2013 Volvo C30 Owner's Manual - Page 203
2013 Volvo C30 Manual
Page 203 highlights
07 Wheels and tires Changing a wheel NOTE The jack provided with your vehicle is intended to be used only in temporary situations such as changing wheels in the event of a flat tire. Only the jack that came with your particular model should be used to lift the vehicle. If the vehicle needs to be lifted more frequently or for a prolonged period, using a garage jack or hoist is recommended. Always follow this device's instructions for use. On vehicles equipped with the tire sealing system, the jack should be cranked down as far as possible and returned to its storage position in the foam block. WARNING The jack and any tools should always be returned to their proper storage compartments after use to help keep them securely in place in the event of sudden braking, etc. Installing the wheel 1. Clean the contact surfaces between the wheel and hub. 2. Lift the wheel and place it on the hub. 3. Install the wheel nuts and hand-tighten them. Using the lug wrench, tighten crosswise until all nuts are snug. 4. Lower the vehicle to the ground and alternately tighten the bolts crosswise to 81 ft. lbs. (110 Nm) or 96 ft. lbs. (130 Nm), depending on the type of wheel/wheel nuts used on your vehicle. See also 199 for additional information. 5. Install the wheel cover (where applicable). See page 197 for information on returning the jack and tools to their proper storage positions. 07 201