2004 Yamaha Motorsports VMAX Owners Manual - Page 18
2004 Yamaha Motorsports VMAX Manual
Page 18 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU11090 EAU32320 EAU11630 High beam indicator light "HIGH BEAM" This indicator light comes on when the high beam of the headlight is switched on. EAU32330 3 Oil level warning light "OIL LEVEL" This warning light comes on when the engine oil level is low. The electrical circuit of the warning light can be checked according to the following procedure. 1. Set the engine stop switch to "RUN" and turn the key to "ON". 2. Shift the transmission into the neutral position or pull the clutch lever. 3. Push the start switch. If the warning light does not come on, have a Yamaha dealer check the electrical circuit. NOTE: Even if the oil level is sufficient, the warning light may flicker when riding on a slope or during sudden acceleration or deceleration, but this is not a malfunction. Fuel level warning light "FUEL" This warning light comes on when the fuel level drops below approximately 3.0 L (0.79 us.gal) (0.66 imp.gal). When this occurs, set the fuel reserve switch to the "RES" position and refuel as soon as possible. The electrical circuit of the warning light can be checked according to the following procedure. 1. Set the engine stop switch to "RUN" and turn the key to "ON". 2. Shift the transmission into the neutral position or pull the clutch lever. 3. Push the start switch. If the warning light does not come on, have a Yamaha dealer check the electrical circuit. Speedometer unit 1. Tripmeter reset knob 2. Odometer 3. Tripmeter The speedometer unit is equipped with a speedometer, an odometer and a tripmeter. The speedometer shows riding speed. The odometer shows the total distance traveled. The tripmeter shows the distance traveled since it was last set to zero with the reset knob. The tripmeter can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. 3-2