3Ware 8500-12 Installation Guide - Page 16
Check your installation and close the case, Check motherboard boot sequence
View all 3Ware 8500-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3ware Escalade ATA RAID Controller Installation Guide CBL-P-SATA (Parallel to Serial Converter) Figure 3. Parallel ATA Drive with Serial ATA Converter Installed Check your installation and close the case 1 After all of the drives are connected to the ATA RAID Controller and it is installed in its slot, verify that the cables do not interfere with the operation of any other components in the case or block the flow of cooling air. 2 Close the case and reconnect the power cables. Check motherboard boot sequence Using your computer's Setup utility, ensure that your boot device precedes the Escalade ATA RAID Controller in the boot sequence. If you have other disks installed on the motherboard, theATA RAID Controller precedes them in boot order. 22 www.3ware.com