2002 Yamaha Motorsports Virago 250 Owners Manual - Page 60
2002 Yamaha Motorsports Virago 250 Manual
Page 60 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR Rear Observe these precautions: q When checking the fluid level, make sure that the top of the master cylinder is level by turning the handlebars. q Use only the recommended quality brake fluid, otherwise the rubber seals may deteriorate, causing leakage and poor braking performance. EAU00732 EAU00727 1. Brake shoe wear indicator 2. Brake shoe wear limit line 1. Minimum level mark Rear brake shoes The rear brake is provided with a wear indicator, which allows you to check the brake shoe wear without having to disassemble the brake. To check the brake shoe wear, check the position of the wear indicator while applying the brake. If a brake shoe has worn to the point that the wear indicator reaches the wear limit line, have a Yamaha dealer replace the brake shoes as a set. Checking the brake fluid level Insufficient brake fluid may allow air to enter the brake system, possibly causing it to become ineffective. Before riding, check that the brake fluid is above the minimum level mark and replenish if necessary. A low brake fluid level may indicate worn brake pads and/or brake system leakage. If the brake level is low, be sure to check the brake pads for wear and the brake system for leakage. @ Recommended brake fluid: DOT 4 NOTE: If DOT 4 is not available, DOT 3 can be used. @ 6 Refill with the same type of brake fluid. Mixing fluids may result in a harmful chemical reaction and lead to poor braking performance. q Be careful that water does not enter the master cylinder when refilling. Water will significantly lower the boiling point of the fluid and may result in vapor lock. q 6-21
![](/manual_guide/autos/2002-yamaha-motorsports-virago-250-owners-manual-61b3f8e/60.png)