3Com 3CDSG8-US User Guide - Page 83
IP tftpget, IP] dhcp, Parameters, Default Configuration, User Guidelines, enable, Example, Syntax - default login
UPC - 662705533162
View all 3Com 3CDSG8-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
CLI Reference Guide 83 [IP] dhcp [enable] [disable] Parameters • enable - enables the dhcp function • disable - disables the switch from using a dhcp server to obtain an IP address. The switch will revert to the manually assigned IP address Default Configuration Entering this command without any parameters will display the current status of the dhcp mode. User Guidelines Setting dhcp to enable will override any manual IP address settings that may have been assigned. Example The following displays the list presented for the IP dhcp command: IP>dhcp enable Reply from 192.168.1.1, packet Reply from 192.168.1.1, packet IP> 1, time 2, time 7 ms 8 ms IP tftpget The IP tftpget command starts a firmware download for system upgrading or replacing corrupted firmware. Syntax [IP] tftpget Parameters • tftp server ip address - the address of the workstation hosting the tftp server • filename - the name of the software to be downloaded. Default Configuration This command has no default configuration. User Guidelines The TFTP server IP address and the software image file name on the server must be specified. During the upgrade process, a series of '.' symbols appear representing the upgrade process in the CLI interface. When the upgrade process is completed, the switch will re-boot. Press Return for the login prompt.