2009 Yamaha Motorsports Raider Owners Manual - Page 68

2009 Yamaha Motorsports Raider Manual

Get 2009 Yamaha Motorsports Raider PDF manuals and user guides View all 2009 Yamaha Motorsports Raider manuals

Page 68 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT EAU23794 Specified fuses: Main fuse: 50.0 A Headlight fuse: 20.0 A Signaling system fuse: 10.0 A Taillight fuse: 7.5 A Ignition fuse: 25.0 A Fuel injection system fuse: 15.0 A Backup fuse: 7.5 A Auxiliary DC connector fuse: 3.0 A Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. ECA10660 NOTICE Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. 1. Screw 2. Disconnect the headlight coupler, and then remove the bulb cover. 7 4. Turn the key to "ON" and turn on the electrical circuit in question to check if the device operates. 5. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. 6. Install the battery cover, and then hook the battery band onto the holder. 1. Do not touch the glass part of the bulb. 1. Headlight coupler 2. Headlight bulb cover 1. Remove the headlight unit by removing the screws. 7-27 3. Unhook the headlight bulb holder, and then remove the burnt-out bulb.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
PERIODIC MAINTENANCE AND ADJUSTMENT
7-27
7
4.
Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
5. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
6.
Install the battery cover, and then
hook the battery band onto the
holder.
EAU23794
Replacing the headlight bulb
This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA10660
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
1. Remove the headlight unit by re-
moving the screws.
2.
Disconnect the headlight coupler,
and then remove the bulb cover.
3.
Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
Specified fuses:
Main fuse:
50.0 A
Headlight fuse:
20.0 A
Signaling system fuse:
10.0 A
Taillight fuse:
7.5 A
Ignition fuse:
25.0 A
Fuel injection system fuse:
15.0 A
Backup fuse:
7.5 A
Auxiliary DC connector fuse:
3.0 A
1.
Do not touch the glass part of the bulb.
1. Screw
1.
Headlight coupler
2.
Headlight bulb cover