3Ware 8500-12 Installation Guide - Page 32
Troubleshooting, Problems and Solutions
View all 3Ware 8500-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Troubleshooting Troubleshooting: Problems and Solutions Note: For more troubleshooting tips and frequently asked questions, refer to 3ware's support web page at http://www.3ware.com/support. Note: More troubleshooting problems and solutions can be found on the 3ware web site at http://www.3ware.com/NewFaq/3ware.htm. Hardware installation Q1: The rail on the ATA RAID controller doesn't fit in the case. Use a screwdriver to remove the black end rail. It aligns and secures the ATA RAID controller in the computer chassis but is not critical for operation. Q2: The system doesn't begin booting (no BIOS runs) when the ATA RAID controller is installed but boots OK when the controller is removed. Check the cabling between the drives and the ATA RAID controller. A cable plugged in upside down can prevent your system from running its BIOS. www.3ware.com 49