2010 Yamaha Motorsports FX Nytro MTX Owners Manual - Page 25
2010 Yamaha Motorsports FX Nytro MTX Manual
Page 25 highlights
Control functions ECS00830 NOTICE Never run the engine with the V-belt removed. Clutch components can be damaged. The drive guard is designed to protect the Vbelt clutch and V-belt in case parts break or come loose. The drive guard is located behind the left side cover. (See page 46 for removal procedures.) 1 1. Drive guard 1 2. Align the slots in the rear of the drive guard with the projections on the drive guard rear holder, and then insert the drive guard locking pin into the holder. 2 1 1. Drive guard 2. Drive guard locking pin To remove the drive guard 1. Pull out the drive guard locking pin from the drive guard rear holder. 2. Lift up the rear of the drive guard as shown, and then pull the guard rearward to remove it. 2 1. Drive guard 2. Drive guard locking pin ESU13042 Storage pouch The storage pouch is located under the shroud. Use the storage pouch to store the tool kit, manuals, spare parts, such as the Vbelt, or other small items. To install the drive guard 1. Insert the projections on the drive guard front holder into the slots in the front of the drive guard. 19