2008 Yamaha Motorsports Raider Owners Manual - Page 21
2008 Yamaha Motorsports Raider Manual
Page 21 highlights
INSTRUMENT AND CONTROL FUNCTIONS G The fuel gauge does not indicate the correct fuel level for the first 5 km/h (3 mi/h) after refueling. Odometer, tripmeters, fuel reserve tripmeter and clock from that point. In that case, push the "SELECT" switch to change the display between the various tripmeter and odometer modes in the following order: F-TRIP → TRIP A → TRIP B → ODO → F-TRIP To reset a tripmeter, select it by pushing the "SELECT" switch, and then push the reset switch for at least one second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically, and the display will return to the prior mode after refueling and traveling 5 km (3 mi). To set the clock: 1. Push the "SELECT" and reset switches together for at least three seconds. 2. When the hour digits start flashing, push the reset switch to set the hours. 3. Push the "SELECT" switch, and the minute digits will start flashing. 4. Push the reset switch to set the minutes. 5. Push the "SELECT" switch and then release it to start the clock. Self-diagnosis devices This model is equipped with a self-diagnosis device for various electrical circuits. If any of those circuits are defective, the engine trouble warning light will come on, and then the odometer/tripmeter/clock display will indicate a two-digit error code. If the odometer/tripmeter/clock display indicates any error codes, note the code number, and then have a Yamaha dealer check the vehicle. 3 1. Odometer/tripmeter/fuel reserve tripmeter/clock Push the "SELECT" switch to change the display between the odometer mode "ODO", the tripmeter modes "TRIP A" and "TRIP B" in the following order: ODO → TRIP A → TRIP B → ODO If the fuel level warning light comes on (see page 3-1), the odometer display will automatically change to the fuel reserve tripmeter mode "F-TRIP" and start counting the distance traveled 1. Clock 3-4