2009 Volvo V50 Owner's Manual - Page 269
2009 Volvo V50 Manual
Page 269 highlights
11 Specifications Engine oil Oil specifications Engine oil must meet the minimum ILSAC specification GF-4, API SL, or ACEA A1/B1. Lower quality oils may not offer the same fuel economy, engine performance, or engine protection. Volume: 6.1 US qts (5.8 liters). Volume between the MIN and Max marks on the dipstick: approximately 1.4 US qts (1.3 liters). G023491 Oil viscosity (stable ambient temperatures) recommended for driving in areas of sustained temperature extremes (hot or cold), when towing a trailer over long distances, and for prolonged driving in mountainous areas. American Petroleum Institute (API) symbol 11 Volvo recommends Castrol. Depending on your driving habits, premium or synthetic oils may provide superior fuel economy and engine protection. Consult your Volvo retailer or a trained and qualified Volvo service technician for recommendations on premium or synthetic oils. Oil additives must not be used. Operation in hot climates When temperatures exceed 104° F (40° C) in your area, Volvo recommends, for the protection of your engine, that you use a heavier weight oil, such as such as SAE 5W-40 or 0W-40. See the viscosity chart. G022917 The API Service Symbol "donut" is divided into three parts: NOTE Synthetic oil is not used when the oil is changed at the normal service intervals. This oil is only used at customer request, at additional charge. Please consult a trained and qualified Volvo service technician. Operation in temperate climates Incorrect viscosity oil can shorten engine life. Under normal use when temperatures do not exceed 104° F (40° C), SAE 5W-30 will provide good fuel economy and engine protection. See the viscosity chart. • The upper section describes the oil's performance level. • The center identifies the oil's viscosity. • The lower section indicates whether the oil has demonstrated energy-conserving properties in a standard test in comparison to a reference oil. Extreme engine operation Synthetic oils meeting SAE 0W-30 or 0W-40 and complying with oil quality requirements are 269