2004 Yamaha Motorsports Big Bear 400 Owners Manual - Page 113
2004 Yamaha Motorsports Big Bear 400 Manual
Page 113 highlights
ITEM Wheels Wheel bearings Steering system Front and rear suspension* • Drive shaft universal joint* • • Fittings and fasteners* • • Lights and switches* • ROUTINE Check balance/damage/run out. Replace if necessary. Check bearing assemblies for looseness/damage. Replace if damaged. Check operation. Replace if damaged. Check toe-in. Adjust if necessary. Check operation. Correct if necessary. Lubricate with lithium-soap-based grease. Check all chassis fittings and fasteners. Correct if necessary. Check operation. Adjust headlight beams. 1 month INITIAL EVERY 3 6 6 1 months months months year * Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. NOTE: G Recommended brake fluid: DOT 4 G Brake fluid replacement: • When disassembling the master cylinder or caliper, replace the brake fluid. Normally check the brake fluid level and add fluid as required. • On the inner parts of the master cylinder and caliper, replace the oil seals every two years. • Replace the brake hoses every four years, or if cracked or damaged. WARNING Indicates a potential hazard that could result in serious injury or death. 8-4