3Com 3CRWER100-75 User Guide - Page 31
Clone MAC Address screen displays., Dynamic IP Address Mode - mtu
UPC - 662705500089
View all 3Com 3CRWER100-75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Accessing the Wizard 35 Do not enter anything in this box if your ISP does not require a service name. 4 Enter the MTU value supplied by your ISP in the MTU text box. If your ISP has not supplied an MTU value, leave this at the default value. The default is 1454. 5 Select an idle time from the Maximum Idle Time drop down list. This is the amount of time without Internet activity that you want to allow before the Router ends the PPPoE session. 6 Check all of your settings, and then click Next. Dynamic IP Address Mode To setup the Router for use with a dynamic IP address connection: 1 Select the ISP provides configuration dynamically (via DHCP) and then click Next. Figure 18 Hostname Screen 2 Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box (Figure 18) and click Next. The Clone MAC Address screen displays. Figure 19 Clone MAC Address Screen