2002 Yamaha Motorsports Virago 250 Owners Manual - Page 49

2002 Yamaha Motorsports Virago 250 Manual

Get 2002 Yamaha Motorsports Virago 250 PDF manuals and user guides View all 2002 Yamaha Motorsports Virago 250 manuals

Page 49 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR Recommended engine oil: See page 8-1. Oil quantity: With oil filter element replacement: 1.6 L (1.4 Imp qt, 1.7 US qt) Without oil filter element replacement: 1.4 L (1.2 Imp qt, 1.5 US qt) Total amount (dry engine): 1.8 L (1.6 Imp qt, 1.9 US qt) EC000072 1. Bolt (× 3) 2. Oil filter element cover 1. Oil filter element 2. O-ring 6 4. Remove the oil filter element cover by removing the bolts. 5. Remove and replace the oil filter element and O-ring. 6. Install the oil filter element cover by installing the bolts, then tightening them to the specified torque. Tightening torque: Oil filter element cover bolt: 7 Nm (0.7 m·kgf, 5.1 ft·lb) NOTE: Make sure that the O-ring is properly seated. @ @ 7. Install the engine oil drain bolt, and then tighten it to the specified torque. @ Tightening torque: Engine oil drain bolt: 34 Nm (3.4 m·kgf, 25 ft·lb) 8. Add the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. CAUTION: q In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives with the oil or use oils of a higher grade than "CD". In addition, do not use oils labeled "ENERGY CONSERVING II" or higher. q Make sure that no foreign material enters the crankcase. @ 6-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
PERIODIC MAINTENANCE AND MINOR REPAIR
6-10
6
4.
Remove the oil filter element cover
by removing the bolts.
5.
Remove and replace the oil filter
element and O-ring.
6.
Install the oil filter element cover
by installing the bolts, then tighten-
ing them to the specified torque.
NOTE:
@
Make sure that the O-ring is properly
seated.
@
7.
Install the engine oil drain bolt, and
then tighten it to the specified
torque.
8. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil filler
cap.
EC000072
CAUTION:
@
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives with
the oil or use oils of a higher
grade than “CD”. In addition, do
not use oils labeled “ENERGY
CONSERVING II” or higher.
●
Make sure that no foreign mate-
rial enters the crankcase.
@
1.
Bolt (
×
3)
2.
Oil filter element cover
Tightening torque:
Oil filter element cover bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lb)
1.
Oil filter element
2. O-ring
Tightening torque:
Engine oil drain bolt:
34 Nm (3.4 m·kgf, 25 ft·lb)
Recommended engine oil:
See page 8-1.
Oil quantity:
With oil filter element
replacement:
1.6 L (1.4 Imp qt, 1.7 US qt)
Without oil filter element
replacement:
1.4 L (1.2 Imp qt, 1.5 US qt)
Total amount (dry engine):
1.8 L (1.6 Imp qt, 1.9 US qt)