2008 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 23
2008 Yamaha Motorsports FX Nytro RTX Manual
Page 23 highlights
Control functions 3. Tighten the locknut securely after adjusting the brake lever. ESU10580 Parking brake lever When parking the snowmobile or starting the engine, apply the parking brake by moving the parking brake lever to the left. 1. Brake lever NOTE: When the brake lever is operated, the brake light will illuminate. ECS00060 CAUTION: Make sure that the brake lever end does not project out over the handlebar end. This will help prevent brake lever damage when the snowmobile is placed on its side for service. The brake lever is equipped with a position adjuster. To adjust the brake lever position: 1. Loosen the locknut. 2. While lightly pushing the brake lever in direction (a), finger tighten the adjusting bolt to set the brake lever to the desired position. 1. Parking brake lever To release the parking brake, move the parking brake lever to the right. EWS00060 WARNING G G Always set the parking brake before attempting to start the engine. Never run the snowmobile with the parking brake applied. This may overheat the brake disc and reduce braking ability. 1. Locknut 2. Adjusting bolt 17