3Com 3C63502A-NC Reference Guide - Page 99

Viewing and Modifying IMA and UNI Groups, Deleting IMA and UNI Groups, 1] List/Modify Group

Page 99 highlights

Configuring the T1/E1 Interface 85 Viewing and Modifying IMA and UNI Groups Once you have added a group, you use the List/Modify Group menu to view and modify group configuration parameters. To view and/or modify an existing group: 1 From the Group menu, shown in Figure 70, select [1] List/Modify Group to open the List/Modify Group Selection menu. 2 Enter the number corresponding to the group you want to view or modify to open the List/Modify Group menu for that group. Figure 76 shows the List/Modify Group menu for an IMA group. The List/Modify Group menu for a UNI group is similar, but it lists only the parameters you can set for UNI groups: Admin Ports and Admin Status. Figure 76 Modifying an Existing IMA Group 3 If the Admin. Status of the group is In Service, select [10] Set Admin. Status and enter 1 to take the group out of service. You must take the group out of service before you can modify it. 4 Change any of the group parameters as desired. Deleting IMA and UNI Groups To delete an existing IMA or UNI group: 1 From the Group menu, shown in Figure 70, select [3] Delete Group to open the Delete Group Selection menu. 2 Enter the number corresponding to the group you want to delete to open the Delete Group menu, shown in Figure 77. This menu lists the parameters for the selected group and warns you that deleting the group will delete any virtual circuits using that group.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300

Configuring the T1/E1 Interface
85
Viewing and Modifying IMA and UNI Groups
Once you have added a group, you use the List/Modify Group menu to view and
modify group configuration parameters.
To view and/or modify an existing group:
1
From the Group menu, shown in Figure 70, select
[1] List/Modify Group
to open
the List/Modify Group Selection menu.
2
Enter the number corresponding to the group you want to view or modify to open
the List/Modify Group menu for that group. Figure 76 shows the List/Modify
Group menu for an IMA group. The List/Modify Group menu for a UNI group is
similar, but it lists only the parameters you can set for UNI groups:
Admin Ports
and
Admin Status
.
Figure 76
Modifying an Existing IMA Group
3
If the Admin. Status of the group is In Service, select
[10] Set Admin. Status
and
enter
1
to take the group out of service.
You must take the group out of service before you can modify it.
4
Change any of the group parameters as desired.
Deleting IMA and UNI Groups
To delete an existing IMA or UNI group:
1
From the Group menu, shown in Figure 70, select
[3] Delete Group
to open the
Delete Group Selection menu.
2
Enter the number corresponding to the group you want to delete to open the
Delete Group menu, shown in Figure 77. This menu lists the parameters for the
selected group and warns you that deleting the group will delete any virtual
circuits using that group.