2006 Yamaha Motorsports Apex RTX Owners Manual - Page 87
2006 Yamaha Motorsports Apex RTX Manual
Page 87 highlights
9. Replace the blown fuse with one of the proper amperage. Specified fuses: 40 A 0Main fuse: 10 A AFuel injection system fuse: 20 A B"HEAD" (Headlight) fuse: 10 A C"SIG" (Signal) fuse: 3A D"DC TERM" (Auxiliary DC jack) fuse: 20 A E"IGN" (Ignition) fuse: 3A F"BACK UP" (Backup) fuse: 4A G"FAN" (Radiator fan) fuse: H"ECS" (Electronically controlled rear shock absorber) fuse: 10 A (not applicable) I Spare fuses (20 A, 10 A, 4 A, 3 A) 10. Connect the negative battery lead. 11. Install the air filter case by reversing the removal steps. 12. Install the headlight unit, making sure to insert the tabs on the headlight unit stay into the slots on the bottom of the headlight unit. 13. Install the headlight unit bolts, and then tighten them to the specified torque. Headlight unit bolt tightening torque: 3 Nm (0.3 m·kgf, 2.2 ft·lb) 14. Install the top cover, the left and right side covers, and the shroud. NOTE: @ If the fuse immediately blows again, ask a Yamaha dealer to inspect the snowmobile. @ 8-34