover) Type E (upper side of the glove box) Type G (quarter trim) Type I (front seat side table) 347 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 530
roof, with rear seat audio system) To use the coin holder, push the button. CAUTION To reduce the chance of injury in case of an accident or a sudden stop while driving, keep the coin holder closed when it is not in use. Type K (front passenger's seat) 348 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 531
on page 357 in this Section. Type G-For details, see "Removable console box" on page 352 in this Section. CAUTION D Do not be thrown about and possibly injure people in the vehicle during sudden braking or in an accident. Type A (instrument panel) Type C 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 532
04 SIENNA_U (L/O 0408) Type E (front side of console box) Type G (console box tray) Type F (rear side of console box) 350 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 533
people in the vehicle during a sudden braking or an accident. Front door NOTICE Do not put a cup or open bottle in the bottle holder because the contents may spill when the door opens or closes. This box is designed to place things like bottles. Sliding door 351 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 534
04 SIENNA_U (L/O 0408) Removable console box UPPER TRAY To access the upper tray, raise the console box lid. CONSOLE BOX To access the console chance of injury in case of an accident or a sudden stop, always keep the console box closed while driving. 352 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 535
position. Between the front seats To remove the console box: Open the auxiliary box of the rear side and pull up the lock release lever to disengage the rear lock. Then lift the console box and release the front hook. Between the second seats 353 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 536
locked by pushing forward, rearward, upward and sideways. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. 354 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 537
is securely locked by pushing forward and rearward. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. 355 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 538
pad holder CAUTION D Make sure the the cup holder and small tray are securely locked by pushing forward and rearward when they are installed. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking in use. 356 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 539
Do not write on the note pad holder while the vehicle is moving. D Do not place anything else on the note pad holder. Such thrown about in the and possibly cause sudden braking or an items may be and pull down the tab as shown in the illustration. 357 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 540
cup holder, as such items may be thrown about and possibly injure people in the vehicle during sudden braking or in an accident. To fold down the table, pull up the lock release lever and push against hang clothes, hang them on the coat hook directly. 358 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 541
heavier than 4 kg (8.8 lb.) in it. z Type D-To prevent damage to the hook, avoid hanging heavy loads on it. Type B (front seats) Type D (under the back door) 359 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 542
to hang cargo net. Although the cargo net itself is not included as an original equipment, these hooks can be used to hang the cargo net. NOTICE To prevent damage to the hook, avoid hanging things other than a cargo net on it. Pattern 1 Pattern 3 Pattern 2 Pattern 4 360 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 543
wide cargo, never exceed the vehicle overall length or width. (See "Dimensions and sizes. 3. After adjusting, be sure to tighten the cross rails by turning knobs clockwise. Follow the manufacturer's instructions and precautions when installing the attachments or their equivalent. 361 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 544
tab slightly to unhook the shade, and lower it slowly. D Do not exceed 68 kg (150 lb.) cargo weight on the roof luggage carrier. NOTICE z Do not place anything where it might hinder the opening/closing roof. place anything on the Quarter window 362 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 545
clips. Fix the floor mat with locking clips into the holes in the floor carpet. CAUTION Make sure the floor mat is properly placed on the floor carpet. If the floor mat slips and interferes with the movement of the pedals during driving, it may cause an accident. 363 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 546
04 SIENNA_U (L/O 0408) 364 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 547
Fuel ...Fuel pump shut off system ...Operation in foreign countries ...Three- way catalytic converter ...Engine exhaust cautions ...Facts about engine oil consumption ...Iridium- tipped spark plugs ...Brake system ...Brake pad wear limit indicators ...Your Toyota's identification ...Theft prevention - 2004 Toyota Sienna | Navigation Manual - Page 548
consult your Toyota dealer. However, occasionally, you may notice light knocking for a short time while accelerating or driving up hills. catalytic converter to lose its effectiveness and the emission control system to function improperly. Also, this can increase maintenance costs. 366 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 549
of four categories that depend on required emission levels. In the U.S., category 4 has been adopted. The WWFC improves air quality by providing for better emissions in vehicle fleets, and customer satisfaction through better vehicle performance. 367 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 550
.) CAUTION Inspect the ground under the vehicle before restarting the engine. If you find that liquid has leaked onto the ground, it is the fuel system has been damaged and it is in need of repair. In this case, do not restart the engine. 368 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 551
