3M X76 Safety Guide - Page 5

ENGLISH Safety Information Read, understand, and follow all safety information contained in the "Product Safety Guide" and in the "Operator's Guide" prior to using the X76 Digital Projector. Service personnel must also read and understand the safety information contained in the "Service Manual". Retain these instructions for future reference. Intended Use The 3M™ Digital Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and common line voltages (100V to 240V AC, 50/60 Hz). The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector, peripheral equipment and/or create a potentially unsafe operating condition. 0'LJLWDO3URMHFWRUVDUHGHVLJQHGWRRSHUDWHLQDQRUPDORI¿FHHQYLURQPHQW 100V - 240V AC, 50/60 Hz 16° to 29° C (60° to 85° F) 10-80% RH (without condensation) 0-1828m (0-6000 feet) above sea level The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can effect the operation or performance of the projector. Explanation of Signal Words and Symbols in Safety Labels and Instructions WARNING: CAUTION: Indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. Warning: Hazardous Voltage Warning: Hazardous High Temperature Warning: High Pressure Attention: Refer to Safety Instructions in Guides © 3M 2008. All rights reserved. 3M™ Digital Projector X76 Product Safety Guide 5