2010 Yamaha Motorsports Grizzly 350 Auto. 4x4 IRS Owners Manual - Page 23
2010 Yamaha Motorsports Grizzly 350 Auto. 4x4 IRS Manual
Page 23 highlights
EBU18101 EBU28432 Start switch " " Push this switch to crank the engine with the starter. See the starting instructions on page 6-1 prior to starting the engine. EBU18152 On-Command four-wheel-drive switch "2WD"/"4WD" EWB00163 Light switch " / /OFF" Set this switch to " " to turn on the low beams and the taillight. Set the switch to " " to turn on the high beams and the taillight. Set the switch to "OFF" to turn off all the lights. ECB00041 NOTICE Do not use the headlights with the engine turned off for an extended period of time, otherwise the battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. See page 8-38 for battery charging information. WARNING Always stop the ATV before changing from two-wheel drive to four-wheel drive and vice versa. The ATV handles differently in twowheel drive than in four-wheel drive in some circumstances. Changing from two-wheel drive to four-wheel drive or vice versa while moving may cause the ATV to unexpectedly handle differently. This could distract the operator and increase the risk of losing control and of causing an accident. This ATV is equipped with a switch to change from two-wheel drive to four-wheel drive and vice versa. Select the appropriate drive according to the terrain and the conditions. G "2WD" (two-wheel drive): Power is supplied to the rear wheels. G "4WD" (four-wheel drive): Power is supplied to the rear and front wheels. 4 4-4
![](/manual_guide/autos/2010-yamaha-motorsports-grizzly-350-auto-4x4-irs-owners-manual-ba1facb/23.png)