to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". The three- way catalytic converter is an emission control device installed in the exhaust system. The purpose is to that might burn easily such as grass, leaves, paper or rags. 369 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 552
from time to time. If you hit something, or notice a change in the sound of the exhaust, have the system checked immediately. D If you smell exhaust fumes in the vehicle, drive with the windows open and the back door and quarter windows closed. Have the cause immediately located and corrected - 2004 Toyota Sienna | Navigation Manual - Page 553
quality of the oil and the conditions the vehicle is driven under. More that the oil level has not changed. The diluting ingredients evaporate out when level regularly could lead to serious engine trouble due to insufficient oil. For detailed information 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 554
indicate a malfunction. The anti- lock brake system is designed to help prevent lock- up of the wheels during a sudden braking or braking on slippery road surfaces. This assists in providing directional stability and steering performance of the vehicle under these circumstances. 372 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 555
speed sensors for respective wheels' turning speeds. The use of tires other than specified may fail to detect the accurate turning speed resulting in a longer stopping distance. D At the end of the anti- lock brake system activation, the brake pedal may move a little forward. 373 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 556
up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. D The light does not - 2004 Toyota Sienna | Navigation Manual - Page 557
of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. BRAKE ASSIST SYSTEM When you slam the brakes on, the brake assist system judges as an emergency - 2004 Toyota Sienna | Navigation Manual - Page 558
The brake pad wear limit indicators on your disc brakes give a warning noise when the brake pads are worn to where replacement is required. If you hear a squealing or scraping noise while driving, have the brake pads checked and replaced by your Toyota dealer as soon as possible. Expensive rotor - 2004 Toyota Sienna | Navigation Manual - Page 559
and recovery of parts from stolen vehicles. The label is designed so that once it is applied to a surface, any attempt to remove it will result You should not attempt to remove the theft prevention labels as it may violate certain state or federal laws. 377 2004 SIENNA from Aug. '04 Prod. - 2004 Toyota Sienna | Navigation Manual - Page 560
4. The location of the tread wear indicators- For details, see "Checking and replacing tires" on page 466. 5. Tire ply composition and materials- Plies mean a layer of rubber- coated parallel cords. Cords mean the strands forming the plies in the tire. 378 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 561
"TUBELESS" or "TUBE TYPE"- A tubeless tire does not have a tube inside the tire and air is directly filled in the tire. A tube type tire has a tube inside the tire and the tube maintains the summer tire. For details, see "Types of tires" on page 392. 379 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 562
Number (TIN)" on page 381. 4. The location of the tread wear indicators- For details, see "Checking and replacing tires" on page 466. 5. Load limit at maximum cold tire inflation pressure- For details, see "Checking and replacing tires" on page 466. 380 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 563
the air pressure. indicates typical DOT and Tire Identification Number (TIN). 1. "DOT" symbol 2. Tire Identification Number (TIN) 3. Tire manufacturer's identification mark 4. Tire size code 5. Manufacturer's optional tire type code 6. Manufacturing week 7. Manufacturing year 381 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 564
Name of each section of tire This illustration indicates typical tire size. 1. Tire use (P=Passenger car, T=Temporary use) 2. Section width (in Sidewall 3. Shoulder 4. Tread 5. Belt 6. Inner liner 7. Reinforcing rubber 8. Carcass 9. Rim lines 10.Bead wires 11. Chafer 2004 SIENNA from Aug. '04 Prod. - 2004 Toyota Sienna | Navigation Manual - Page 565
conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include cornering (turning) traction. 383 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 566
its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 567
if so equipped, air conditioning and additional weight accessory weight; weight vehicle capacity y weight; g and production d ti options ti weight i ht Cold tire inflation pressure Curb weight Intended outboard sidewall Maximum inflation pressure Maximum loaded vehicle weight 385 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 568
of those standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim cold tire inflation pressure recommended by a manufacturer a metal support for a tire or a tire and - 2004 Toyota Sienna | Navigation Manual - Page 569
load on the tire Weather side Meaning the load on an individual tire that is determined by distributing to each axle its share of the curb weight, accessory weight, and normal in a normally loaded vehicle 2 in front 2 in front, 1 in second seat 387 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 570
capacity: 526 kg (1160 Ib.) Total load capacity means combined weight of occupants, cargo and luggage. Tongue load is included when trailer towing. Seating capacity: 7- passenger models steering ability and braking ability, which may cause an accident. 388 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 571
the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400-750 (5x150)=650 lbs). 389 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 572
From this condition, if 3 more passengers with the combined weight of 176 kg (388 lb.) get on, the available cargo and cargo and luggage load), you have to reduce the cargo and luggage on your vehicle. For details about total load capacity, see "Vehicle load limits" on page 388. 390 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 573
