2009 Volvo V50 Owner's Manual - Page 245
2009 Volvo V50 Manual
Page 245 highlights
10 Audio Radio functions To return to the Auto-store mode, press the AUTO button briefly and select a stored station by pressing one of the preset buttons (2). 2. Press SCAN to activate the function. SCAN is shown in the display. 3. Press the SCAN or EXIT button to deactivate the scan function and listen to the selected station. Listening to satellite radio The Sirius satellite system consists of a number of high elevation satellites in geosynchronous orbit. 10 Saving auto-stored stations in the preset memory An auto-stored station can be saved in the memory for manually preset stations. 1. Press AUTO (7) briefly. > Auto is displayed. 2. Press one of the preset buttons (2) under which the station is to be stored. Hold down the button until STATION STORED is displayed. The radio will then exit auto-store mode and the stored station can be selected by pressing the preset button. NOTE Storing a station found with SCAN A station can be stored as a preset while the SCAN function is activated. • • Press one of the preset buttons (2) under which the station is to be stored. Hold down the button until STATION STORED is displayed. The SCAN function will be deactivated and the station can be selected by pressing the preset button. The digital signals from the Sirius satellites are line-of-sight, which means that physical obstructions such as bridges, tunnels, etc, may temporarily interfere with signal reception. Avoid any obstructions, such as metallic objects transported on roof racks or in a ski box, or other antennas that may impede signals from the SIRIUS satellites. • Radio text Scanning SCAN (4) automatically searches through the selected waveband for strong AM or FM stations. When the radio finds a station, that station will be played for approximately 8 seconds, after which scanning resumes. Certain stations broadcast program information, which can be shown in the display. To start this function: 1. Select FM1 or FM2 and press the MENU button. 2. Press ENTER. 3. Select RADIOTEXT in the menu and press ENTER. To deactivate this function, select RADIOTEXT again and press ENTER. Selecting Sirius radio mode 1. Press Power to switch on the audio system (see page 244 for information on the standard radio functions). 2. Press the MODE button repeatedly until Sirius 1 or 2 is displayed. Activating Sirius radio 1. Tune to a satellite channel that has no audio, which means that the channel is unsubscribed and the text "Call 888-539SIRIUS TO SUBSCRIBE" is displayed Activating/deactivating SCAN 1. Select radio mode using the AM/FM button (2). 245