2012 Yamaha Motorsports VMAX Owners Manual - Page 22
2012 Yamaha Motorsports VMAX Manual
Page 22 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU51661 TIP ● For radiator-fan-equipped vehicles, the radiator fan(s) automatically switch on or off according to the coolant temperature in the radiator. ● If the engine overheats, see page 7-44 for further instructions. 4 EAU42774 Engine trouble warning light " " This warning light comes on if a problem is detected in the electrical circuit monitoring the engine. If this occurs, have a Yamaha dealer check the selfdiagnosis system. (See page 4-14 for an explanation of the self-diagnosis device.) The electrical circuit of the warning light can be checked by turning the key to "ON". The warning light should come on for a few seconds, and then go off. If the warning light does not come on initially when the key is turned to "ON", or if the warning light remains on, have a Yamaha dealer check the electrical circuit. ABS warning light " " In normal operation, the ABS warning light comes on when the key is turned to "ON", and goes off after traveling at a speed of 10 km/h (6 mi/h) or higher. If the ABS warning light: ● does not come on when the key is turned to "ON" ● comes on or flashes while riding ● does not go off after traveling at a speed of 10 km/h (6 mi/h) or higher The ABS may not work correctly. If any of the above occurs, have a Yamaha dealer check the system as soon as possible. (See page 4-18 for an explanation of the ABS.) ABS braking. Have a Yamaha dealer check the brake system and electrical circuits as soon as possible. TIP If the start switch is pushed while the engine is running, the ABS warning light will come on, but this is not a malfunction. EAU48520 EWA16040 WARNING If the ABS warning light does not go off after traveling at a speed of 10 km/h (6 mi/h) or higher, or if the warning light comes on or flashes while riding, the brake system reverts to conventional braking. If either of the above occurs, or if the warning light does not come on at all, use extra caution to avoid possible wheel lock during emergency 4-4 Shift timing indicator light This indicator light can be set to come on and go off at the desired engine speeds and is used to inform the rider when it is time to shift to the next higher gear. The electrical circuit of the indicator light can be checked by turning the key to "ON". The indicator light should come on for a few seconds, and then go off. If the indicator light does not come on initially when the key is turned to "ON", or if the indicator light remains on, have a Yamaha dealer check the electrical circuit. (See page 4-7 for a detailed explanation of the function of this indicator light and on how to set it.)