2012 Yamaha Motorsports Grizzly 450 4x4 EPS Owners Manual - Page 129
2012 Yamaha Motorsports Grizzly 450 4x4 EPS Manual
Page 129 highlights
EBU29881 EBU24902 Brake light switches The brake light, which is activated by the brake pedal and brake levers, should come on just before braking takes effect. The rear brake light switch for the brake pedal can be adjusted as follows, but the other brake light switches should be adjusted by a Yamaha dealer. Turn the rear brake light switch adjusting nut while holding the brake light switch in place. To make the brake light come on earlier, turn the adjusting nut in direction (a). To make the brake light come on later, turn the adjusting nut in direction (b). Checking and lubricating the cables The operation and the condition of all control cables should be checked before each ride, and the cables and cable ends should be lubricated if necessary. If a cable is damaged or does not move smoothly, have a Yamaha dealer check or replace it. Recommended lubricant: Yamaha Chain and Cable Lube or engine oil EWB02581 1 (a) 2 (b) G G 1. Rear brake light switch 2. Rear brake light switch adjusting nut 8-47 WARNING Inspect cables frequently and replace if damaged. Corrosion can result when the cable sheaths become damaged, and cables can also become frayed or kinked, which could restrict the operation of controls and lead to an accident or injury. Always make sure all control cables work smoothly before you begin riding in cold weather. If the control cables are frozen or do not work smoothly, you could be unable to control the ATV, which could lead to an accident or collision. 8