2008 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 30
2008 Yamaha Motorsports FX Nytro RTX Manual
Page 30 highlights
Control functions ECS00730 CAUTION: Do not exceed 1,034 kPa (10.3 kgf/cm², 150 psi). 7. Install the air valve cap. NOTE: If the front suspension bottoms too easily or rolls too much during cornering, increase the air pressure by 34 kPa (0.3 kgf/cm², 5 psi). If the suspension is too firm and you want a more compliant ride, decrease the air pressure by 34 kPa (0.3 kgf/cm², 5 psi). ESU10921 Compression damping setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) Rebound damping force The rebound damping force of each ski shock absorber can be adjusted by turning the rebound damping force adjusting knob. To increase the rebound damping force, turn the adjusting knob in direction (a). To decrease the rebound damping force, turn the adjusting knob in direction (b). Adjusting the ski damping force (FX10) ECS00260 CAUTION: The damping forces for the left and right ski shock absorbers must be adjusted to the same settings. Uneven settings can cause poor handling and loss of stability. Compression damping force The compression damping force of each ski shock absorber can be adjusted by turning the compression damping force adjusting knob. To increase the compression damping force, turn the adjusting knob in direction (a). To decrease the compression damping force, turn the adjusting knob in direction (b). 1. Rebound damping force adjusting knob Rebound damping setting: Minimum (soft): 20 click(s) in direction (b)* Standard: 11 click(s) in direction (b)* Maximum (hard): 3 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) NOTE: The damping forces will not decrease past the minimum levels even if the adjusting knobs are turned out more than the minimum settings. 1. Compression damping force adjusting knob 24