2010 Volvo C70 Owner's Manual - Page 241
2010 Volvo C70 Manual
Page 241 highlights
10 Audio Audio functions intended to enable the user to adapt sound reproduction to his/her personal preferences. 1. Press SOUND (5). Press this button repeatedly until you come to the setting that you wish to change. 2. Turn the TUNING dial (4) to make the desired setting. The following settings can be made: Surround sound Surround sound settings are used to balance sound levels throughout the vehicle. Surround settings for the various sound sources are made sepaG021216 3. Select Surround FM/AM/CD/AUX and press ENTER. 4. Select Pro logic II, 3-channel stereo or Off and press ENTER. 10 rately. Equalizer Front/Rear This function is used to fine-tune the sound level for different frequencies separately. NOTE • • BASS-set the bass level TREBLE-set the treble level BALANCE-set the left/right sound balance FADER-set the front/rear sound balance SUBWOOFER (accessory)-set the level for the subwoofer (bass speaker) CENTER-make settings for the center speaker SURROUND-make settings for surround sound Dolby Surround Pro Logic II is only available on the Premium Sound system. When listening to FM radio stations, Dolby Surround Pro Logic II functions best in areas with strong reception. If reception is weak, selecting 2 or 3channel stereo may provide better sound quality. NOTE This function is only available on certain sound systems. To adjust the equalizer settings: 1. Press MENU followed by ENTER. 2. Select AUDIO SETTINGS in the menu and press ENTER. 3. Select Equalizer Front/Rear and press ENTER. The column in the display indicates the sound level for the current frequency. The Dolby symbol will be appear in the display when Dolby Pro Logic II is activated. There are three alternative settings: Subwoofer (accessory) To switch the subwoofer on or off: 1. Press MENU followed by ENTER. 2. Select AUDIO SETTINGS and press ENTER. 3. Select SUBWOOFER and press ENTER. • Pro Logic II • 3-channel • Off (normal 2-channel stereo) Activating/deactivating Surround sound 1. Press MENU followed by ENTER. 2. Select AUDIO SETTINGS in the menu and press ENTER. • Adjust the level with the TUNING dial (4), or use the Up/Down arrows. Additional frequencies can be selected with the Right/ Left arrows. • Save the settings by pressing ENTER or exit without saving by pressing EXIT. `` 241