2008 Volvo S80 Owner's Manual - Page 87

Daytime running lights can be deactivated by an authorized Volvo workshop. NOTE The use of daytime running lights is mandatory in Canada. Continuous high beams cannot be activated when the headlight switch is in position flash will function in these positions. High beam flash Move the lever toward the steering wheel to position High/low beam headlights Continuous high beams Set the ignition to mode II. With the light switch in position , pull the turn signal lever toward the steering wheel to position to toggle or . High beam . The high beams come on until the lever is released. between high and low beams (this also applies on models equipped with the optional Active Bi-Xenon® headlights). The symbol illuminates in the instrument panel to indicate that the high beams are on. 90 03 Your driving environment Lighting Active Bi-Xenon® Lights (ABL)-option When the ABL function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration). This function is activated automatically when the engine is started and can be deactivated/reactivated by pressing the ABL button in the center console. This button lights up when the ABL function is activated, and will flash if there is a fault in the system. NOTE This function is only active in twilight or dark conditions, and only when the vehicle is in motion.