SEATING CONFIGURATION VARIATION In case of removing the second seats, it is possible to load as much cargo as the weight of the removed seats. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) + (Weight of the removed second seats) 391 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 574
. For driving on snow- covered or icy roads, we recommend using snow tires. If installing snow tires, be sure to replace all four tires. 2. All season tires All season tires are designed to provide better traction in snow and to be adequate for driving in most winter conditions, as well as for use - 2004 Toyota Sienna | Navigation Manual - Page 575
...How to start the engine ...Tips for driving in various conditions ...All- wheel driving tips ...Winter driving tips ...Dinghy towing ...Trailer towing ...How to save fuel and make your vehicle last longer ... 3 394 394 395 396 397 398 398 403 393 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 576
angle. 3. Adjust the inside and outside rear view mirrors. 4. Lock all doors. 5. Fasten seat belts. How to start the engine- (a) Before cranking 1. Apply the parking brake firmly. 2. Turn off unnecessary lights and accessories. 3. Put the selector lever in "P". If you need to restart the engine - 2004 Toyota Sienna | Navigation Manual - Page 577
safely, pull to the side of the road and call a Toyota dealer for assistance. D Be careful when accelerating, upshifting, downshifting or braking on a slippery surface. Sudden acceleration or engine braking could cause the vehicle to skid or spin. 395 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 578
check your brakes for effectiveD If operating in adverse conditions frequently, vehicle maintenance should be increased. (See the separate "Scheduled Maintenance Guide" or "Owner's Manual Supplement".) D Use the manufacturer's recommended wheels. Do not use wheels of different sizes and types - 2004 Toyota Sienna | Navigation Manual - Page 579
7- 3 tells you how to visually inspect the battery. Your Toyota dealer and most service stations will be pleased to check the level of charge. NOTICE Do not use engine antifreeze or any other substitute because it may damage your vehicle's paint. 397 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 580
trailer will have an adverse effect on handling, performance, braking, durability and driving economy (fuel consumption, etc.). Your With towing package 1587 kg (3500 lb.) If towing a trailer and cargo weighing over 907 kg (2000 lb.), it is necessary to use a 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 581
weight must not exceed the Gross Vehicle Weight Rating (GVWR) indicated on the Certification Label. The gross vehicle weight is the sum special equipment installed on your vehicle. D The trailer cargo load should be distributed so that the tongue load is 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 582
weight in the back than in the removing the hitch, seal any mounting holes in the vehicle body instructions. recommends trailers with brakes ball, there is danger of the trailer wandering over into another lane. D The hitch ball and king pin should have a light coat of grease. 400 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 583
.) Also, just turn the steering wheel a little at a time, avoiding sharp or prolonged turning. Have someone guide you when backing to reduce the risk of an accident. D Make sure the trailer cargo is securely loaded so that it cannot shift. D Toyota recommends that you do not tow a trailer with - 2004 Toyota Sienna | Navigation Manual - Page 584
engine coolant temperature gauge indicates overheating, immediately turn off the air conditioning (if in use), sure you have plenty of room before changing lanes. D Remember that when making braking efficiency, do not place the transmission in "D". 402 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 585
engine braking is not required. Driving with the selector lever in "4" will reduce the fuel economy. (For details, see "Automatic transmission" on page 179 in Section 1- 6.) D Accelerate slowly and smoothly. Avoid jackrabbit starts. Get into high gear as quickly as possible. 403 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 586
drive under severe conditions, see that your vehicle receives more frequent maintenance. (For scheduled maintenance information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement".) D Avoid heavy traffic or traffic jams D Do not rest your foot on the brake pedal. This - 2004 Toyota Sienna | Navigation Manual - Page 587
...If you lose your keys ...If you lose your wireless remote control transmitter ...If you cannot shift automatic transmission selector lever ...If you cannot operate back door opener ... 4 406 409 409 410 411 426 427 429 429 429 430 405 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 588
and try again. If the engine still will not start, it needs adjustment or repair. Call a Toyota dealer or qualified repair shop for assistance. NOTICE Do not crank for more than 30 seconds at a time. This may overheat the starter and wiring systems. 406 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 589
touching. Turn off all unnecessary lights and accessories. When boosting, use the battery of matching or higher quality. Any other battery may be difficult to jump start with. If jump starting is difficult, charge the battery for several minutes. 2. If required, remove all the vent plugs from the - 2004 Toyota Sienna | Navigation Manual - Page 590
to or near any part that moves when the engine is cranked. CAUTION When making the connections, to avoid serious injury, do not lean over the battery or accidentally let the jumper cables or clamps touch anything except the correct battery terminals or the ground. 408 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 591
