2009 Yamaha Motorsports V Star 250 Owners Manual - Page 19
2009 Yamaha Motorsports V Star 250 Manual
Page 19 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU12410 EAU12691 EAU12820 Dimmer switch "LIGHTS" Set the switch to "HI" for the high beam and to "LO" for the low beam. EAU12440 Turn signal switch "TURN" To signal a right-hand turn, push this switch to the right. To signal a left-hand turn, push this switch to the left. When released, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position. EAU12510 Start switch "START" Push this switch to crank the engine with the starter. See page 6-1 for starting instructions prior to starting the engine. Clutch lever 4 1. Clutch lever Horn switch "HORN" Press this switch to sound the horn. EAU12650 Engine stop switch "ENGINE STOP" Set this switch to "RUN" before starting the engine. Set this switch to "OFF" to stop the engine in case of an emergency, such as when the vehicle overturns or when the throttle cable is stuck. The clutch lever is located at the left handlebar grip. To disengage the clutch, pull the lever toward the handlebar grip. To engage the clutch, release the lever. The lever should be pulled rapidly and released slowly for smooth clutch operation. The clutch lever is equipped with a clutch switch, which is part of the ignition circuit cut-off system. (See page 4-11.) 4-3