2008 Yamaha Motorsports Raider Owners Manual - Page 71
2008 Yamaha Motorsports Raider Manual
Page 71 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EAU24180 EAU24210 Tail/brake light This model is equipped with an LED type of tail/brake light. If the tail/brake light does not come on, have a Yamaha dealer check it. Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. 1. Do not touch the glass part of the bulb. 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 1. Screw 6 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 CAUTION: Do not overtighten the screws, otherwise the lens may break. 6-30