3Com 3CRWEASY96A User Guide - Page 15
Onnecting, Ridge
UPC - 662705458823
View all 3Com 3CRWEASY96A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CONNECTING THE BRIDGE TO THE LAN You can connect to the LAN either through the 3Com power supply or through IEEE 802.3af power-over-Ethernet compliant equipment. USING THE POWER SUPPLY The power supply can be located indoors at any point between the bridge and the LAN access port where an accessible power outlet exists. Connect the cable coming from the bridge to the port labeled To Access Point on the power supply. Connect another Ethernet cable from the port labeled To Hub/Switch on the power supply to an Ethernet LAN port, as shown. CAUTION: To avoid damaging network equipment, make sure that the cables are connected from bridge to power supply to LAN as shown and described above. USING A POWER-OVER-ETHERNET LAN PORT If your LAN equipment complies with the IEEE 802.3af power-over-Ethernet standard, you can connect the bridge directly to a LAN port. For example, the 15