2009 Yamaha Motorsports Raider Owners Manual - Page 66
2009 Yamaha Motorsports Raider Manual
Page 66 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT battery tends to discharge more quickly if the vehicle is equipped with optional electrical accessories. ECA16520 NOTICE To charge a VRLA (Valve Regulated Lead Acid) battery, a special (constant-voltage) battery charger is required. Using a conventional battery charger will damage the battery. If you do not have access to a constant-voltage battery charger, have a Yamaha dealer charge your battery. To store the battery 1. If the vehicle will not be used for more than one month, remove the battery, fully charge it, and then place it in a cool, dry place. NOTICE: When removing the battery, be sure the key is turned to "OFF", then disconnect the negative lead before disconnecting the positive lead. [ECA16302] 2. If the battery will be stored for more than two months, check it at least once a month and fully charge it if necessary. 3. Fully charge the battery before installation. 4. After installation, make sure that the battery leads are properly connected to the battery terminals. 5. Install the wire harness protective cover. TIP Be sure the wire harness protective cover is installed, so that it is completely wrapped around the wire harness and the top flaps are closed. ECA16530 7 1. Positive battery lead (red) 2. Negative battery lead (black) 3. Battery NOTICE Always keep the battery charged. Storing a discharged battery can cause permanent battery damage. To charge the battery Have a Yamaha dealer charge the battery as soon as possible if it seems to have discharged. Keep in mind that the 7-25