3M CP45B User Manual - Page 25

English Troubleshooting If your Camcorder Projector does not seem to be functioning properly, check the items below before you contact an authorized service center. Symptom Check Point The Camcorder Projector can't be turned on. The projected image is too dark. The projected image is blurry. The image is not played. No image is projected when an AV device is connected. • Ensure the battery is fully charged or the AC power adapter is properly connected. • Use the Camcorder Projector in a darker environment. • Project the image on a flat, white surface. • Decrease the size of projected image. • Adjust the focus. Please refer to "Adjusting the Focus" section. • Check if the lens is dirty. • Replace with an image of higher resolution. • Ensure the image format is compatible. • Replace with another file or memory card. • Convert the file with the attached AMC software. • Ensure the connected device is equipped with AV-out function. • Check if the AV Cable is connected, and the Camcorder Projector is switched to AV-in function. • Check if the AV Cable is plugged in correctly. The surface temperature of the Camcorder Projector feels warm. It is normal for this Camcorder Projector to generate moderate heat during normal operation. 19