2003 Yamaha Motorsports Big Bear 400 Owners Manual - Page 114
2003 Yamaha Motorsports Big Bear 400 Manual
Page 114 highlights
EBU01181 Engine oil Engine oil level measurement 1. Place the ATV on a level surface. 2. Warm up the engine for several minutes, and then stop it. 3. Remove the engine oil filler cap, and then wipe the dipstick off with a clean rag. Insert the dipstick in the filler hole without screwing it in. 4. Remove the dipstick, and then check the oil level. NOTE: The oil level should be between the maximum and minimum level marks. _ _ 5. If the engine oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. CAUTION: _ Be sure no foreign material enters the crankcase. _ 1. Engine oil filler cap NOTE: Wait a few minutes until the oil level settles before checking. _ _ 8-5
![](/manual_guide/autos/2003-yamaha-motorsports-big-bear-400-owners-manual-7ff3dd8/114.png)
8-5
EBU01181
Engine oil
Engine oil level measurement
1.
Place the ATV on a level surface.
2.
Warm up the engine for several minutes,
and then stop it.
3.
Remove the engine oil filler cap, and then
wipe the dipstick off with a clean rag. In-
sert the dipstick in the filler hole without
screwing it in.
1.
Engine oil filler cap
NOTE:
_
Wait a few minutes until the oil level settles
before checking.
_
4.
Remove the dipstick, and then check the
oil level.
NOTE:
_
The oil level should be between the maximum
and minimum level marks.
_
5.
If the engine oil is below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct lev-
el.
CAUTION:
_
Be sure no foreign material enters the
crankcase.
_