cable and then the positive cable. 7. Carefully dispose of the battery cover cloths-they may now contain sulfuric acid. 8. If removed, replace all the battery vent plugs. If the cause of your battery discharging is not apparent (for example, lights left on), you should have it checked at your Toyota - 2004 Toyota Sienna | Navigation Manual - Page 592
. Put the transmission in "P" and apply the parking brake. Turn off the air conditioning if it is being used. 2. If coolant or remove the radiator cap when the engine and radiator are hot. Serious injury could result from scalding hot fluid and steam blown out under pressure. 410 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 593
brake and put the transmission in "P". 4. Have everyone get out of the vehicle on the side away from traffic. 5. Read the following instructions must be replaced. If you are not sure, consult your Toyota dealer. Do not use the repaired tire. 411 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 594
as possible, observing the following instructions: D Decelerate as soon as possible to the lowest appropriate speed that conditions permit. Do not drive for longer brakes, causing death or serious injury. D Do not replace or repair the tire by yourself. When the tires must be replaced or repaired, - 2004 Toyota Sienna | Navigation Manual - Page 595
to 4800 km (3000 miles) depending on road conditions and your driving habits. When tread wear indicators appear on the tire, replace the tire. See also the tire information on page automatic car wash as the vehicle may get caught, resulting in damage. 413 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 596
familiarize yourself with the use of the jack, each of the tools and their storage locations. To remove the tools, turn the knob counterclockwise and remove the cover. To remove the jack, turn the jack joint by hand until the jack becomes free. 414 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 597
joint until the jack base fits securely with the vehicle body. This prevents the jack from flying forward during a collision or sudden stop. To remove side sliding door and you will find the flap on the floor. Pull back the flap to find the spare tire clamp bolt. 415 2004 SIENNA from Aug. ' - 2004 Toyota Sienna | Navigation Manual - Page 598
hitting the under body of the vehicle during completely to the ground, remove the holding bracket. When part, to prevent it from flying forward during a collision or sudden braking. As the tire carrier is designed for the compact spare tire, the standard tire cannot be stored there. 416 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 599
familiarize yourself with the use of the jack, each of the tools and their storage locations. To remove the tools, turn the knob counterclockwise and remove the cover. To remove the jack, turn the jack joint by hand until the jack becomes free. 417 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 600
make sure the wrench is securely held. To 1. 2. 3. 4. remove the spare tire: Remove the lid. Loosen the nut and remove it. Remove the spare tire cover. Loosen the bolt, then remove the bolt and spacer. Then take the spare tire out of the vehicle. 418 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 601
the rear wheels. 3. Remove the wheel ornament. Pry off the wheel ornament, using the beveled end of the wheel nut wrench as shown. CAUTION Do not try to pull off the ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury. 419 2004 SIENNA from Aug. '04 Prod - 2004 Toyota Sienna | Navigation Manual - Page 602
the possibility of personal injury: D Follow jacking instructions. D Do not put any part of your body under the vehicle supported by the jack. Otherwise, personal injury may occur nut. Do not remove the nuts yet-just unscrew them about one- half turn. 420 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 603
, turn off the power sliding door system and the power back door system, and close the sliding door and the back door completely. 5. Position the jack at the correct jack point as shown. Make sure the jack is positioned on a level and solid place. 421 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 604
vehicle when the vehicle is supported by the jack alone. -Changing wheels 6. After making sure double- check that it is properly positioned. 7. Remove the wheel nuts and change tires. Lift the flat tire straight off and back over the other bolts. 422 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 605
is oil or grease on any bolt or nut, clean it. Before putting on wheels, remove any corrosion on the mounting surfaces with a wire brush or such. Installation of wheels you can by hand. Press back on the tire and see if you can tighten them more. 423 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 606
When lowering the vehicle, make sure all portions of your body and all other persons around will not be injured as to 103 N·m (10.5 kgf·m, 76 ft·lbf), as soon as possible after changing wheels. Otherwise, the nuts may loosen and the wheels may fall off, which 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 607
-After changing wheels CAUTION Take due care in handling the ornament to avoid unexpected personal injury. 11. Check the air pressure of the replaced tire. Adjust the air pressure to the specification designated on page 491 in Section 8. If the pressure is lower, drive slowly to the nearest service - 2004 Toyota Sienna | Navigation Manual - Page 608
to spin enough to remove the vehicle from the obstruction. (For details, see "Traction control system (two- wheel drive models)" on page 182 in Section 1- 6.) NOTICE If you rock your vehicle, observe the following precautions to prevent damage to the transmission and other parts. z Do not depress - 2004 Toyota Sienna | Navigation Manual - Page 609
necessary, we recommend you to have it done by your Toyota dealer or a commercial tow truck service. In consultation with them, have your vehicle towed using either (a) or (b). Proper equipment will Two- wheel drive models All- wheel drive models 427 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 610
