3Com 3C6090 User Guide - Page 13

Installing Software 1-7 3 Verify that configurable parameters of your console match the configuration settings of the Console port specified in Table 1-1. Table 1-1 Console Port Configuration Settings Characteristic Baud rate Databits Parity Stop bits DTR Duplex Echo Flow control Setting 9600 8 None 1 Ignored Full Off X-on/X-off 4 Turn on the console. Installing Software If you have the software from 3Com preinstalled on a flash memory card, remove the flash memory drive cover if present and insert the card into drive A, the top flash memory drive. The default boot and configuration file paths are set to a directory on drive A. See the next section to remove and reinstall the flash memory drive cover.