3M X55 Operation Guide - Page 32
3M X55 Manual
View all 3M X55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Multifunctional settings SETUP Menu With the SETUP menu, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data Lower in the data • The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well. • When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible. Using the buttons ▲/▼ turns off/on the whisper mode. NORMAL WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. Using the buttons ▲/▼ switches the mode for mirror status. MIRROR NORMAL H:INVERT V:INVERT H&V:INVERT VOLUME Using the buttons ▲/▼ adjusts the volume. High Low MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU KEYSTONE WHISPER MIRROR VOLUME :SELECT +0 NORMAL NORMAL 16 KEYSTONE WHISPER 32 © 3M 2004 3M™ Digital Projector X45/SX55