bumper and/or underbody of the towed vehicle will be damaged during towing. From rear- Use a towing dolly under the front wheels. All models- (c) Towing with sling type truck NOTICE Do not tow with sling type truck, either from the front or rear. This may cause body damage. 428 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 611
whole engine immobilizer system must be replaced. See the brake pedal is depressed, use the shift lock override button as follows: 1. Turn the ignition key to position. Make sure the brake is applied. "LOCK" parking 2. Pry up the cover with a flat- bladed screwdriver or equivalent. 429 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 612
following procedure. 1. Remove the cover on the back door trim. Without power back door system 6. Start the engine. For your safety, keep the brake pedal depressed. Be sure to have the system checked by your Toyota dealer as soon as possible. With power back door system 430 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 613
04 SIENNA_U (L/O 0408) 2. Pull the lever with the back door motor, open the back door. Be sure to have the back door opener checked/repaired by your Toyota dealer. 431 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 614
04 SIENNA_U (L/O 0408) 432 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 615
04 SIENNA_U (L/O 0408) SECTION CORROSION PREVENTION AND APPEARANCE CARE Corrosion prevention and appearance care 5 Protecting your Toyota from corrosion ...434 Washing and waxing your Toyota ...435 Cleaning the interior ...437 433 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 616
wet the mud and debris without removing. The lower edge of doors, rocker panels and frame members have body shop make the repair. Care is especially important if you live in particular areas or operate your vehicle under certain environmental conditions 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 617
not rub hard-let the soap and water remove the dirt. Fuel filler door: Do not apply water (highpressure car wash, for example) at or near the fuel tank inlet with the fuel filler door opened. If the water enters the air vent, you may experience trouble with refueling or rough engine idling. Plastic - 2004 Toyota Sienna | Navigation Manual - Page 618
through an automatic car wash. z When your vehicle goes through an automatic car wash, make sure the power sliding door and power back door system are off. NOTICE If a nozzle becomes blocked, do not try to clear it with a pin or other object. The nozzle will be damaged. 436 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 619
. Water may get into audio components or other electrical components above or under the floor carpet (or mat) and cause a malfunction; and it may cause body corrosion. NOTICE Do not use solvent, thinner, gasoline or window cleaner on the interior. 437 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 620
are cleaning, check the belts for excessive wear, fraying, or cuts. NOTICE When cleaning the inside of the rear window, be careful not to scratch or damage the heater wires or connectors. Air conditioning control panel, car audio, instrument panel, console panel, and switches Use a soft damp cloth - 2004 Toyota Sienna | Navigation Manual - Page 621
discoloration or staining. If you have any questions about the cleaning of your Toyota, your local Toyota dealer will be pleased to answer them. 439 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 622
04 SIENNA_U (L/O 0408) 440 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 623
maintenance ...Does your vehicle need repairing? ...Emissions Inspection and Maintenance (I/M) programs ... 6 442 443 445 446 For scheduled maintenance information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". 441 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 624
those required to be serviced at regular intervals. For details of your maintenance schedule, read the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". It is recommended that any replacement parts used for maintenance or for the repair of the emission control system be Toyota supplied - 2004 Toyota Sienna | Navigation Manual - Page 625
service shop immediately. It is recommended that any problem you notice be brought to the attention of your dealer or the qualified service longer life of the battery, however, see page 476 in Section 7- 3 for additional information. Brake fluid level Make sure the brake fluid level is correct. See - 2004 Toyota Sienna | Navigation Manual - Page 626
, stop lights, tail lights, turn signal lights, and other lights are all working. Check headlight aim. Service reminder indicators and warning buzzers Check that all service reminder indicators and warning buzzers function properly. Steering wheel Be alert for changes in steering condition, such - 2004 Toyota Sienna | Navigation Manual - Page 627
information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement".) See page 468 in Section 7- 2 for additional information. Be on the alert for changes in performance, sounds, and visual tip- offs that indicate service is needed. Some important clues are as follows - 2004 Toyota Sienna | Navigation Manual - Page 628
the emission control system. When the OBD system determines that a problem exists somewhere in the emission control system, the malfunction indicator lamp comes on. In this case, your vehicle may not pass the I/M test and need to be repaired. Contact your Toyota dealer to service the vehicle. Even - 2004 Toyota Sienna | Navigation Manual - Page 629
04 SIENNA_U (L/O 0408) SECTION DO- IT- YOURSELF MAINTENANCE Introduction 7- 1 448 449 450 451 453 Engine compartment overview ...Fuse locations ...Do- it- yourself service precautions ...Positioning the jack ...Parts and tools ... 447 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 630
1. Power steering fluid reservoir 2. Windshield and rear window washer fluid tank 3. Engine oil level dipstick 4. Engine coolant reservoir 5. Engine oil filler cap 6. Brake fluid reservoir 7. Fuse block 8. Battery 9. Electric cooling fans 10. Condenser 11. Radiator 448 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 631
