2010 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 81

2010 Yamaha Motorsports Grizzly 125 Automatic Manual

Get 2010 Yamaha Motorsports Grizzly 125 Automatic PDF manuals and user guides View all 2010 Yamaha Motorsports Grizzly 125 Automatic manuals

Page 81 highlights

Tightening torque: Transmission oil drain bolt: 23 Nm (2.3 m·kgf, 16.6 ft·lbf) 6. Refill with the specified amount of the recommended transmission oil, and then install and tighten the oil filler bolt. NOTICE: Make sure that no foreign material enters the transmission case.[ECB00791] Recommended transmission oil: See page 10-1. Oil quantity: 0.6 L (0.63 US qt, 0.53 Imp.qt) Tightening torque: Transmission oil filler bolt: 23 Nm (2.3 m·kgf, 16.6 ft·lbf) ECB01061 off the engine and check for the cause. 8. Turn the engine off, and then check the oil level and correct it if necessary. EBU23843 1 2 3 4 5 6 7 8 9 10 11 Cleaning the engine and V-belt case air filter elements Both air filter elements should be cleaned at the specified intervals in the periodic maintenance chart. Engine air filter element TIP There is a check hose at the bottom of the air filter case. If dust or water collects in this hose, empty the hose and clean the air filter element and air filter case. NOTICE Make sure that no oil gets on the tires or wheels. 7. Start the engine, and then let it idle for several minutes while checking the transmission for oil leakage. If oil is leaking, immediately turn 8-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
8-15
1
2
3
4
5
6
7
8
9
10
11
6.
Refill with the specified amount of the recom-
mended transmission oil, and then install and
tighten the oil filler bolt.
NOTICE:
Make sure
that no foreign material enters the trans-
mission case.
[ECB00791]
NOTICE
ECB01061
Make sure that no oil gets on the tires or
wheels.
7.
Start the engine, and then let it idle for several
minutes while checking the transmission for
oil leakage. If oil is leaking, immediately turn
off the engine and check for the cause.
8.
Turn the engine off, and then check the oil lev-
el and correct it if necessary.
EBU23843
Cleaning the engine and V-belt case air
filter elements
Both air filter elements should be cleaned at the
specified intervals in the periodic maintenance
chart.
Engine air filter element
TIP
There is a check hose at the bottom of the air filter
case. If dust or water collects in this hose, empty
the hose and clean the air filter element and air fil-
ter case.
Tightening torque:
Transmission oil drain bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
Recommended transmission oil:
See page 10-1.
Oil quantity:
0.6 L (0.63 US qt, 0.53 Imp.qt)
Tightening torque:
Transmission oil filler bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)