2008 Yamaha Motorsports Phazer R-TX Owners Manual - Page 36
2008 Yamaha Motorsports Phazer R-TX Manual
Page 36 highlights
Control functions 2. Turn the control rod adjusting nut in direction (a) to increase weight transfer or direction (b) to decrease weight transfer. 1. Red paint area 2. Adjustable range 3. Standard position 3. Tighten the locknut while holding the control rod adjusting nut in place. Locknut tightening torque: 25 Nm (2.5 m·kgf, 18 ft·lb) ECS00310 CAUTION: G 1. Locknut 2. Control rod adjusting nut EWS00170 WARNING Never adjust the control rods beyond the maximum range indicated on the rods with red paint. G When using the two wrenches included in the owner's tool kit, make sure that they are situated at a right angle to the control rod as shown, and that they are tightly fitted to the locknut and the control rod adjusting nut. The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. 30