04 SIENNA_U (L/O 0408) Fuse locations Spare fuses Spare fuses 449 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 632
or other solid supports. D Dispose of used oil and filter only in a safe and acceptable manner. Do not dispose of used oil and filter in household trash, in sewers or onto the ground. Call your dealer or a service station for information concerning recycling or disposal. 450 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 633
tipped spark plugs by cleaning or regapping. z Do not overfill automatic transmission fluid and power steering fluid, or the transmission and power steering could be damaged. z Do not drive with the air cleaner filter removed, or excessive engine wear could result. Also backfiring could cause a fire - 2004 Toyota Sienna | Navigation Manual - Page 634
Follow jacking instructions. D Do not put any part of your body under the vehicle supported by the supported by the jack. D Stop the vehicle on a level firm ground, firmly set the parking brake supported by the jack alone; use vehicle support stands. 452 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 635
ENGINE COOLANT D Rag or paper towel D Funnel (only for adding fluid) CHECKING BATTERY CONDITION Tools: D Bulb with same number and wattage rating as original (See charts in "Replacing light bulbs" on page 480 in Section 7- 3.) Tools: Parts (if level is low): D "Toyota Genuine Long Life Coolant - 2004 Toyota Sienna | Navigation Manual - Page 636
04 SIENNA_U (L/O 0408) 454 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 637
the engine coolant level ...Checking the radiator and condenser ...Checking and replacing the air conditioning filter ...Checking brake fluid ...Checking power steering fluid ...Checking tire inflation pressure ...Checking and replacing tires ...Rotating tires ...Run- flat tires ...Installing snow - 2004 Toyota Sienna | Navigation Manual - Page 638
few minutes for the oil to drain back into the bottom of the engine. already in the engine. Remove the oil filler cap indicated below for reference. When the level reaches within the correct range, install the filler cap hand- tight. Oil quantity, L (qt., Imp. qt.): 1.5 (1.6, 1.3) 456 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 639
, SAE 10W- 30 may be used. However, it should be replaced with SAE 5W- 30 at the next oil change. API service symbol Outside temperature SAE 5W- 30 is the best choice for good fuel economy and good starting in cold weather. ILSAC certification mark 457 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 640
use. The API Service Symbol is located , indicates that system. Visually check the radiator, hoses, engine coolant filler cap, radiator cap and drain cock and water pump. If you can find no leak, have your Toyota dealer test the cap pressure and check for leaks in the cooling system. 458 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 641
the system, as it is an ethylene- glycol based premium antifreeze coolant with excellent corrosion protection properties that has been specifically formulated for use in Toyota vehicles. Please contact your Toyota dealer for further details about "Toyota Genuine Long Life Coolant". 459 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 642
and condenser If any of the above parts are extremely dirty or you are not sure of their condition, take your vehicle to a Toyota dealer. Checking and replacing the air conditioning filter To maintain the air conditioning efficiency, inspect and replace the air conditioning filter according - 2004 Toyota Sienna | Navigation Manual - Page 643
04 SIENNA_U (L/O 0408) 1. Open the glove box, and slide off the damper as shown. 2. Push in each side of the glove box to disconnect the claws. 3. Remove the filter case from the filter outlet as shown in the illustration. 461 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 644
The use of air conditioning with the air filter removed may cause deteriorated dustproof performance and then affect air conditioning performance. NOTICE If you spill some of the fluid, be sure to wash it off with water to prevent it from damaging the parts or paint. 462 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 645
when the fluid is cold (about room temperature, 10_C-30_C or 50_F-85_F) if the engine has not been run for about five hours. CAUTION The reservoir tank may be hot so be careful not to burn yourself. NOTICE Avoid overfilling, or the power steering could be damaged. Type A 463 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 646
sizes and the combined weight of occupants and cargo following instructions for air to the compact spare tire. The smaller tire size can gain pressure very quickly. Add compressed air in small quantities and check the pressure often until it reaches the specified pressure. Type B 464 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 647
have it checked by your Toyota dealer. INSPECTION AND ADJUSTMENT PROCEDURE 1. Remove the tire valve cap. 2. Press the tip of the tire pressure gauge compressed air from the valve. In case of applying too much air, press the center of the valve and release the air to adjust. 465 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 648
road hazards Tread wear indicator CHECKING YOUR TIRES Check the tire's tread for tread wear indicators. If the indicators show, replace the tires. The location of tread wear indicators is shown by the "TWI" or "∆ " marks, etc., molded on the sidewall of each tire. 466 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 649
the fabric, or bulges indicating internal damage, the tire should be replaced. If a tire often goes flat or cannot be properly repaired due to the size or location of a cut or other damage, it should be replaced. If you are not sure, consult with your Toyota dealer. If air loss occurs while driving - 2004 Toyota Sienna | Navigation Manual - Page 650
