2004 Yamaha Motorsports Vino Owners Manual - Page 20
2004 Yamaha Motorsports Vino Manual
Page 20 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU11000 EAU32440 EAU11630 Indicator and warning lights 1 2 3 4 5 6 7 8 9 123 1. 2-stroke engine oil level warning light " " " " EAU11020 2. Turn signal indicator light " 3. High beam indicator light " Turn signal indicator light " " This indicator light flashes when the turn signal switch is pushed to the left or right. EAU11080 2-stroke engine oil level warning light " " The warning light comes on when the key is in the " " position or when the engine oil level in the 2-stroke engine oil tank is low during operation. If the warning light comes on during operation, stop immediately and fill the oil tank with YAMALUBE 2 or an equivalent 2-stroke engine oil. The warning light should go off after the 2-stroke engine oil tank has been refilled. NOTE: If the 2-stroke engine oil level warning light does not come on when the key is in the "ON" position or does not go off after the 2-stroke engine oil tank has been refilled, have a Yamaha dealer check the electrical circuit. ECA12720 Speedometer unit 2 1 3 4 1. Tripmeter reset knob 2. Speedometer 3. Odometer 4. Tripmeter High beam indicator light " " This indicator light comes on when the high beam of the headlight is switched on. CAUTION: Do not operate the vehicle until you know that the 2-stroke engine oil level is sufficient. The speedometer unit is equipped with a speedometer, an odometer and a tripmeter. The speedometer shows riding speed. The odometer shows the total distance traveled. The tripmeter shows the distance traveled since it was last set to zero with the reset knob. The tripmeter can be used to estimate the distance that can be traveled with a full tank of fuel. This information will enable you to plan future fuel stops. 3-2