2011 Yamaha Motorsports Vino Classic Owners Manual - Page 47

2011 Yamaha Motorsports Vino Classic Manual

Page 47 highlights

EAU1722A PERIODIC MAINTENANCE AND ADJUSTMENT EAUT1561 Final transmission oil The fi nal transmission case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the scooter. In addition, the final transmission oil must be changed as follows at the intervals specified in the periodic maintenance and lubrication chart. 1. Start the engine, warm it up by riding the scooter for several minutes, and then stop the engine. 2. Place the scooter on the centerstand. 3. Place an oil pan under the fi nal transmission case to collect the used oil. 2 1 Make sure that no foreign material enters the final transmission case. Make sure that no oil gets on the tire or wheel.[EWA11311] Tightening torque: Final transmission oil filler bolt: 23 Nm (2.3 m·kgf, 16.6 ft·lbf) 1 2 3 ZAUM00** 1. Final transmission oil filler bolt 2. Final transmission oil drain bolt 4. Remove the oil filler bolt and drain bolt to drain the oil from the final transmission case. 5. Install the fi nal transmission oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final transmission oil drain bolt: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) Recommended fi nal transmission oil: See page 8-1. Oil quantity: 0.1 L (0.11 US qt, 0.08 Imp.qt) 4 5 6 7 8 9 7. Check the final transmission case for oil leakage. If oil is leaking, check for the cause. 6. Refi ll with the specifi ed amount of the recommended fi nal transmission oil, and then install the oil fi ller bolt and tighten it to the specifi ed torque. WARNING! 6-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

1
2
3
4
5
6
7
8
9
6-11
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUT1561
Final transmission oil
The fi nal transmission case must be
checked for oil leakage before each
ride. If any leakage is found, have a
Yamaha dealer check and repair the
scooter. In addition, the final transmis-
sion oil must be changed as follows at
the intervals specifi ed in the periodic
maintenance and lubrication chart.
1. Start the engine, warm it up by
riding the scooter for several min-
utes, and then stop the engine.
2. Place the scooter on the center-
stand.
3. Place an oil pan under the fi nal
transmission case to collect the
used oil.
2
1
ZAUM00**
1.
Final transmission oil filler bolt
2.
Final transmission oil drain bolt
4. Remove the oil filler bolt and drain
bolt to drain the oil from the fi nal
transmission case.
5. Install the fi nal transmission oil
drain bolt, and then tighten it to
the specified torque.
Tightening torque:
Final transmission oil drain bolt:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)
6. Refi
ll with the specifi ed amount
of the recommended fi nal trans-
mission oil, and then install the
oil filler bolt and tighten it to the
specifi ed torque.
WARNING!
Make sure that no foreign ma-
terial enters the fi nal transmis-
sion case. Make sure that no oil
gets on the tire or wheel.
[EWA11311]
Tightening torque:
Final transmission oil filler bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
Recommended fi nal transmission
oil:
See page 8-1.
Oil quantity:
0.1 L (0.11 US qt, 0.08 Imp.qt)
7. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.