"Scheduled Maintenance Guide" or "Owner's Manual Supplement".) However, the most appropriate timing for tire rotation may vary according to your driving habits and road surface conditions. See "If you have a flat tire" on page 411 in Section 4 for tire change procedure. 468 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 651
or when the tire pressure is below 100 kPa (1.0 kgf/cm2 or bar, 15 psi), the tire must be replaced. If you are not sure, consult your Toyota dealer. Do not use the repaired tire. There is an "RFT" or "DSST" mark on the sidewall of the run- flat tire. If you - 2004 Toyota Sienna | Navigation Manual - Page 652
instructions: D Decelerate as soon as possible to the lowest appropriate speed that conditions brakes, causing death or serious injury. D Do not replace or repair the tire by yourself. When the tires must be replaced or repaired, consult your Toyota dealer or authorized tire dealer. 470 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 653
tires, body, suspension car wash as the vehicle may get caught, resulting in damage. WHEN TO CHAINS USE SNOW TIRES OR CAUTION Observe the following instructions sizes, construction or tread patterns, as this may cause dangerous handling characteristics resulting in loss of control. 471 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 654
the instructions of the chain manufacturer. If wheel covers are used, they will be scratched by the chain band, so remove the covers not replace or repair the tire by yourself. When the tires must be replaced or repaired, consult your Toyota dealer or authorized tire dealer. 472 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 655
A wheel of a different size or type may adversely affect handling, wheel and bearing life, brake cooling, speedometer/odometer calibration, stopping ability, headlight aim, bumper height, vehicle ground clearance, and tire or snow chain clearance to the body and chassis. Replacement with used wheels - 2004 Toyota Sienna | Navigation Manual - Page 656
vehicle the first 1600 km (1000 miles). D If you have changed your wheel nuts are 1600 km (1000 rotated, repaired, or tires, check that the still tight after driving miles). D check your aluminum wheels for damage. If damaged, replace immediately. 474 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 657
SIENNA_U (L/O 0408) SECTION DO- IT- YOURSELF MAINTENANCE Electrical components 7- 3 476 477 478 479 480 Checking battery condition ...Battery recharging precautions ...Checking and replacing fuses ...Adding washer fluid ...Replacing light bulbs ... 475 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 658
children away from the battery. EMERGENCY MEASURES D If electrolyte gets in your eyes, flush your eyes with clean water immediately and get immediate medical attention. If possible, continue to apply water with a sponge or cloth while en route to the medical office. 476 2004 SIENNA from Aug. '04 - 2004 Toyota Sienna | Navigation Manual - Page 659
cases, you should normalize each system. To normalize them, see "Power windows" on page 42, "Power sliding doors" on page 27, "Power back door" on page 36 and "Electric moon roof" on page 53 in Section 1- 2. Check the battery condition by the indicator color. Indicator color Type A Green Type B Blue - 2004 Toyota Sienna | Navigation Manual - Page 660
the problem. The lid of the fuse box shows the name of the circuit for each fuse. See page 492 in Section 8 of this manual for the functions controlled by each circuit. Good Type B Blown Type D Type C and D-When any of the fuses are blown, contact your Toyota dealer. 478 2004 SIENNA from - 2004 Toyota Sienna | Navigation Manual - Page 661
vehicle for emergencies. If the new fuse immediately blows out, there is a problem with the electrical system. Have your Toyota dealer correct it as soon as possible. If any washer does windshield washer light comes on, the empty. Add washer not work or the low fluid level warning washer tank may be - 2004 Toyota Sienna | Navigation Manual - Page 662
rear light bulbs, turn off the power back door system to prevent an unexpected serious injury. Vehicles with discharge headlights- D Do not touch the high voltage socket when the headlight turns on. 20000 V is momentarily generated and may cause severe injury by electric shock. 480 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 663
fog lights Front turn signal lights Parking and front side marker lights Rear turn signal lights Stop/tail and rear side marker lights Tail lights Back- up lights License plate lights Front personal lights Rear personal lights Luggage compartment light Vanity lights Door courtesy lights Bulb No - 2004 Toyota Sienna | Navigation Manual - Page 664
the lock release. If the connector is tight, wiggle it. 3. Plug in a new bulb into the connector and install it into the mounting hole. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact your Toyota dealer. 482 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 665
If either the left or right front fog light bulbs burns out, contact your Toyota dealer. -Front turn signal lights -Parking and front side marker lights NOTICE Do not try to replace the front fog light bulbs by yourself. You may damage the vehicle. 483 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 666
stop/tail and rear side marker lights -Tail and back- up lights Remove the bolts. a: Rear turn signal light b: Stop/tail and rear side marker light Remove the strap with a Phillips- head screwdriver. Pull and hold the tab and remove the bulb unit. 484 2004 SIENNA from Aug. '04 Prod. (OM45422U - 2004 Toyota Sienna | Navigation Manual - Page 667
04 SIENNA_U (L/O 0408) -License plate lights NOTICE When installing the back door trim, be careful not to jam any wire harness and connector. Otherwise, they may be damaged. Remove the strap with a Phillips- head screwdriver. a: Tail light b: Back- up light 485 2004 SIENNA from Aug. '04 Prod. ( - 2004 Toyota Sienna | Navigation Manual - Page 668
04 SIENNA_U (L/O 0408) NOTICE When installing the back door trim, be careful not to jam any wire harness and connector. Otherwise, they may be damaged. 486 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 669
