2012 Yamaha Motorsports FX Nytro M-TX 153 Owners Manual - Page 23

2012 Yamaha Motorsports FX Nytro M-TX 153 Manual

Page 23 highlights

Control functions G Do not use an automotive cigarette lighter or other accessory with a plug that gets hot because the jack can be damaged. Maximum rated capacity: DC 12 V, 2.5 A (30 W) ESU13523 Brake lever The snowmobile is stopped by braking the entire drive system. Squeeze the brake lever towards the handlebar grip to stop the snowmobile. 1. Locknut 2. Adjusting bolt 3. Tighten the locknut securely after adjusting the brake lever position. ESU10581 Parking brake lever When parking the snowmobile or starting the engine, apply the parking brake by moving the parking brake lever to the left. 1. Brake lever TIP When the brake lever is squeezed, the brake light comes on. The brake lever is equipped with a position adjuster. 1. Parking brake lever To adjust the brake lever position 1. 2. Loosen the locknut. While lightly pushing the brake lever in direction (a), turn the adjusting bolt to set the brake lever to the desired position. To release the parking brake, move the parking brake lever to the right. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Control functions
17
Do not use an automotive cigarette light-
er or other accessory with a plug that
gets hot because the jack can be dam-
aged.
ESU13523
Brake lever
The snowmobile is stopped by braking the en-
tire drive system.
Squeeze the brake lever towards the handle-
bar grip to stop the snowmobile.
TIP
When the brake lever is squeezed, the brake
light comes on.
The brake lever is equipped with a position
adjuster.
To adjust the brake lever position
1.
Loosen the locknut.
2.
While lightly pushing the brake lever in di-
rection (a), turn the adjusting bolt to set
the brake lever to the desired position.
3.
Tighten the locknut securely after adjust-
ing the brake lever position.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
Maximum rated capacity:
DC 12 V, 2.5 A (30 W)
1.
Brake lever
1. Locknut
2.
Adjusting bolt
1.
Parking brake lever