2009 Yamaha Motorsports RS Vector GT Owners Manual - Page 21
2009 Yamaha Motorsports RS Vector GT Manual
Page 21 highlights
Control functions G Do not use an automotive cigarette lighter or other accessory with a plug that gets hot because the jack can be damaged. Maximum rated capacity: DC 12 V, 2.5 A (30 W) 2. While lightly pushing the brake lever in direction (a), finger tighten the adjusting bolt to set the brake lever to the desired position. ESU10570 Brake lever The snowmobile is stopped by braking the entire drive system. Squeeze the brake lever towards the handlebar grip to stop the snowmobile. 1. Locknut 2. Adjusting bolt 3. Tighten the locknut securely after adjusting the brake lever. ESU10581 Parking brake lever When parking the snowmobile or starting the engine, apply the parking brake by moving the parking brake lever to the left. 1. Brake lever TIP When the brake lever is operated, the brake light will illuminate. ECS00060 NOTICE Make sure that the brake lever end does not project out over the handlebar end. This will help prevent brake lever damage when the snowmobile is placed on its side for service. 1. Parking brake lever To release the parking brake, move the parking brake lever to the right. RS90GT / RS90LTGT The brake lever is equipped with a position adjuster. To adjust the brake lever position: 1. Loosen the locknut. 15