2010 Yamaha Motorsports C3 Owners Manual - Page 46

2010 Yamaha Motorsports C3 Manual

Get 2010 Yamaha Motorsports C3 PDF manuals and user guides View all 2010 Yamaha Motorsports C3 manuals

Page 46 highlights

Coolant PERIODIC MAINTENANCE AND ADJUSTMENT 1 1 2 3 4 5 6 7 8 9 torque. WARNING! Make sure that no foreign material enters the final transmission case. Make sure that no oil gets on the tire or wheel.[EWA11311] Tightening torque: Final transmission oil filler bolt: 23 Nm (2.3 m • kgf, 16.6 ft • lbf) Recommended final transmission oil: See page 8-1. Oil quantity: 0.10 L (0.11 US qt, 0.08 Imp.qt) EAU1722A EAU20070 Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAUT1523 2 ZAUM00** 1. Final transmission oil filler bolt 2. Final transmission oil drain bolt 4. Remove the oil filler bolt and drain bolt to drain the oil from the final transmission case. 5. Install the final transmission oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final transmission oil drain bolt: 13 Nm (1.3 m • kgf, 9.4 ft • lbf) 7. Check the final transmission case for oil leakage. If oil is leaking, check for the cause. To check the coolant level The coolant level should be checked as follows before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. 1. Place the vehicle on the centerstand. TIP 8 The coolant level must be checked on a cold engine since the level varies with engine temperature. 8 Make sure that the vehicle is positioned straight up when checking the coolant level. A slight tilt to the side can result in a false reading. 2. Check the coolant level in the coolant reservoir. 6. Refill with the specified amount of the recommended final transmission oil, and then install the oil filler bolt and tighten it to the specified 6-46 6-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
6-46
1
2
3
4
5
6
7
8
9
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
6-11
ZAUM00**
1
2
1.
Final transmission oil filler bolt
2.
Final transmission oil drain bolt
4.
Remove the oil filler bolt and drain
bolt to drain the oil from the final
transmission case.
5. Install the final transmission oil
drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Final transmission oil drain bolt:
13 Nm (1.3 m • kgf, 9.4 ft • lbf)
6.
Refill with the specified amount of
the recommended final transmis-
sion oil, and then install the oil filler
bolt and tighten it to the specified
torque.
WARNING! Make sure that
no foreign material enters the fi-
nal transmission case. Make sure
that no oil gets on the tire or
wheel.
[EWA11311]
Tightening torque:
Final transmission oil filler bolt:
23 Nm (2.3 m • kgf, 16.6 ft • lbf)
Recommended final transmission oil:
See page 8-1.
Oil quantity:
0.10 L (0.11 US qt, 0.08 Imp.qt)
7.
Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
EAU20070
Coolant
The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
Coolant<IXE>
EAUT1523
To check the coolant level
The coolant level should be checked as
follows before each ride. In addition, the
coolant must be changed at the inter-
vals specified in the periodic mainte-
nance and lubrication chart.
1. Place
the
vehicle
on
the
centerstand.
TIP
8
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
8
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2.
Check the coolant level in the cool-
ant reservoir.