2007 Yamaha Motorsports V Star Custom Owners Manual - Page 78
2007 Yamaha Motorsports V Star Custom Manual
Page 78 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EAU24360 Front wheel EAU24600 2. Lift the wheel up between the fork legs. NOTE: Make sure that there is enough space between the brake pads before inserting the brake disc and that the slot in the speedometer gear unit fits over the retainer on the fork leg. 1. Wheel axle 2. Front wheel axle pinch bolt To remove the front wheel EWA10820 WARNING G G It is advisable to have a Yamaha dealer service the wheel. Securely support the motorcycle so that there is no danger of it falling over. 1. Disconnect the speedometer cable from the front wheel. 6 3. Lift the front wheel off the ground according to the procedure on page 6-34. 4. Pull the wheel axle out, and then remove the wheel. ECA11070 CAUTION: Do not apply the brake after the wheel has been removed together with the brake disc, otherwise the brake pads will be forced shut. 1. Speedometer cable 1. Speedometer gear unit 2. Speedometer cable 3. Retainer 2. Loosen the front wheel axle pinch bolt, then the wheel axle. EAU24932 To install the front wheel 1. Install the speedometer gear unit into the wheel hub so that the projections mesh with the slots. 6-35 3. Insert the wheel axle. 4. Lower the front wheel so that it is on the ground. 5. Tighten the wheel axle to the specified torque.