04 SIENNA_U (L/O 0408) SECTION SPECIFICATIONS Specifications Dimensions and weights ...Engine ...Fuel ...Service specifications ...Tires ...Fuses ... 8 488 488 489 489 491 492 487 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 670
04 SIENNA_U (L/O 0408) Dimensions and weights Overall length Overall width Overall height Wheelbase Front tread Rear tread Vehicle capacity weight (occupants + luggage) Towing capacity (trailer weight + cargo weight) ∗1 : ∗2 With P225/60R17 tires 488 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 671
details. COOLING SYSTEM Total capacity, L (qt., Imp. qt.): 11.7 (12.4, 10.3) Coolant type: "Toyota Genuine Long Life Coolant" is used in your Toyota vehicle. In order to avoid technical problems, we strongly recommend using "Toyota Genuine Long Life Coolant" or equivalent. 489 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 672
if your vehicle is driven under one of the Special Operating Conditions listed in your "Scheduled Maintenance Guide" or "Owner's Manual Supplement". When changing the automatic transmission fluid, use only "Toyota Genuine ATF Type T- IV" (ATF JWS3309 or NWS6500) to aid in assuring optimum transaxle - 2004 Toyota Sienna | Navigation Manual - Page 673
steering fluid type: Automatic transmission fluid DEXRONr II or III Tire size and cold tire inflation pressure: Tire size P215/ replacing tires or replacing wheels), see "Checking tire inflation pressure" through "Aluminum wheel precautions", pages 463 through 474, in Section 7- 2. 491 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 674
flashers 9. RAD NO.3 30 A: Audio system 10. A/F 25 A: A/F sensor 11. HORN 10 A: Horns 12. EFI NO.2 10 A: Multiport fuel injection system/sequential multiport fuel injection system 6. H- LP LL 15 A: Left- hand headlight (low beam), front fog lights 492 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 675
system, power sliding door, power back door, multi- information display, rear window defogger, emergency flashers, instrument panel lights, steering switch lights 40. TAIL 10 A: Stop/tail lights, license plate lights, parking lights, side marker lights 41. S/ROOF 25 A: Electronic moon roof 42. AC - 2004 Toyota Sienna | Navigation Manual - Page 676
back door 60. R- PSD 30 A: Right side power sliding door 61. L- PSD 30 A: Left side power sliding door 62. RR A/C 40 A: Rear air conditioning system 63. DEF 40 A: Rear "MIR HTR" fuse window defogger, 64. ABS1 50 A: Anti- lock brake system, traction control system, vehicle stability control system - 2004 Toyota Sienna | Navigation Manual - Page 677
04 SIENNA_U (L/O 0408) SECTION Reporting safety defects for U.S. owners 9 REPORTING SAFETY DEFECTS FOR U.S. OWNERS Reporting safety defects for U.S. owners ...496 495 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 678
it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To contact NHTSA, you other information about motor vehicle safety from the Hotline. 496 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 679
and have all the occupants follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble- free motoring. For important information about this manual and your Toyota, read the following pages carefully. When it comes to service, remember that your Toyota dealer knows - 2004 Toyota Sienna | Navigation Manual - Page 680
or damage. The types of warnings, what they look like, and how they are used in this manual are explained as follows: Safety symbol CAUTION This is a injury to informed order to others. warning against risk of damage to your vehicle and its equipment. ii 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 681
". D Battery posts, terminals and related accessories contain lead and lead compounds. Wash your hands after handling. Used engine oil contains chemicals that have caused cancer in laboratory animals. Always protect your skin by washing thoroughly with soap and water. iii 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 682
cruise control system, antilock brake system, traction control system, vehicle stability control system, SRS airbag system and seat belt pretensioner system, be sure to check with your Toyota dealer for precautionary measures or special instructions regarding installation. iv 2004 SIENNA from Aug - 2004 Toyota Sienna | Navigation Manual - Page 683
may result in the deterioration of steering ability and braking ability, leading to an accident. Check the tire systems of the SRS airbag and seat belt pretensioner removed and disposed of by the qualified service shop or by your Toyota dealer before you dispose of your vehicle. v 2004 SIENNA - 2004 Toyota Sienna | Navigation Manual - Page 684
04 SIENNA_U (L/O 0408) vi 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 685
04 SIENNA_U (L/O 0408) gU−3 Quick index D If a service reminder indicator or warning buzzer comes on ...167 D If your vehicle will not Tire inflation pressure: See page 491. Publication No. OM45422U Part No. 01999-45422 Printed in Japan 01- 0408- 00 C 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 686
order is to maintain it properly from the moment you drive it off the showroom floor. The Toyota authorized Repair Manual is packed with literally everything you need to know to perform your own maintenance in virtually every area of your new vehicle. 2004 SIENNA from Aug. '04 Prod. (OM45422U) - 2004 Toyota Sienna | Navigation Manual - Page 687
Areas covered include such things as spark plug re− placement, valve clearance adjustment and engine oil and filter replacement. Where to obtain the Repair Manual The repair manual for SIENNA, written in Eng− lish, may be purchased as applicable from any Toyota dealer. Pub. Name: 2004 SIENNA Repair - 2004 Toyota Sienna | Navigation Manual - Page 688
04 SIENNA_U (L/O 0408) WE REALLY CARE ABOUT YOU Ċ PLEASE BUCKLE UP Toyota has made a special effort to encourage use of seat belts. Toyota belts are: D Comfortable D Easy to use D Convenient We encourage you to use your belts every time you drive. U 2004 SIENNA from Aug. '04 Prod. (OM45422U)