2012 Yamaha Motorsports Grizzly 450 4x4 EPS Owners Manual - Page 41
2012 Yamaha Motorsports Grizzly 450 4x4 EPS Manual
Page 41 highlights
EBU18962 Front carrier G G Do not exceed the load limit of 40.0 kg (88 lb) for the front carrier. Do not exceed the maximum load of 210.0 kg (463 lb) for the ATV. 1 2 4 EBU18972 Rear carrier G G Do not exceed the load limit of 80.0 kg (176 lb) for the rear carrier. Do not exceed the maximum load of 210.0 kg (463 lb) for the ATV. 1. Auxiliary DC jack cap 2. Auxiliary DC jack EBU19183 Auxiliary DC jack The auxiliary DC jack is located at the front right side of the ATV. The auxiliary DC jack can be used for suitable work lights, radios, etc. The auxiliary DC jack should only be used when the engine is running and the light switch is set to "OFF". 1. Set the light switch to "OFF". 2. Turn the accessory off. 3. Start the engine. (See page 6-1.) 4. Open the auxiliary DC jack cap, and then insert the accessory power plug into the jack. Maximum rated capacity for the auxiliary DC jack: DC 12 V, 10 A (120 W) 5. Turn the accessory on. 6. When the auxiliary DC jack is not being used, cover it with the cap. ECB00120 NOTICE G Do not use accessories requiring more than the above maximum capacity. This may overload the circuit and cause the fuse to blow. 4-22